Commit Graph

32097 Commits

Author SHA1 Message Date
Andy Piper
cd0d30d69c AP_HAL_ChibiOS: remove bdshot from speedybeef4 as it doesn't work and increases flash usage 2023-07-04 12:17:52 +09:00
Andy Piper
2b9395a42d AP_HAL_ChibiOS: Pixhawk1-bdshot 2023-07-04 12:17:52 +09:00
Michael du Breuil
0a959508f7 AP_ADSB: Fix spam of lost transciever message at update() rate 2023-07-04 12:17:51 +09:00
Andy Piper
2d57407b02 AC_AutoTune: correct incorrect min raw rate valuee 2023-07-04 12:17:51 +09:00
Andrew Tridgell
e2dd996da1 AP_NavEKF3: fixed velocity reset on AID_NONE
The ResetVelocity() function is only supposed to reset XY states, not
Z state. Resetting the Z state for velocity results in a large
velocity glitch if a vehicle is descending or ascending when aiding
switches to AID_NONE

this fixes #19386
2023-07-04 12:17:51 +09:00
Andrew Tridgell
3dd9513a03 AP_NavEKF2: fixed velocity reset on AID_NONE
The ResetVelocity() function is only supposed to reset XY states, not
Z state. Resetting the Z state for velocity results in a large
velocity glitch if a vehicle is descending or ascending when aiding
switches to AID_NONE

this fixes #19386
2023-07-04 12:17:51 +09:00
Peter Barker
6b384ace77 AP_Arming: reword GPS pre-arm failure
M10S (no storage) throws this for a considerable period of time and the wording makes this process sound scary.
2023-07-04 12:17:51 +09:00
Andy Piper
18f5051005 AP_HAL_ChibiOS: Pixhawk6X bdshot version 2023-07-04 12:17:51 +09:00
jfbblue0922
36dbba0068 AP_HAL_ChibiOS: jfb100 gets shorter EXT_WDOG_INTERVAL_MS 2023-07-04 12:17:51 +09:00
jfbblue0922
95ea5b3b92 AP_HAL_CHibiOS: JFB100 hwdef fix for ext watchdog 2023-07-04 12:17:51 +09:00
jfbblue0922
4b31fe20df AP_HAL_ChibiOS: support external watchdog gpio
Co-authored-by: Randy Mackay <rmackay9@yahoo.com>

