Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
14,751 Commits 71 Branches 509 Tags 716 MiB
Commit Graph

97 Commits

Author SHA1 Message Date
Jonathan Challinger 6eab698e85 AC_WPNav: remove various timing hacks 2014-12-31 14:03:20 +09:00
priseborough 11fb51ceba AC_WPNav: Add nav velocity gain scaler to interfaces 
Allows gains to be adjusted to compensate for optical flow noise
 2014-12-06 18:16:50 +11:00
priseborough 5fa0c59310 AC_WPNav: Add EKF ground speed limit to loiter speed control 
This is required to prevent the speed controller saturating the optical flow sensor during low altitude flying.
 2014-12-06 18:16:50 +11:00
Jonathan Challinger 2cc65dffe0 AC_WPNav: add set_spline_dest_and_vel function 2014-11-17 14:38:46 -08:00
Jonathan Challinger 369839c7ca AC_WPNav: Use target yaw instead of current yaw for close waypoints 2014-10-31 15:23:52 +09:00
Randy Mackay dbe1c55666 AC_WPNav: add shift_wp_origin_to_current_pos for takeoff 
This shifts the origin to the vehicle's current position and should be
called just before take-off to ensure there are no sudden roll or pitch
moves on takeoff.
 2014-09-29 15:26:18 +09:00
Randy Mackay 765420ee04 AC_WPNav: add loiter_soften_for_landing method 
This resets the position target to the current location.
 2014-09-19 16:43:10 +09:00
Randy Mackay 2b64c511ed AC_WPNav: update yaw only when track is at least 2m 2014-07-06 17:02:12 +09:00
Randy Mackay a2f54fdf2c AC_WPNav: smooth waypoint by freezing feed-forward and allowing overshoot 
First part of this fix is freezing the position controller's xy-axis
feed foward as we transition to the new segment.
Second part is work-around for straight line segments in that we allow
the target point to actually overshoot the end of the segment by up to
2m if the segment is a "fast waypoint".  Ideally we would instead notice
the waypoint has been completed and take any left over time or distance
and move our target along the track towards the next waypoint but that
would require a much larger change to allow the wpnav lib to hold the
next two waypoints.
 2014-06-10 20:03:01 +09:00
Randy Mackay efd6d6dc70 AC_WPNav: spline div by zero fix 
Also add check for straight line navigation to ensure speed is not
reduced below zero when it hits the leash limit
Also minor formatting changes
 2014-06-05 22:23:38 +09:00
lthall 0912bec8f5 Spline div zero and leash limit fix 2014-06-05 22:23:35 +09:00
Randy Mackay 597d5227f5 AC_WPNav: rename set_loiter_target to init_loiter_target 2014-05-19 12:27:25 +09:00
Randy Mackay 5d20594fa4 AC_WPNav: bug fix for loiter and waypoint update rate 
Thanks to EmileC for spotting this
 2014-05-12 20:13:46 +09:00
lthall 9ab9eaec25 AC_WPNav: Loiter jerk default to 10m/s/s/s 
Pair programmed with Randy
 2014-05-08 16:16:05 +09:00
Randy Mackay 091ff91a70 WPNav: add wp_and_spline_init to set speeds an init pos controller 2014-05-08 16:15:50 +09:00
Randy Mackay 48ec0caf75 AC_WPNav: run navigation at 10hz in SITL 2014-05-08 16:15:44 +09:00
lthall b38c484874 AC_WPNav: add LOIT_JERK parameter 
Limit accel output from loiter controller.
Call new pos_control.init_xy_controller when loiter starts
Remove sudden stop when pilot requested acceleration is zero

