Randy Mackay
1590a5d58a
Copter: increase Yaw Rate I 0.02
2013-07-11 12:20:29 +09:00
Randy Mackay
ab1a7baf71
Copter: project stopping point for loiter command
2013-07-11 11:39:47 +09:00
Randy Mackay
bf5a50f738
WPNav: stopping point projection uses wp_leash
2013-07-11 11:39:44 +09:00
Kevin Hester
1c5ddc20ca
documentation: minor fix to px4 build instructions (tridge please check)
2013-07-11 12:37:44 +10:00
Andrew Tridgell
73928b82a6
Plane: fixed FBWB airspeed control
...
thanks to Gabor for reporting this!
2013-07-11 11:58:54 +10:00
Andrew Tridgell
1d04290eab
Plane: change to 2.74beta3
2013-07-11 11:58:54 +10:00
Randy Mackay
d77f7bc803
Copter: default Loiter Pos P to 0.8 (was 0.2)
2013-07-11 08:13:17 +09:00
Andrew Tridgell
11a4628409
Plane: added ACRO mode to mode choices
2013-07-11 09:10:41 +10:00
Andrew Tridgell
fc67f51901
Plane: added ACRO_ROLL_RATE and ACRO_PITCH_RATE parameters
...
default to 180 degrees/second, which seems reasonable
2013-07-11 09:10:41 +10:00
Andrew Tridgell
608007361b
Plane: added initial implementation of ACRO mode
...
rate based control with attitude locking
2013-07-11 09:10:41 +10:00
Andrew Tridgell
f2316747f5
APM_Control: re-work to allow for rate based control
2013-07-11 09:10:41 +10:00
Randy Mackay
ec65764750
Copter: typo in release notes
2013-07-11 08:04:45 +09:00
Randy Mackay
ab09dc46fb
Copter: update release notes
2013-07-10 21:20:01 +09:00
Randy Mackay
0ba6bf8721
AutoTest: relax stability patch max distance
2013-07-10 20:54:12 +09:00
Randy Mackay
345924ddec
WPNav: replace LOITER_ACCEL_MAX with parameter
...
Also removed unused _lean_angle_max variable
2013-07-10 20:00:32 +09:00
Randy Mackay
204f613467
WPNav: bug fix to reported distance to target
...
This value is for reporting purposes only
2013-07-10 18:21:08 +09:00
Randy Mackay
518eba0729
WPNav: bug fix to loiter accel calculation
...
Contribution from Leonard Hall
2013-07-10 17:52:12 +09:00
Randy Mackay
c4f17b3235
WPNav: rounding error fix in loiter
...
Contributed by Leonard Hall
2013-07-10 16:24:37 +09:00
Randy Mackay
8cb7bd628e
Copter: change firmware version to 3.0.1-rc2
2013-07-10 15:52:21 +09:00
Randy Mackay
5d23d5aaa7
WPNav: reduce loiter speed used to correct pos error
...
Contributed by Leonard Hall
This should reduce the aggressiveness of the response when we experience
a GPS glitch
2013-07-10 15:52:18 +09:00
Randy Mackay
f459d35e3e
Copter: roll-pitch fix to allow I to reduce
...
Contributed by Leonard Hall
2013-07-10 15:52:15 +09:00
Randy Mackay
7860d06b91
AHRS: typo fix for ORIENTATION param description
2013-07-10 14:56:48 +09:00
Andrew Tridgell
2005d5642a
Plane: fixed a documentation string
...
