Peter Barker
7d10b0fc4d
GCS_MAVLink: add and use AP_HOME_ENABLED
2024-04-17 18:09:25 +10:00
Brad Bosch
6538e8c9ae
GCS_MAVLink: Cleanup and Reduce chance of GCS FTP timeout
...
Delete unneeded orphan comment
replace get_last_txbuf() with a predicate
Make txbuf flow control threashold consistent between Parameter download and FTP and keep it in range where we are also slowing down normal streams
Delay sending text banner until after first FTP response to reduce latency on slow links
Don't let flow control delay setting ftp.last_send_ms so as to slow down normal streams as soon as possible to improve FTP response time
2024-04-16 09:16:52 +10:00
Brad Bosch
bbfb0ed001
GCS_MAVLink: Make get_last_txbuf() safer
...
Add check for stale radio_status to get_last_txbuf()
Move last_txbuf into last_radio_status struct
2024-04-16 09:16:52 +10:00
Peter Barker
420f80db75
GCS_MAVLink: move handling of DO_SET_HOME up to GCS_MAVLink base class
2024-04-09 09:35:16 +10:00
Peter Barker
abd5d0e3e9
GCS_MAVLink: cope with AHRS not being available
2024-03-19 07:00:10 +11:00
olliw42
0bb98c3db5
GCS_MAVLink: handle RADIO_RC_CHANNELS
2024-03-09 10:47:39 +11:00
Peter Barker
d6df142eaa
GCS_MAVLink: allow FTP to be compiled out with build_options.py
2024-03-03 08:38:22 +11:00
Peter Barker
0fe9027b23
GCS_MAVLink: handle MAV_CMD_DO_SET_SAFETY_SWITCH_STATE
2024-02-27 21:10:39 +11:00
Andrew Tridgell
632bb71c87
GCS_MAVLink: use can_printf_severity() for AP_Periph
2024-02-22 15:03:01 +11:00
Peter Barker
e787fc5dfd
GCS_MAVLink: allow AP_Periph to use mavlink library
2024-02-15 12:17:07 +11:00
Peter Barker
f1457034e2
GCS_MAVLink: provide and use base-method implementation for guided mode request
2024-02-06 11:07:48 +11:00
Peter Barker
5e5bca2bba
GCS_MAVLink: handle RADIO_STATUS is GCS base class
2024-01-24 18:43:15 +11:00
Peter Barker
f18e196fa9
GCS_MAVLink: use virtual method for GCS_MAVLink::handle_message
...
use more appropriate naming for the method.
2024-01-24 09:07:41 +11:00
Andrew Tridgell
4289a4bb3a
GCS_MAVLink: added AP_HAVE_GCS_SEND_TEXT
2024-01-21 12:30:08 +11:00
Peter Barker
78087da03c
GCS_MAVLink: correct compilation when AP_MISSION_ENABLED is false
2024-01-03 16:16:47 +11:00
Peter Barker
4dae077787
GCS_MAVLink: return MAV_RESULT_COMMAND_INT_ONLY if command-long support not compiled in
2024-01-02 18:58:07 +11:00
Peter Barker
6d172a1b22
GCS_MAVLink: exclude deadlock-creation based on FAILURE_CREATION_ENABLED
2023-11-21 09:35:50 +09:00
Peter Barker
6f5ff2f952
GCS_MAVLink: tidy sending of HIGH_LATENCY2 messages
2023-11-20 19:25:25 +11:00
Peter Barker
a8906ac491
GCS_MAVLink: tidy sending of winch messages
2023-11-20 19:25:25 +11:00
Peter Barker
9ff9f8d216
GCS_MAVLink: remove no-longer-required location_from_command_t(command_long)
2023-11-16 10:50:21 +11:00
Peter Barker
485fa80f1c
GCS_MAVLink: collapse un-needed method
2023-11-16 10:50:21 +11:00
Peter Barker
d7160aea2d
GCS_MAVLink: handle DO_SET_MISSION_CURRENT as both long and int
2023-11-16 10:50:21 +11:00
Peter Barker
b572fe80ec
GCS_MAVLink: handle request autopilot capabilities as both long and int
2023-11-16 10:50:21 +11:00
Nick Exton
0567d8576e
GCS_MAVLink: Add explicit handling of DO_JUMP_TAG
2023-11-14 10:22:45 +11:00
Peter Barker
abf32906d2
GCS_MAVLink: support gripper commands as both long and int
2023-11-08 18:15:25 +11:00
Peter Barker
09ab14c69f
GCS_MAVLink: handle battery reset as both long and int
2023-11-08 18:14:27 +11:00
Peter Barker
1d08900cb0
GCS_MAVLink: handle MAV_CMD_DO_SPRAYER as both long and int
2023-11-07 10:55:46 +11:00
Peter Barker
187ae07225
GCS_MAVLink: handle camera messages as COMMAND_INT as well as COMMAND_LONG
2023-11-02 15:54:13 +11:00
Peter Barker
e162e74c0c
GCS_MAVLink: allow MAV_CMD_RUN_PREARMS as both long and int
2023-11-01 19:30:44 +11:00
Peter Barker
78475cad5c
GCS_MAVLink: handle FLASH_BOOTLOADER as command-long and command-int
2023-10-31 11:32:32 +11:00
Peter Barker
afd85c8613
GCS_MAVLink: handle MAV_CMD_START_RX_PAIR as both int and long
2023-10-31 11:18:57 +11:00
Peter Barker
2ac9cc94c6
GCS_MAVLink: correct compilation if rangefinder disabled
2023-10-27 14:16:47 +11:00
Peter Barker
2412ba495d
GCS_MAVLink: remove handling of PREFLIGHT_SET_SENSOR_OFFSETS
...
