Commit Graph

119 Commits

Author SHA1 Message Date
Andrew Tridgell 3f9bd65d2f APM: send airspeed sensor value, not estimate, when enabled
this solves the problem of people reporting that airspeed is not shown
when ARSPD_USE is zero.
2012-09-20 08:00:54 +10:00
Andrew Tridgell a84a08d2a4 APM: make it possible to fetch parameters by index 2012-09-20 07:42:46 +10:00
Andrew Tridgell e28ddb0f3d APM: much faster parameter fetching
allow up to 30% of bandwidth to be used for parameter send
2012-09-20 07:29:23 +10:00
Andrew Tridgell 73340a5e5d APM: fixed handling of DO_REPEAT_SERVO and DO_REPEAT_RELAY 2012-09-17 14:45:47 +10:00
Andrew Tridgell cf9dd9281c APM: ensure DO_SET_SERVO channels are enabled 2012-09-16 15:08:14 +10:00
Andrew Tridgell 1e51988ecc APM: allow update of last waypoint
fixed off by one error
2012-09-16 15:06:26 +10:00
Andrew Tridgell 4f504b0729 APM: show real raw RC input, not mixed input
this makes it easier to diagnose elevon mixing issues
2012-09-13 12:00:49 +10:00
Andrew Tridgell 29344e688d APM: reboot only works on the APM2 2012-09-10 11:50:48 +10:00
Andrew Tridgell d08bd4214b APM: added support for MAV_CMD_PREFLIGHT_REBOOT_SHUTDOWN
this allows for remote reboot of APM
2012-09-10 11:42:30 +10:00
Andrew Tridgell 57ac3f59f2 APM: fixed fetch of relative altitude waypoints
when we fetch relative altitude waypoints from APM to a file, we need
to preserve the altitude
2012-09-10 09:40:29 +10:00
Andrew Tridgell 63ca982f21 APM: tidy up an if() statement 2012-09-08 10:14:20 +10:00
Andrew Tridgell 9b2a2b2c2e APM: support DO_SET_SERVO command 2012-09-08 10:06:53 +10:00
Andrew Tridgell 880404d062 APM: added forwarding of unknown MAVLink types 2012-09-08 10:06:15 +10:00
Michael Oborne 35a8bf961c AP fix takeoff alt issue
issue 733
2012-09-06 20:19:12 +08:00
Andrew Tridgell 332ad921cc APM: added new TELEM_DELAY parameter
number of seconds to delay telemetry
2012-08-30 08:59:39 +10:00
Andrew Tridgell a6a583650c APM: report estimated airspeed if airspeed not available 2012-08-25 17:49:26 +10:00
Andrew Tridgell f1ba9c08e5 APM: support forcing MANUAL of FBWA mode over MAVLink 2012-08-24 15:18:22 +10:00
Andrew Tridgell 56ada1a69c APM: added RSSI to RC_CHANNELS_RAW as well
and prevent double read
2012-08-22 13:58:25 +10:00
Andrew Tridgell 279e942581 APM: added RSSI in raw message too 2012-08-22 13:48:09 +10:00
Andrew Tridgell e74dab122a APM: added RECEIVER_RSSI_PIN option
this allows for the receiver RSSI to be sent over MAVLink

