Commit Graph

3363 Commits

Author SHA1 Message Date
Jason Short 89343ae306 adjusted GPS watch dog not to be so aggressive,
removed unneeded flag clearing
2012-01-14 11:20:40 -08:00
Jason Short 95ac9d163e lowered Loiter I, commented out unused var 2012-01-14 11:20:40 -08:00
Jason Short c02b403a06 temp removed alt D term until more testing 2012-01-14 11:20:40 -08:00
Jason Short 1843798697 Clarified the Increment for WP total 2012-01-14 11:20:40 -08:00
Jason Short f97d58c753 added notes, removed redundant save wp_total 2012-01-14 11:20:40 -08:00
Andrew Tridgell 897d9a1c0b baro: fixed an integer overflow issue at high altitudes
the averaging array was using 16 bit numbers, but we are storing
numbers with 19 significant bits. That caused overflow at high
altitude, and some very interesting altitude graphs!

Thanks to Michael Oborne for spotting this in a log
2012-01-14 19:51:35 +11:00
Randy Mackay bcd63a9807 OpticalFlow - bug fix - highest resolution was incorrectly set as 1200 instead of 1600 2012-01-14 12:34:29 +09:00
Jason Short 7877a872d3 added update throttle cruise function 2012-01-13 16:48:05 -08:00
Jason Short 1269b07d9a Made RTL always the current Altitude 2012-01-13 16:47:38 -08:00
Jason Short ec9880f725 made resetting throttle cruise a function 2012-01-13 16:47:08 -08:00
Jason Short 6591089110 Disabled Ryans filter until we get real-world testing in. 2012-01-13 12:48:02 -08:00
Jason Short 8d909f6eed fixed GPS bug - moved to fast loop location 2012-01-13 12:47:22 -08:00
Jason Short c327a9f000 made landing shoot for below home by 2 meters to avoid bounce up. 2012-01-13 12:46:40 -08:00
Jason Short 7c475f178c tuned down Alt hold D gain 2012-01-13 09:36:51 -08:00
Michael Oborne b52ad60864 firmware build 2012-01-14 01:00:41 +08:00
Jason Short 4eacc6f3eb re-enabled relay test 2012-01-13 08:55:02 -08:00
Jason Short ee7c948781 Added simple constrain for Alt d term 2012-01-13 08:49:55 -08:00
Jason Short b0810e054e moved GPS routines to 50hz loop to avoid delay. 2012-01-12 22:59:47 -08:00
Jason Short 648a404ee1 Version 2.2 2012-01-12 22:37:33 -08:00
Jason Short 91e05834c8 removed wind comp code,
Added Landing boost code
2012-01-12 22:28:58 -08:00
Jason Short 4459fc4e34 Added a small D term on alt hold 2012-01-12 22:28:58 -08:00
Jason Short 6b85adb460 Added Landing throttle control to force down the copter 2012-01-12 22:28:58 -08:00
Jason Short 154411c96c removed unused defines
lowered default Loiter gain
2012-01-12 22:28:58 -08:00
Jason Short 569ff5046f Added Ryan's GPS lag filter
Removed unused code
refined alt change
2012-01-12 22:28:58 -08:00
Jason Short a59c9ae22c added notes 2012-01-12 22:28:58 -08:00
Andrew Tridgell 15d446bde2 DCM: prevent a segmentation fault when compass is not enabled
when compass is disabled _compass is NULL
2012-01-13 15:48:07 +11:00
Doug Weibel 9846822748 Bug fix for compass.
This is a fix for an interesting bug when a DCM matrix reset was added to the ground start.  This bug only showed up if (A) a ground start were performed after an air start or due to use of the "Calibrate Gryo" action, (B) if the current orientation were sufficiently different from 0/0/0, and (C.) if the particular magnetometer had sufficiently large offsets.  Why did resetting the DCM matrix to 0/0/0 pitch/roll/yaw at ground start cause a bug?  The magnetometer offset nulling determines the proper offsets for the magnetometer by comparing the observed change in the magnetic field vector with the expected change due to rotation as calculated from the rotation in the DCM matrix.  This comparison is made at 10Hz, and then filtered with a weight based on the amount of rotation to estimate the offsets. Normally it would take considerable time at normal in-flight rotation rates for the offset estimate to converge. 

If a DCM matrix reset occurs when the offset nulling algorithm is up and running, the algorithm sees the DCM reset as a instantaneous rotation, however the magnetic field vector did not change at all.  Under certain conditions the algorithm would interpret this as indicating that the offset(s) should be very large.  Since the "rotation" could also have been large the filter weighting would be large and it was possible for a large erroneous estimate of the offset(s) to be made based on this single (bad) data point.

To fix this bug methods were added to the compass object to start and stop the offset nulling algorithm.  Further, when the algorithm is started, it is set up to get fresh samples.  The DCM matrix reset method now calls these new methods to stop the offset nulling before resetting the matrix, and resume after the matrix has been reset.
2012-01-12 14:44:24 -07:00
analoguedevices 70b7951366 Eliminated second instance of APM2 #defines 2012-01-12 20:38:41 +00:00
Jason Short a7bce15365 R10 2012-01-11 22:41:51 -08:00
Jason Short 99ea69ef7b New Loiter control 2012-01-11 22:41:51 -08:00
Jason Short 257890d5be New Loiter Gains for new Loiter methods 2012-01-11 22:41:51 -08:00
Jason Short 98f637282b moved to verify_land 2012-01-11 22:41:51 -08:00
Jason Short 5e9db462f5 attempting to force down without using Manual boost. 2012-01-11 22:41:51 -08:00
Doug Weibel 892f24ac5c Adding comments for global variables 2012-01-11 12:37:43 -07:00
Michael Oborne 28d0377a00 APM Planner 1.1.20
add ac2 land Mode
add xplane 10 support
add disconnect verify
2012-01-12 01:33:42 +08:00
Andrew Tridgell 49cf409c23 desktop: floating point precision changes from Justin Beech 2012-01-11 21:31:59 +11:00
Jason Short f35411ac45 R9 2012-01-10 23:46:08 -08:00
Jason Short 84e001594d comma 2012-01-10 23:45:33 -08:00
Jason Short d11eaa9265 Tweaks 2012-01-10 23:43:44 -08:00
Jason Short e2830ca147 fixed type error 2012-01-10 23:43:44 -08:00
Jason Short 354d9588bf sensorSign swicth 2012-01-10 23:43:44 -08:00
Jason Short 4b54887c6c Switched to set_next_WP for mode switches 2012-01-10 23:43:44 -08:00
Jason Short 6b836d1a09 Fixed Type Error 2012-01-10 23:43:44 -08:00
Jason Short c4476bdd80 Fixed type error 2012-01-10 23:43:44 -08:00
Jason Short 3e8ff39d4b Climb rate control 2012-01-10 23:43:44 -08:00
Jason Short a79d302b98 added set_new_altitude call() 2012-01-10 23:43:44 -08:00
Jason Short e102cb9e6a Added ending for auto landing 2012-01-10 23:42:27 -08:00
Jason Short 3a5ffc252d updated climb rate control
Land detector
2012-01-10 23:42:27 -08:00
Jason Short acd877abda added set_new_altitude call 2012-01-10 23:42:27 -08:00
Jason Short f36aba8af2 climb rate control 2012-01-10 23:42:26 -08:00