GND_ALT_OFFSET is now for barometric corrections
2013-07-10 14:46:22 +10:00
Andrew Tridgell
0f72401d8d
AP_Baro: added GND_ALT_OFFSET parameter
...
used for automatic barometric adjustment by a ground station equipped
with a barometer
2013-07-10 14:38:57 +10:00
Andrew Tridgell
3c97fad2ec
Plane: changes for GPS field changes
2013-07-10 14:04:22 +10:00
Andrew Tridgell
da4137b731
Copter: changes for GPS field changes
2013-07-10 14:04:22 +10:00
Andrew Tridgell
b5db3288ae
Rover: changes for GPS field changes
2013-07-10 14:04:22 +10:00
Andrew Tridgell
469736e6bc
DataFlash: changes for GPS field changes
2013-07-10 14:04:22 +10:00
Andrew Tridgell
279f6d00f0
AP_AHRS: changes for GPS field changes
2013-07-10 14:04:22 +10:00
Andrew Tridgell
7dbb898264
AP_GPS: switch fields to add units suffix
...
altitude -> altitude_cm
ground_speed -> ground_speed_cm
ground_course -> ground_course_cd
this helps prevent unit mixups
2013-07-10 14:04:22 +10:00
Andrew Tridgell
7aa360b176
Plane: added relative_altitude helper functions
...
prevents some code duplication
2013-07-10 14:04:22 +10:00
Paul Riseborough
66d60953df
TECS: added height update_pitch call
2013-07-10 14:04:22 +10:00
Paul Riseborough
971d36f06b
Plane: added height to 10Hz TECS call
2013-07-10 14:04:22 +10:00
Randy Mackay
cf6684ac0c
AutoTest: fix to copter getting stuck in Failsafe test
2013-07-10 13:03:40 +09:00
Andrew Tridgell
c544a076ca
Copter: enable camera logging by default
...
these messages only happen on user defined camera triggering, so
should be low rate
2013-07-10 12:24:02 +10:00
Andrew Tridgell
3c177867a4
Plane: allow enable/disable of camera log messages in CLI
2013-07-10 12:23:36 +10:00
Andrew Tridgell
f7c8d1e1ee
Plane: use current_loc.alt for altitude to TECS
2013-07-10 11:55:35 +10:00
Andrew Tridgell
9959f6b2df
AP_Camera: removed incorrect mavlink sends
...
these sends did nothing, as MAVLINK_COMM_3 is not connected to
anything. If it was connected they would be dangerous, as a blocking
serial write could cause the stabilization of a copter not to run. If
the serial port was non-blocking it would corrupt the packet.
If we needed something like this it would have to use the MAVLink
packet queueing logic we use elsewhere
2013-07-10 11:51:40 +10:00
Craig@3DR
7f4336430a
Plane: trigger picture + logging on camera update_location()
2013-07-10 08:40:01 +10:00
Craig@3DR
bbd4fbd2fb
Copter: trigger + logging on camera update_location()
2013-07-10 08:39:59 +10:00
Craig@3DR
f5154d9e7a
AP_Camera: changed update_location() to return true for camera trigger
...
Makes the main vehicle code responsible for taking a photo so logging can occur
2013-07-10 08:39:56 +10:00
Andrew Tridgell
7fa1fe8590
AP_Param: use 0xFFFF not __UINT16_MAX__
...
MacOS doesn't have __UINT16_MAX__
2013-07-09 20:51:06 +10:00
Paul Riseborough
a4f3180e2a
Plane: added support for throttle nudging with TECS
2013-07-09 20:51:03 +10:00
Paul Riseborough
2c5db9a165
TECS: added support for throttle nudging
2013-07-09 20:50:37 +10:00
Paul Riseborough
c34803db13
Plane: pass in adjusted height above field to TECS
2013-07-09 09:25:55 +10:00
Paul Riseborough
9c431b4a04
TECS: use altitude supplied by mainline code
...
this allows for use of ALT_OFFSET and ALT_MIX
2013-07-09 09:25:53 +10:00
Paul Riseborough
d8fedf994a
AP_SpdHgtControl: added height above field parameter
2013-07-09 09:05:22 +10:00
Andrew Tridgell
764d382aef
autotest: display map results on timeout
2013-07-09 08:48:17 +10:00
Andrew Tridgell
becd180441
autotest: external timeout must be greater than internal timeout
...
or we can get blank output
2013-07-08 21:52:24 +10:00
Tobias
4a75351bd3
AP_Param: fixed a compiler warning with -Wsign-conversion
2013-07-08 14:57:33 +10:00