optional support to toggle GPIO pin at 10hz
2023-07-04 12:17:51 +09:00
Andrew Tridgell
7b2e103ec3 AP_GPS: fixed ublox M10S auto-config
this copes with the M10S rejecting multiple-key VALGET calls. We fall
back to fetching one at a time
2023-07-04 12:17:51 +09:00
Alexander Keller
5d22115787 AP_GPS:Comform to ardupilot undulation definition 2023-07-04 12:17:51 +09:00
davidsastresas
0fa4e7cc1f GCS_Common: handle CMD_DO_SET_ROI_NONE for command int packets 2023-07-04 12:17:51 +09:00
Randy Mackay
f2157b3d87 AP_SerialManager: improve OPTIONS desc for Swap bit 2023-07-04 12:17:51 +09:00
Randy Mackay
ac28d560dd AP_SerialManager: generalise SToRM32 serial protocol desc and enum 2023-07-04 12:17:51 +09:00
Iampete1
9c6f57fb05 AP_Motors: Heli RSC: remove incorrect set range call 2023-07-04 12:17:51 +09:00
Henry Wurzburg
22d3146f38 AP_HAL_ChibiOS: add Holybro KakuteH7-Wing 2023-07-04 12:17:51 +09:00
Randy Mackay
9124c45ca9 AR_PosControl: add input_pos_vel_accel target 2023-06-08 10:05:36 +09:00
Randy Mackay
189e3634f1 AP_HAL_ChibiOS: JFB100 LED definition fix 2023-06-08 10:05:36 +09:00
Randy Mackay
26ee1f1df6 AP_InertialSensor: SCHA63T comment fix 2023-06-08 10:05:36 +09:00
Randy Mackay
348bf59bd0 AP_HAL_ChibiOS: JFB100 board def fixup 2023-06-08 10:05:36 +09:00
Randy Mackay
21a6e48f99 AP_InertialSensor: SCHA63T loses unused ret bool 2023-06-08 10:05:36 +09:00
jfbblue0922
e9bda3a311 AP_HAL_ChibiOS: add JFB100 board definition 2023-06-08 10:05:36 +09:00
Randy Mackay
4637156e6c AP_InertialSensor: formatting fixes 2023-06-08 10:05:36 +09:00
jfbblue0922
a908341b6c AP_InertialSensor: add SCHA63T IMU support 2023-06-08 10:05:36 +09:00
jfbblue0922
123b8113e8 AP_Math: add crc8_sae 2023-06-08 10:05:36 +09:00
Henry Wurzburg
c6eaee053c AP_Notify: fix incorrect buzzer pin type to stop always instantiating 2023-06-08 10:05:36 +09:00
James O'Shannessy
98560d9a17 AP_BattMonitor: Fixes the setting of a default parameter for battery instance #2 set in hwdef 2023-06-08 10:05:36 +09:00
Randy Mackay
4959ec9100 AC_WPNav: wpnav speed param check fixed 2023-06-08 10:05:36 +09:00
Andrew Tridgell
e2535a3851 HAL_ChibiOS: fixed USB pass-thru for 2nd USB endpoint
we need to align the endpoint ID in the structure
2023-06-08 10:05:36 +09:00
Andrew Tridgell
4f0a573c73 AP_AHRS: don't reject airspeed using EKF if dead-reckoning
when dead-reckoning the EKF wind estimate can diverge from reality,
leading to us rejecting a valid airspeed sensor. We are best off
trusting airspeed if we are dead-reckoning
2023-06-08 10:05:36 +09:00
Andrew Tridgell
303dad5ab6 AP_BoardConfig: fixed documentation of safety options
on and off were reversed
2023-06-08 10:05:36 +09:00
Iampete1
d00d5e09aa Filter: SlewLimiter: always caculate slew limit 2023-06-08 10:05:36 +09:00
Andrew Tridgell
f0bf42706d AP_BattMonitor: allow max amps to be configured on INA2XX
this allows for higer current ranges with lower resolution
2023-06-08 10:05:36 +09:00
Andrew Tridgell
73a904a0ec hwdef: use zero address for INA2XX to allow for different sensors 2023-06-08 10:05:36 +09:00
Andrew Tridgell
ee75016a12 AP_BattMonitor: auto-probe INA2XX address if address is zero
this makes life easier for users who don't know which device they have
2023-06-08 10:05:36 +09:00
Andrew Tridgell
abf4ba725a AP_BattMonitor: support INA228 and INA238 battery monitor
I2C monitors with similar functionality to INA226
2023-06-08 10:05:36 +09:00
Andy Piper
25f0860866 AC_AutoTune: load test gains for correct axis when testing yaw D 2023-06-08 10:05:36 +09:00
Paul Riseborough
880cffed9a AP_NavEKF3: Increase delta velocity bias state process noise
Required due to state variance collapse on ground with some systems using RTK GPS.
2023-06-08 10:05:36 +09:00
Paul Riseborough
365e3aa62a AP_NavEKF3: Strengthen recovery from bad delta velocity bias learning 2023-06-08 10:05:36 +09:00
Paul Riseborough
acfa1f108a AP_NavEKF3: Increase default value of EK3_ABIAS_P_NSE
This is required because some hardware setups with RTK GPS have experienced a collapse of the delta velocity state variances.
2023-06-08 10:05:36 +09:00
Paul Riseborough
954a3cf1e2 AP_NavEKF3: Retune and fix delta velocity bias state variance protection 2023-06-08 10:05:36 +09:00
Andy Piper
7ac3209c93 AP_NavEKF: ensure gyro biases are numbers
avoid errors during compass mot
2023-06-08 10:05:36 +09:00
Paul Riseborough
565c65803a AP_NavEKF3: Lock in wind state estimates when using srag to dead reckon 2023-06-08 10:05:36 +09:00
Andrew Tridgell
78e6ff53b4 AP_ICEngine: fixed a bug engine control when running
if you have a mission item for engine control with delayed start at
height and the engine is already running them it would put the ICE
subsystem into a state where it would no longer start the engine

It was actually 2 bugs:

 - an engine control to do a height delayed start should be ignored if
   the engine is already running. This prevents an engine control to
   start the engine from stopping the engine

 - a start_chan high should always try to start the engine
   immediately, even if in the wait state
2023-06-08 10:05:36 +09:00
Andrew Tridgell
18128ce3ad AP_RCProtocol: return true on initial protocol detection
we need to tell the IO firmware that a byte was consumed when we first
detect a protocol as otherwise the next bad byte on DSM will lock us
on the DSM port
2023-06-08 10:05:35 +09:00
Andrew Tridgell
c98b85a1a2 AP_IOMCU: fixed issue with not regaining RC input
this fixes an issue where when you lose R/C input on IOMCU that you
may not regain it when R/C comes back.

The issue stems from us still processing the DSM uart when we are
using the SD3 "SBUS" uart for RC input, and still doing the switch of
the SD3 config every 2 seconds.

When we are not searching for a new protocol we should not be changing
UART config
2023-06-08 10:05:35 +09:00
Andrew Tridgell
22a904f102 AP_NavEKF3: handle core setup failure
ensure num_cores is left as zero so that calls such as Log_Write don't
de-reference nullptr
2023-06-08 10:05:35 +09:00
Andrew Tridgell
d7c90c5a5b AP_NavEKF2: handle core setup failure
ensure num_cores is left as zero so that calls such as Log_Write don't
de-reference nullptr
2023-06-08 10:05:35 +09:00