rmackay9
c7480f2281
ArduCopter - fix to dataflash logging of Mag heading
2012-03-11 01:27:29 +09:00
Andrew Tridgell
ba8e764349
SITL: lower the noise and drift levels for general autotest usage
2012-03-10 10:34:34 +11:00
Andrew Tridgell
b02ca58901
InertialSensor: fixed HIL build
2012-03-10 10:34:34 +11:00
Andrew Tridgell
44ebb20329
MAVLink: bring the v1.0 MAVLink in sync with 0.9
2012-03-10 10:34:34 +11:00
Andrew Tridgell
87c463bcc7
DCM: after some experimentation, raise the ki values a bit
...
this tracks the max gyro drift more accurately
2012-03-10 10:34:34 +11:00
Andrew Tridgell
eff6778515
Quaternion: use gyro drift value from sensor driver
2012-03-10 10:34:34 +11:00
Andrew Tridgell
3989fe2c2c
Quaternion: go back to the full update_MARG()
...
the separate drift controller is too erratic on yaw hold to be usable
at the moment
2012-03-10 10:34:34 +11:00
Andrew Tridgell
c8189c80d4
SITL: cleanup the gyro drift calculations
...
use units that are more easily understood
2012-03-10 10:34:34 +11:00
Andrew Tridgell
b833190abb
Quaternion: make the quaternion test more generic
...
works with DCM too
2012-03-10 10:34:33 +11:00
Andrew Tridgell
2f9af05cfa
Quaternion: update to get_gyro_drift() interface
2012-03-10 10:34:33 +11:00
Andrew Tridgell
bf16b2926c
Quaternion: removed some unused variables
2012-03-10 10:34:33 +11:00
Andrew Tridgell
d75e883fe8
GCS: get_integrator() is now get_gyro_drift() in DCM
2012-03-10 10:34:33 +11:00
Andrew Tridgell
3b2609c441
DCM: separate out the omega_yaw_P from omega_P
...
this cleans up the separation of drift rates and proportional
correction from yaw source and accelerometers, allow the yaw
to run at a different rate to the accel correction
2012-03-10 10:34:33 +11:00
Andrew Tridgell
bcb7196680
IMU: added get_gyro_drift_rate() interface
...
this just calls down to the InertialSensor layer
2012-03-10 10:34:33 +11:00
Andrew Tridgell
9296ac494d
AP_InertialSensor: added a get_gyro_drift_rate() interface
...
this returns the expected max drift rate for the particular type of
gyro being used
2012-03-10 10:34:33 +11:00
Andrew Tridgell
882fa1818b
DCM: removed the limit on linear acceleration
...
we get linear accelerations of more than 1g when turning corners
2012-03-10 10:34:33 +11:00
Andrew Tridgell
9a06d35772
make 'ENABLE' and 'ENABLED' mean the same things
...
users get this wrong far too often!
2012-03-10 10:34:33 +11:00
Andrew Tridgell
801a442ffb
Quaternion: minor tuning
2012-03-10 10:34:33 +11:00
Andrew Tridgell
3344869285
DCM: minor tuning based on testing my quad
2012-03-10 10:34:33 +11:00
Andrew Tridgell
dffb435aac
SITL: make the yaw match the APM conventions
2012-03-10 10:34:33 +11:00
Andrew Tridgell
2673614f6d
SITL: fixed the pwm output on startup
2012-03-10 10:34:33 +11:00
Andrew Tridgell
982712d58f
Quaternion: code cleanups and added comments
2012-03-10 10:34:32 +11:00
Andrew Tridgell
f405477875
DCM: code cleanup and added more comments
2012-03-10 10:34:32 +11:00
Andrew Tridgell
9dc08b30cd
Quaternion: bumb up gyro drift limit to match DCM
2012-03-10 10:34:32 +11:00
Andrew Tridgell
828ad7625b
ACM: removed the ADC filtering code
2012-03-10 10:34:32 +11:00
Andrew Tridgell
f9394f8068
ADC: removed the ADC level accel smoothing
...