Thanks to Burt Green for the suggestion
2012-08-22 13:33:12 +10:00
uncrustify 5e8e33f0d7 uncrustify ArduPlane/GCS_Mavlink.pde 2012-08-21 19:19:51 -07:00
rmackay9 b80a3943aa ArduCopter, ArduPilot: revert mavlink delay callback to be "unsigned long" 2012-08-18 20:34:41 +09:00
rmackay9 e5d8efdb7e ArduPlane: replaced many "int" with "int16_t", "long" with "int32_t" 2012-08-18 18:26:13 +09:00
rmackay9 e52e22bcab ArduPlane: commented out two unused variables to remove compiler warning 2012-08-18 13:20:34 +09:00
Andrew Tridgell 5ebcf425cf APM: allow telemetry send during parameter and waypoint fetch
this slows down telemetry by a factor of 4 during parameter or
waypoint transmit. That ensures that mode changes and gps position are
still updated during a long parameter fetch
2012-08-16 10:50:12 +10:00
Andrew Tridgell 0a7d8a4933 MAVLink: enable fetching of single parameters
this makes it possible for the GCS to fetch a single parameter by
name, which is useful for parameters that change in flight
2012-08-16 10:14:46 +10:00
Andrew Tridgell a1107602e9 APM: allow for separate calibration of airspeed/barometer
this is useful just before takeoff, to account for temperature changes
2012-08-15 19:49:09 +10:00
Andrew Tridgell 8c3b6f471f APM: keep the time of the last heartbeat message
this will be used for failsafe processing
2012-08-15 12:39:34 +10:00
Andrew Tridgell b54ab2d72a APM: expose change_command() and geofence_breached() to libraries
this makes a failsafe library easier
2012-08-15 12:39:34 +10:00
Andrew Tridgell 98d5a49717 APM: fixed LOITER_TIME and LOITER_TURNS
These now follow the mavlink spec. Loiter time is in seconds, and
loiter turns is now 32 bit angle, so can handle larger numbers of
turns.
2012-08-15 12:39:34 +10:00
Andrew Tridgell 3b9623a44c Mavlink: log wind estimation result 2012-08-11 22:06:03 +10:00
Andrew Tridgell 9d9c7b0455 APM: allow for navigation by dead-reckoning
we now ask AHRS if we have a position estimate, and use that if
available
2012-08-11 12:01:08 +10:00
Andrew Tridgell 9bdf204e35 APM: support the MISSION_WRITE_PARTIAL_LIST command
this allows missions to be partially updated in flight
2012-08-09 17:13:36 +10:00
Andrew Tridgell a7399c405d MAVLink: removed the need for Mavlink_compat.h
we have now fully transitioned to MAVLink 1.0, so we no longer need
the compatibility layer and the old names in the code
2012-08-09 12:22:46 +10:00
Andrew Tridgell 16d63978f1 MAVLink: moved mavlink variables back to library
these were moved to the main sketches to allow for compile time
selection of MAVLink 0.9 vs 1.0. We no longer support 0.9, so we can
move it back, which simplifies some test sketches
2012-08-09 12:06:21 +10:00
Andrew Tridgell 6e46db39a1 APM: Added STICK_MIXING option
this replaces the compile time option. Disabling during long distance
flights when the transmitter may be out of range is useful.
2012-08-09 08:53:29 +10:00
Andrew Tridgell 67f076a9db APM: change variables to use _cm, _cd and _ms suffix for units
this makes it less likely that we mix up units
2012-08-08 12:12:30 +10:00
Andrew Tridgell f98b887dbe AP_Param: update ArduPlane core for new AP_Param interface 2012-08-08 12:11:57 +10:00
Michael Oborne eeac211b1d AP Fix Hil Airspeed calc in m/s 2012-07-26 20:21:17 +08:00
Andrew Tridgell caa16cbb54 APM: fixed HIL build 2012-07-26 10:09:07 +10:00
Andrew Tridgell d0ebb4ca26 MAVLink: fixed another two places where micros() was used for a millisecond time 2012-07-20 11:57:15 +10:00
Jonathan Challinger e271f97b53 Changed mavlink GLOBAL_POSITION_INT.relative_alt message to correctly return altitude above ground. 2012-07-17 16:15:11 +10:00
Andrew Tridgell ead41670c4 Airspeed: change APM to use new AP_Airspeed library
the next step is AHRS dead reckoning
2012-07-16 11:21:50 +10:00
Andrew Tridgell 6ced622da4 APM: fixed some build warnings and type errors 2012-07-06 19:59:18 +10:00
Andrew Tridgell ba39738606 MAVLink: added climb rate reporting 2012-07-05 13:00:46 +10:00
Andrew Tridgell fe54329de2 MAVLink: remove MAVLink 0.9 protocol support
this simplifies the code a lot. We're not going back to 1.0
2012-07-05 13:00:46 +10:00
Andrew Tridgell 1cb96e14a9 SITL: enable the SIM_* parameters in ArduCopter and ArduPlane 2012-06-29 15:10:52 +10:00
Andrew Tridgell 57579e494b Barometer: fixed airstart for APM
we need to re-load the ground pressure and temperature from eeprom on
and airstart
2012-06-27 16:01:50 +10:00
rmackay9 74d37a3713 ArduPlane HIL: fixed bug so g_gps->setHil calls send time as a uint32_t (was sending a float but was cast back to an uint32_t resulting in a meaningless time that never changed). 2012-06-26 22:59:24 +09:00
Amilcar Lucas a12cb8fd9a Added camera trigger functionality 2012-06-13 21:00:20 +02:00