6ea5c21f7c
AP_ADC: added num_samples_available to allow main loop to be synced with arrival of new sensor data for Oilpan.
2012-09-10 11:37:43 +09:00
44941072dc
uncrustify libraries/AP_ADC/AP_ADC_ADS7844.h
2012-08-21 18:59:13 -07:00
f9394f8068
ADC: removed the ADC level accel smoothing
...
the quaternion code does a better job of handling this noise than this
filter does
2012-03-10 10:34:32 +11:00
a0a360f955
ADC: use floats for ADC averaging
...
this costs almost nothing and improved accel/gyro calibration
2012-03-10 10:34:32 +11:00
c80ec9a55c
AP_ADC: added new_data_available() interface
...
returns true if more samples are available
2012-03-10 10:34:28 +11:00
8780a60234
ADC: update for new ap_proceduce prototype
2011-12-21 23:31:38 +11:00
d442bad413
Revert "ADC: added an enable_channel() API"
...
This reverts commit dafeac01d8f14162600cf821404ba4072dcae14d.
ADC will be disabled on APM2
2011-12-17 07:29:09 +11:00
9591317dbc
ADC: added an enable_channel() API
...
enable_channel() must be used before the Ch6() method is called to
enable gathering of data on the required channels
2011-12-16 20:09:40 +11:00
f125f6619a
fixed formatting of ADC driver
...
it was a nasty mix of DOS and UNIX
2011-12-16 20:09:29 +11:00
5d503fd65e
ADC: change adc.Ch() to return a float
...
this gives us a bit more precision in airspeed measurement, and costs
us virtually nothing as we are converting to float immediately after
getting the value
2011-12-12 15:14:55 +11:00
017f121566
AP_ADC: rework ADC library to use PeriodicProcess and ISR_Register
...
this makes it possible to build the ADC library when another driver
may also want that interrupt
2011-11-25 20:00:16 -08:00
0bfa67f413
Heavy Accel Filter + mild Gyro Filter. To use, filter_result must be set to true on ADC. Off by default.
2011-10-01 15:44:53 -07:00
f89da12387
Minimized the accel_filtered vector to be faster and more accurate.
...
Made the Filter include the Accels and moved from 8 to 4 terms in the filter
2011-09-30 18:40:29 -07:00
de61e87128
Added ADC gyro Filtering for quads - this fixes a noise issue introduced into the controller
...
added Position mode
removed
Added back in the accelerometer experiment
Added filter_result boolean to enable filter on the fly
2011-09-29 23:27:23 -07:00
f375258699
fixed inconsistent linefeeds in ADC code
...
the linefeeds had bacome inconsistent in this library, making some
editors fail to load the code
2011-09-19 11:04:02 +10:00
9af7021a98
change ADC sample rate to 1kHz
...
this costs us about 9% of our CPU, but should make aliasing much less
of a problem.
2011-09-17 14:58:02 +10:00
70bf945d40
ADC: re-work for ADC code for full resolution and accurate timing
...
this changes the ADC code to return the full resolution of the
sensors. It also adds a new Ch6() interface that returns 6 channels at
once, so the IMU can read 3 accelerometers and 3 gyros at once, and
get the exact time that the values were accumulated over
2011-09-17 14:58:02 +10:00
ecd14f4425
Cleaned up guided mode
...
Reduced ADC filter to 3 from 6 to increase speed of filter.
2011-09-12 12:57:36 -07:00
eb39d2d53a
Added ability to grab an unfiltered value from the ADC
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2963 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-30 20:33:45 +00:00
c1ddd58d4c
Implemented moving average filter to deal with noise issues on quads, default is a 6 member filter.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2551 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-12 23:50:15 +00:00
cce122d387
Moved APM_ADC to AP_ADC
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@954 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-11-27 05:36:19 +00:00
rmackay9
uncrustify
Andrew Tridgell
Pat Hickey
Jason Short
jasonshort
james.goppert