Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
5,548 Commits 71 Branches 509 Tags 758 MiB
Commit Graph

1552 Commits

Author SHA1 Message Date
rmackay9 b876733c0d ArduCopter: added message to console when entering ESC Calibration on startup 2012-10-09 12:31:05 +09:00
rmackay9 c0ad98be31 ArduCopter: failsafe added to shutdown motors if mainloop fails 2012-10-09 12:30:17 +09:00
rmackay9 fa0963d592 ArduCopter: APM_Config.h - make it ever so slightly easier to enable INERTIAL_NAV 2012-10-08 12:31:51 +09:00
rmackay9 3c9ba94f42 ArduCopter: bug fix to ROI when no camera mount is specific 2012-10-08 12:31:10 +09:00
rmackay9 7cf60e61b4 ArduCopter: bug fix in earth-frame to body-frame conversion for roll 2012-10-07 19:14:40 +09:00
rmackay9 05fd04134a ArduCopter: fix heli build 2012-10-06 13:46:19 +09:00
rmackay9 61d0c8e35c ArduCopter: added AP_Semaphore to list of includes 2012-10-06 12:41:58 +09:00
rmackay9 af1d6a9b82 ArduCopter: reduce Stabilize Yaw P term to 4.5 2012-10-03 14:19:49 +09:00
rmackay9 e375a27058 ArduCopter: prioritise rate controllers, rate controller targets converted to body frame 2012-10-03 14:10:31 +09:00
rmackay9 ea4f256f8e ArduCopter: BATT_PIN parameter added to allow you to select which pin is used for voltage and current measurements 
To save a parameter, the current sensor pin is assumed to always be 1 higher than the voltage pin.
 2012-10-02 22:16:19 +09:00
Michael Oborne a38fef65c7 AP,AC Add ability to override an altitude in any auto mode, on the current active target 2012-09-30 07:29:33 +08:00
rmackay9 95763e610b ArduCopter: allow DMP to run in parallel with DCM 
Parallel DMP can be enabled by #define SECONDARY_DMP_ENABLED in APM_Config.h
New DMP dataflash log type added to allow easy comparison with DCM
 2012-09-30 00:25:40 +09:00
rmackay9 8c6fd340d7 AP_AHRS: added scheduler parameter to init 
Required by the AP_AHRS_MPU6000 class which needs to disable timed processes that could interfere with it's communication with the mpu6000
 2012-09-29 13:51:21 +09:00
rmackay9 41fbb19cf5 AP_InertialSensor_MPU6000: replaced _cs_pin parameter with #define and saved 1 byte of memory 
Updated ArduCopter, ArduPlane and example sketches in AP_InertialSensor, AP_IMU and AP_AHRS libraries because they no longer need to pass in cs_pin to the constructor
 2012-09-28 19:21:59 +09:00
rmackay9 bae53807b2 ArduCopter: tiny formatting change in defines.h 2012-09-27 17:40:54 +09:00
rmackay9 280488fa5e ArduCopter: bug fix to display ITERM enabled/disabled properly from cli 
Also changed header for this message type to ITERM instead of just IT to make it more clear what it is
 2012-09-27 17:40:30 +09:00
rmackay9 ed881117e0 ArduCopter: updated version to 2.7.4-Beta 2012-09-25 23:39:15 +09:00
rmackay9 fff5d51694 ArduCopter: reduced Loiter Rate I to 0.04 (was 0.08) 2012-09-25 19:08:31 +09:00
rmackay9 a71aa21514 ArduCopter: increase default Loiter Rate P to 5.0 2012-09-25 12:19:44 +09:00
rmackay9 b2f12c4854 ArduCopter: optical flow initialisation changes now that optical flow library automatically works on APM1, APM2 and APM2.5 2012-09-24 18:39:33 +09:00
rmackay9 889d1bb36c ArduCopter: alt hold bug fix - removed reset next_WP in init_home 2012-09-23 01:00:06 +09:00
rmackay9 b3ff368589 ArduCopter: position lead filters modified to use lag which varies by gps 2012-09-20 15:49:09 +09:00
rmackay9 361ff0c08f ArduCopter: allow PID logging of throttle. Make get_angle_boost actually use parameter passed in. 2012-09-18 23:19:23 +09:00
rmackay9 93ae29a3e9 ArduCopter: added throttle curve (although disabled by default) for all multicopters 2012-09-18 23:05:08 +09:00
rmackay9 498cbb063b ArduCopter: set fast gains while auto trim is being executed 2012-09-18 09:03:29 +09:00
Andrew Tridgell 5fd39bb928 ACM: updates for new GPS detection 
a GPS can now be attached after startup
 2012-09-17 14:45:47 +10:00
rmackay9 6f32f52377 ArduCopter: bug fix in Log_Read_Attitude. It was printing two uninitialised variables. 2012-09-17 13:44:29 +09:00
rmackay9 303ca11c4c HIL: changes to fix HIL for ArduCopter after recent timing changes. 