Pair programmed with Randy
 2014-05-08 16:15:38 +09:00
Randy Mackay fd9f8f571f AC_WPNav: replace inav, ahrs pointers with references 2014-05-08 16:15:26 +09:00
Randy Mackay 0103ae2eb0 AC_WPNav: add WPNAV_ACCEL_Z 
Allows configurable z-axis acceleration during missions
 2014-04-30 21:46:12 +09:00
Randy Mackay 510c9920a6 AC_WPNav: rename get_horizontal_velocity to get_speed_xy 
This new method name is consistent with the equivalent in the
AC_PosControl class
 2014-04-30 21:46:06 +09:00
Randy Mackay db51d37071 AC_WPNav: add clear_pilot_desired_acceleration 
This allows quickly clearing out the pilot desired acceleration for
loiter contoller.
 2014-04-25 14:45:14 +09:00
Randy Mackay ad99918fee AC_WPNav: recalc leash lengths if set_horizontal_velocity is called 
Resolves bug in which do-set-speed allowed reducing the speed during the
mission but not increasing it.
Slow down distance is also recalculated.
Unnecessary call to calc_wp_leash_length removed from
set_spline_origin_and_destination.
 2014-04-24 13:16:08 +09:00
Randy Mackay 46fba47c8e AC_WPNav: slow target point's speed near destination 2014-04-24 13:16:00 +09:00
Randy Mackay 7c02a02bd8 AC_WPNav: reset_I flag moved to position controller 2014-04-23 15:00:14 +09:00
Randy Mackay 4d5b73b968 AC_WPNav: add reset_I to set_loiter_target 2014-04-23 15:00:07 +09:00
Ju1ien 5d0476e522 AC_WPNav: add reset_I to init_loiter_target 2014-04-23 14:59:47 +09:00
Randy Mackay 559a258ede AC_WPNav: bug fix to limit target point from moving beyond leash 
Also pull Z-axis acceleration from position controller instead of using
#define
 2014-04-22 23:05:11 +09:00
Randy Mackay 648787a6c8 AC_WPNav: rename some definitions 2014-04-21 15:06:29 +09:00
Randy Mackay 2167dd7d3e AC_WPNav: update target speed immediately 2014-04-21 14:51:26 +09:00
Randy Mackay d382fa51ee AC_WPNav: run loiter and wp nav at 50hz on Pixhawk 2014-04-21 13:32:02 +09:00
Randy Mackay b15d4379d8 AC_WPNav: use atan2f, make methods const 2014-03-30 23:09:51 +09:00
Randy Mackay 24eb195aa3 WPNav: add yaw control for straight line wp nav 2014-03-28 09:23:13 +09:00
Randy Mackay b42b12f7be AC_WPNav: add get_spline_yaw 2014-03-28 09:23:07 +09:00
Randy Mackay e5e71ce371 WPNav: add spline support 2014-03-28 09:22:53 +09:00
Randy Mackay e86a21a254 AC_WPNav: remove AC_PID include 
This is no longer required with introduction of PosControl lib
 2014-02-15 06:09:08 +11:00
Randy Mackay 9e31f0b985 AC_WPNav: use PosControl accessor 
Saves 2bytes of RAM
 2014-02-15 05:27:50 +11:00
Randy Mackay 64cfcb2308 AC_WPNav: use trig values from ahrs 2014-02-15 05:27:48 +11:00
Randy Mackay d4e4620159 AC_WPNav: remove unused PID references 2014-02-15 05:27:39 +11:00
Randy Mackay 1596d83d02 AC_WPNav: move leashes to AC_PosControl 2014-02-15 05:27:37 +11:00
Randy Mackay 0d4ba04e75 AC_WPNav: make advance_wp_target private 2014-02-15 05:27:37 +11:00
Randy Mackay 0c8cbba644 AC_WPNav: remove xy pos controller 2014-02-15 05:27:36 +11:00
Randy Mackay 2984e492df AC_WPNav: add reference to AC_PosControl 
Also remove requirement to pass in inertial nav position and velocity to
init_loiter method
 2014-02-15 05:27:35 +11:00
Randy Mackay c9415a08f1 AC_WPNav: use ahrs trig values 2014-02-08 18:16:47 +09:00
Randy Mackay 0a3559813a AC_WPNav: accessor for loiter speed 2014-01-15 15:22:30 +09:00
Andrew Tridgell 30fffa5854 AC_WPNav: fixed some build warnings 2013-12-11 10:21:41 +11:00
Tobias c3309d909c AC_WPNav: make more member pointers const 2013-10-27 13:41:29 +09:00
Tobias bb5cf4a311 AC_WPNav: make member pointer to AP_InertialNav object const since it's 
never modified
 2013-10-27 13:41:23 +09:00
Randy Mackay 45aeb1a921 Copter: split up loiter into 4 steps 
Reduces disruption to the main loop but also introduces a delay of 30ms
to navigation output
 2013-08-28 11:33:10 +09:00
Randy Mackay 6969ab573d Copter: configurable max lean angle 
ANGLE_MAX parameter allows limiting the roll and pitch angles during
manual and auto flight modes to anywhere from 10 to 80 degrees
 2013-08-11 12:53:22 +09:00
Randy Mackay 345924ddec WPNav: replace LOITER_ACCEL_MAX with parameter 
Also removed unused _lean_angle_max variable
 2013-07-10 20:00:32 +09:00