This was the old offboard-calibration code.
We've checked MAVProxy, QGC and MissionPlanner and they're not using this code.
The onboard calibration stuff is better.
2023-10-26 13:19:59 +11:00
Peter Barker
740b939aa5
GCS_MAVLink: handle control-high-latency as both long and int
2023-10-26 13:19:29 +11:00
Peter Barker
21eaa08333
GCS_MAVLink: handle MAV_CMD_NAV_TAKEOFF via command_long and command_in
2023-10-24 12:59:19 +11:00
Peter Barker
0b04f765d4
GCS_MAVLink: factor out a virtual mav_frame_for_command_long method
2023-10-24 12:59:19 +11:00
Peter Barker
25846eb2bc
GCS_MAVLink: handld MAV_CMD_DO_FENCE_ENABLE as both long and int
2023-10-24 11:37:18 +11:00
Peter Barker
37b02725b3
GCS_MAVLink: handle MAV_CMD_DO_SEND_BANNER as both long and int
2023-10-18 19:49:17 +11:00
Peter Barker
e71227fe3a
GCS_MAVLink: handle MAV_CMD_GET_HOME_POSITION as both long and int
2023-10-18 19:48:23 +11:00
Peter Barker
7713b531a0
GCS_MAVLink: allow setting modes via COMMAND_INT and DO_SET_MODE
2023-10-17 10:41:36 +11:00
Peter Barker
90d39a6ee0
GCS_MAVLink: add build option for deprecated MISSION_REQUEST
...
replaced by MISSION_REQUEST_INT
2023-10-17 10:40:12 +11:00
Peter Barker
1ece48b2b3
GCS_MAVLink: handle MAV_CMD_DEBUG_TRAP as both long and int
2023-10-17 10:25:45 +11:00
Peter Barker
659db36efe
GCS_MAVLink: accept accel cal vehicle positions as both int and long
2023-10-12 20:39:32 +11:00
Peter Barker
ce1bb64686
GCS_MAVLink: handle EKF_SOURCE_SET as both long and int
2023-10-11 18:37:02 +11:00
Peter Barker
57c2f7b2de
GCS_MAVLink: handle DO_AUX_FUNCTION as both long and int
2023-10-04 19:01:22 +11:00
Peter Barker
423a88f9cd
GCS_MAVLink: handle message interval commands as both long and int
2023-10-03 10:12:21 +09:00
Peter Barker
ef8cd449ec
GCS_MAVLink: handle MAV_CMD_DO_FLIGHTTERMINATION as both long and int
2023-09-27 11:27:45 -07:00
Peter Barker
0f6bf8994f
GCS_MAVLink: handle MAV_CMD_AIRFRAME_CONFIGURATION as both LONG and INT
2023-09-26 11:37:42 +10:00
Peter Barker
b44682d1a6
GCS_MAVLink: handle CAN_FORWARD as both command_INT and COMMAND_LONG
2023-09-20 17:50:56 +10:00
Peter Barker
5b0393e280
GCS_MAVLink: handle MAV_CMD_PREFLIGHT_REBOOT_SHUTDOWN as INT or LONG
2023-09-19 11:16:10 +10:00