Commit Graph

84 Commits

Author SHA1 Message Date
priseborough bc3c85be20 AP_L1_Control : Fix potential divide by zero error 2014-08-07 19:04:42 +10:00
Andrew Tridgell 5a1aa8dfe7 AP_L1_Control: implement turn_distance() with turn angle
uses a linear approximation for now.
2014-06-05 09:34:23 +10:00
Andrew Tridgell aba11a0634 AP_L1_Control: wrap the target_bearing 2014-05-23 07:30:58 +10:00
Andrew Tridgell b9128a932f AP_L1_Control: no need to project position for lag
now handled by AHRS
2014-02-15 05:29:47 +11:00
Andrew Tridgell cfad814bfb AP_L1_Control: fixed switchover from loiter capture to circling
Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
2013-11-09 15:52:11 +11:00
Paul Riseborough 49fe7fea07 L1_Control : Added hysteresis for rear WP capture 2013-11-09 15:40:14 +11:00
Andrew Tridgell 1393ed58d0 AP_L1_Control: fixed waypoint approach logic
this could cause the RTL approach to not break off onto the circle
correctly
2013-11-09 12:54:26 +11:00
Andrew Tridgell ea9a2eda3f AP_L1_Control: reduced demanded bank angle by cos(pitch)
this prevents attempts to do too tight turns while at a steep pitch

Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
2013-11-04 21:21:42 +11:00
Andrew Tridgell 341dca4dfe AP_L1_Control: added set_default_period()
used by the rover code
2013-09-09 19:55:53 +10:00
Andrew Tridgell 144516c941 AP_L1_Control: set min groundspeed to 0.1
this works better for slow rovers
2013-08-14 14:57:23 +10:00
Andrew Tridgell 31fce44063 AP_L1_Control: use a reference to AHRS
makes code a bit simpler
2013-08-13 13:49:26 +10:00
Andrew Tridgell 08ec43ef89 AP_L1_Control: use get_position() 2013-08-13 12:07:35 +10:00
Andrew Tridgell b74ed795f2 AP_L1_Control: removed _maxf() and _geo2planar() functions
not needed any more
2013-08-13 12:07:35 +10:00
Andrew Tridgell 653fa5a191 AP_L1_Control: adjust position for GPS lag
this should help for rovers
2013-08-13 12:07:35 +10:00
Andrew Tridgell fd4bceaafe AP_L1_Control: avoid using float global coordinates
this increases the navigation precision of rovers using L1 control
down to the centimeter level
2013-08-13 12:07:35 +10:00
Andrew Tridgell df8e8c64e8 AP_L1_Control: use projected position for turns 2013-08-13 12:07:34 +10:00
Andrew Tridgell 9c88872ad0 AP_L1_Control: use a better ground speed estimate at low speeds
this should prevent a rover going in the wrong direction at the start
of a mission
2013-08-13 12:07:34 +10:00
Andrew Tridgell 953051b49e AP_L1_Control: added lateral acceleration interface
this will be used by the Rover code for steering
2013-08-12 13:38:38 +10:00
Andrew Tridgell cf4a74cfb8 AP_L1_Control: fix for new AP_Math API
Pair-Programmed-With: Brandon Jones <brnjones@gmail.com>
2013-08-05 10:24:02 +10:00
Paul Riseborough 0c64c800b3 AP_L1_Control : Fixed bug in track capture angle limit 2013-08-02 21:47:45 +10:00
Andrew Tridgell 097718e833 AP_L1_Control: scale loiter and wp radius with altitude
this should keep the aircraft stable in loiter at very high altitudes

Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
2013-07-22 12:50:01 +10:00
Andrew Tridgell 86db955ac9 AP_L1_Control: fixed indent-tabs-mode 2013-05-30 09:54:53 +10:00
Paul Riseborough 9f309a2aa6 AP_L1_Control: Remove potential nan errors
If WP A and B were the same or ground speed was exactly zero, then the
previous code would produce a nan output.  Protection against these
two cases has been added.

If WP A and B are equal, we track directly to the target waypoint
2013-05-13 11:27:51 +10:00
Andrew Tridgell 9654546b5a AP_L1_Control: Cleaned up calculation of damping to reduce computations
also removed _cross2D, using math library instead
2013-05-05 21:51:08 +10:00
Andrew Tridgell ba83950fc4 libraries: replace constrain() with constrain_float()
this makes the type much more obvious. Thanks to Tobias for the
suggestion.
2013-05-02 10:25:40 +10:00
Andrew Tridgell c067fa2660 L1_Control: make NAVL1_DAMPING docs clearer 2013-04-29 14:24:34 +10:00
priseborough 84ed37938d Plane : AP_L1_Control : Replaced division by constants with multiplies and adjusted default L1 period to 25 seconds 2013-04-28 14:47:59 +10:00
priseborough 9ff0888a17 AP_L1_Control : Fixed potential divide by zero in Nu1 angle calculation 2013-04-15 21:11:30 +10:00
Andrew Tridgell 97bfd16bd1 L1_Control: constrain the roll to handle floating point errors 2013-04-15 14:29:39 +10:00
Andrew Tridgell 571c48b9d5 L1_Control: cleanup some unused code and variables 2013-04-15 10:52:32 +10:00
priseborough a423d102e0 Plane : AP_L1_Control : Fix wrong way turn behaviour on loiter entry 2013-04-15 10:52:32 +10:00
Andrew Tridgell 181f7368a3 AP_L1_Control: change turn_distance() to be min of wp_radius and L1 distance
this gives less surprising behaviour for users
2013-04-15 10:52:32 +10:00
Andrew Tridgell dca597cda1 L1_Control: added a comment on speed of the L1 control code 2013-04-12 12:58:20 +10:00
Brandon Jones a3c2851120 AP_L1_Control: Addition of library for geometry calculations required for L1 Control.
1) Explicit control of tracking loop period and damping which removes previous
   variation in period with speed and fixed damping ratio
2) Explicit control of track capture angle (now set to 45 degrees by default)
3) Removal of restriction on loiter radius being greater than L1 distance

The circle(loiter) control is a L1 and PD hybrid utilising L1 for waypoint capture and PD control for circle tracking.

Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
Pair-Programmed-With: Andrew Tridgell <tridge@samba.org>
2013-04-12 12:48:09 +10:00