the quaternion code does a better job of handling this noise than this
filter does
2012-03-10 10:34:32 +11:00
Andrew Tridgell
8b40c44522
Quaternion: separate out drift correction from main updates
2012-03-10 10:34:32 +11:00
Andrew Tridgell
3e960f8ef9
InertionSensor: update for new Ch6() interface
2012-03-10 10:34:32 +11:00
Andrew Tridgell
919874f2a0
IMU: fixed a warning
2012-03-10 10:34:32 +11:00
Andrew Tridgell
4dff78b9c0
GPS: expose last_fix_time
2012-03-10 10:34:32 +11:00
Andrew Tridgell
6eff9107ea
Compass: change last_update to be in microseconds
2012-03-10 10:34:32 +11:00
Andrew Tridgell
a0a360f955
ADC: use floats for ADC averaging
...
this costs almost nothing and improved accel/gyro calibration
2012-03-10 10:34:32 +11:00
Andrew Tridgell
13d5839778
APM: removed quaternion special cases
2012-03-10 10:34:32 +11:00
Andrew Tridgell
371677610d
APM: avoid fetching the DCM matrix twice
...
also no special case for quaternions
2012-03-10 10:34:32 +11:00
Andrew Tridgell
1016d3c95d
ACM: removed quaternion special cases in CLI code
2012-03-10 10:34:31 +11:00
Andrew Tridgell
8393c0299b
ACM: removed the DCM tuning overrides
...
not needed now that DCM scales with deltat
2012-03-10 10:34:31 +11:00
Andrew Tridgell
7291dfc25a
ACM: removed the special case for quaternions in GCS code
2012-03-10 10:34:31 +11:00
Andrew Tridgell
d6cfc51ae4
ACM: no need to fetch offsets at startup
...
AP_Param handles this
2012-03-10 10:34:31 +11:00
Andrew Tridgell
ef771fecdc
ACM: removed a lot of the special case code for quaternions
2012-03-10 10:34:31 +11:00
Andrew Tridgell
69c29d35ce
ACM: change DCM loop to 100Hz
...
On my APM2 quad this seems to give better results
2012-03-10 10:34:31 +11:00
Andrew Tridgell
045b49c4c4
DCM: removed update_DCM_fast
...
this combines the functionality of the 'fast' DCM with the normal one,
and also speeds up both the yaw drift correction and the matrix update
code
2012-03-10 10:34:31 +11:00
Andrew Tridgell
321200ebbc
AP_IMU: fixed led flashing in gyro cal
...
thanks Pat!
2012-03-10 10:34:31 +11:00
Andrew Tridgell
a92fb67b70
AP_Math: expanded the math test suite
2012-03-10 10:34:31 +11:00
Andrew Tridgell
4d65cda0ea
AP_Math: added quaternion->matrix and earth frame routines
...
this will be used for 3d acceleration
2012-03-10 10:34:31 +11:00
Andrew Tridgell
8abbbe5713
AP_Math: better way of handling safe_sqrt()
...
better to test the result, than predict it
2012-03-10 10:34:31 +11:00
Andrew Tridgell
ccada2e9c2
SITL: avoid parent pid code on cygwin
...
this causes problems on windows
2012-03-10 10:34:31 +11:00
Andrew Tridgell
3666476bcb
SITL: prevent nested timer interrupts
2012-03-10 10:34:31 +11:00
Andrew Tridgell
3b7d78cf02
Quat: test patch for michael
2012-03-10 10:34:31 +11:00
Andrew Tridgell
f363f81869
Quaternion: added NaN paranoid checking
...
this is for Michael to run
2012-03-10 10:34:30 +11:00
Andrew Tridgell
2596acc8eb
ACM: removed incorrect mode definition
2012-03-10 10:34:30 +11:00