Changes include using AP_PeriodicProcess and calling imu.init even in HIL mode
 2012-09-15 18:42:56 +09:00
rmackay9 b6d2d4723f ArduCopter: print firmware version of code instead of zero. 2012-09-13 21:49:11 +09:00
rmackay9 9e66b555cb ArduCopter: removed INSTANT_PWM from ArduCopter and AP_Motors library 2012-09-13 21:31:13 +09:00
Jason Short 072085d2d8 ACM : better debugging text 2012-09-12 23:06:06 -07:00
Jason Short 6b6075ed30 ACM l Prevent pre-mature finish of mission 2012-09-12 23:06:06 -07:00
Jason Short 834f961409 ACM : Fix enduf 2012-09-10 21:25:53 -07:00
Jason Short 4c8e257ea2 ACM : forced setup_show to dump params during log dump for better analysis. 2012-09-10 20:52:30 -07:00
Jason Short 34e07c826f ACM : Added centralized Iterm logging at a lower rate. Logs all iterms. 2012-09-10 20:26:48 -07:00
Jason Short e8e8c27db4 ACM Mavlink - fixed comparison of unsigned to signed int by casting to uint8_t 2012-09-10 20:22:57 -07:00
Jason Short a73bc70553 ACM : Params - formatting cleanup 2012-09-10 20:22:11 -07:00
Andrew Tridgell 841d2700b6 ACM: use spare CPU cycles to read the magnetometer 2012-09-10 11:38:18 +09:00
rmackay9 fd110a2723 ArduCopter: modified mainloop timing to be in sync with the arrival of new data from the IMU. 
This reduces the maximum delay between when new sensor data arrives and when it is actually used by about 5ms.
 2012-09-10 11:37:53 +09:00
rmackay9 42406c827a ArduCopter: added NUM_IMU_SAMPLES_FOR_XYZHZ definitions for MPU6000 and Oilpan to allow more syncing of the mainloop with the arrival of data from the IMU. 2012-09-10 11:37:48 +09:00
rmackay9 5d3ddf1fc9 ArduCopter: bug fix for ROI not working if user did not have a camera mount 
Changed verify_nav_roi command to attempt to point at the target if our camera mount type is not pan_tilt nor pan_tilt_roll
 2012-09-10 02:03:32 +09:00
Andrew Tridgell f97104b435 ACM: use compass.accumulate() in ArduCopter 
this gives us a much less noisy magnetometer
 2012-09-08 10:06:04 +10:00
Michael Oborne c1235c55d5 Fix Approach Altitude min 2012-09-06 17:43:58 +08:00
Pat Hickey b02340fe10 APM_Config.h for ArduCopter/ArduPlane: better descr of APM2_BETA_HARDWARE 2012-09-05 15:36:57 -07:00
rmackay9 5073e56c06 ArduCopter: upgraded firmware version to 2.7.3 2012-09-02 12:58:16 +09:00
rmackay9 c9d34c1737 ArduCopter: fixes to allow AP_Mount to work on APM1 with original default channels and fix to reenable support for 3-axis gimbals on APM2. 
Channels 5 to 11 changed to RC_Channel_aux.
Removed channel 9 because APM_RC doesn't support it in any case.
Updated EEPROM format version to 119 because of the change to RC_Channel_aux and because k_param_rc_11 moved to be after k_param_rc_10.
 2012-09-02 12:51:23 +09:00
rmackay9 9013d9be43 ArduCopter: remove unnecessary references to CH_CAM_PITCH, CH_CAM_ROLL, CH_CAM_YAW 2012-09-02 12:47:27 +09:00
Craig Elder 274b2e2143 Arducopter: Release 2.7.2 2012-08-31 19:18:10 -07:00
Andrew Tridgell e8d928cca4 ACM: added TELEM_DELAY to ArduCopter 2012-08-30 09:03:01 +10:00
Jason Short 51969dca22 ACM Log.pde : whitespace clean up 2012-08-28 21:22:07 -07:00