Commit Graph

171 Commits

Author SHA1 Message Date
Gustavo Jose de Sousa 93c80b03ae ArduPlane: standardize inclusion of libaries headers
This commit changes the way libraries headers are included in source files:

 - If the header is in the same directory the source belongs to, so the
 notation '#include ""' is used with the path relative to the directory
 containing the source.

 - If the header is outside the directory containing the source, then we use
 the notation '#include <>' with the path relative to libraries folder.

Some of the advantages of such approach:

 - Only one search path for libraries headers.

 - OSs like Windows may have a better lookup time.
2015-08-11 16:28:40 +10:00
Andrew Tridgell 6c07795b63 Plane: added HIL_SUPPORT define
disable HIL support on APM2 to save flash space
2015-07-30 11:04:31 +10:00
Andrew Tridgell 2f5ade4810 Plane: use 16 bit mask for GCS_PID_MASK 2015-05-27 15:09:47 +10:00
Andrew Tridgell 09476bf9d3 Plane: added GCS_PID_MASK for realtime pid tuning 2015-05-27 14:28:46 +10:00
Randy Mackay 174c55b0af Plane: add support for 4th mavlink channel 2015-05-15 15:07:28 +09:00
Andrew Tridgell edec706c12 Plane: added RUDDER_ONLY parameter
this gives much easier setup for rudder only aircraft.
2015-04-20 09:09:23 +10:00
Michael du Breuil 78a3ce46b9 Plane: Use tecs to control the throttle during takeoff 2015-04-16 08:56:37 +10:00
Michael du Breuil 4b1d71e390 Plane: rebuild the glide slope if we are above it and already climbing
(controlled by GLIDE_SLOPE_THR)
2015-04-13 20:14:51 -07:00
Tom Pittenger 1b0ed277b3 Plane: Disarm On Land
After a landing has occur using a LAND waypoint, automatically disarm
after this many seconds have passed. Use 0 to not disarm.
2015-03-17 10:30:41 +11:00
Andrew Tridgell 1c1798fb11 Plane: support much smoother flare transitions
provide the height above the ground to TECS so it can make a smarter
pre-flare transition
2015-03-15 13:53:08 +11:00
Andrew Tridgell b0cdf8952b Plane: added HIL_MODE parameter
this allows for HIL with any firmware
2015-03-13 22:52:56 +11:00
Michael Day b02098e19e Plane: Make radio trim optional at ground start. 2015-03-13 13:11:44 +11:00
Tom Pittenger 420e9e0d2e Plane: added INITIAL_MODE which is the mode we boot up into.
This is useful when flying without a RX or if you have a RX that
outputs zeros without a detected Txmtr
2015-03-13 13:04:23 +11:00
Andrew Tridgell 16cdf64d63 Plane: added CLI_ENABLED option
this disables using CLI by default, even if compiled in. This is
needed to make standard firmwares work well with companion computers
where the CLI may cause startup issues
2015-03-09 17:58:37 +11:00
Andrew Tridgell bee703ab2a Plane: removed incorrect conditional on parameter enum 2015-02-21 20:23:22 +11:00
Randy Mackay 3a1465c9d1 Plane: integrate SerialManager
call SerialManager init_console on startup
use SerialManager's set_block_writes_all
2015-01-29 14:05:15 +11:00
Randy Mackay 681d28838f Plane: integrate mount frontend-backend restructure
initialise mount on startup
use mount.has_pan_control method
remove calls to unimplemented mount.configure_cmd
remove call to update_mount_type which is now handled by mount lib
2015-01-29 13:57:18 +11:00
priseborough 2500f7e9c2 Plane : Add data logging for optical flow use with EKF 2014-12-06 18:16:48 +11:00
Andrew Tridgell 135f9b2c54 Plane: added STALL_PREVENTION option
this will allow users to disable it if it proves to be a problem with
no airspeed sensor
2014-11-13 14:06:00 +11:00
Andrew Tridgell 913004beb0 Plane: added OVERRIDE_CHAN parameter
this allows both for testing PX4IO override on the ground, and for
forced manual override while flying, including re-arming after in-air
reboot
2014-11-07 10:39:07 +11:00
Michael Day be17bfd972 Plane: Added parameter RTL_AUTOLAND and implementation. 2014-10-20 08:36:20 +11:00
Andrew Tridgell 5af4cefff3 Plane: added FLAP_SLEWRATE parameter
makes for smoother transition of flaps
2014-08-29 20:31:03 +10:00
Andrew Tridgell f66039c9b4 Plane: added TKOFF_FLAP_PCNT and LAND_FLAP_PERCENT
easier control of flaps for takeoff and landing
2014-08-29 20:31:03 +10:00
Andrew Tridgell 988662027e Plane: moved LAND_PITCH_CD into TECS 2014-08-27 20:13:19 +10:00
Andrew Tridgell 50f492a69f Plane: added RNGFND_LANDING option
this allows the use of a rangefinder for landing flare and landing
approach
2014-08-27 17:14:19 +10:00
Andrew Tridgell f2f730ba9b Plane: added FBWA_TDRAG_CHAN parameter
this allows for testing taildragger takeoffs in FBWA mode
2014-08-24 19:39:51 +10:00
Andrew Tridgell 9184e47f84 Plane: added TERRAIN_LOOKAHD parameter
distance to look forward for terrain following
2014-08-07 09:31:03 +10:00
Andrew Tridgell 2a288824c0 Plane: make STAB_PITCH_DOWN in degrees
try to avoid new centi-degrees parameters
2014-08-06 17:59:18 +10:00
Andrew Tridgell 8610d9a8ea Plane: added GLIDE_SLOPE_MIN parameter
this is used to prevent slow glide slopes being used for small
altitude changes in missions. This allows more accurate tracking of
altitude with terrain changes
2014-08-04 21:02:13 +10:00
Andrew Tridgell b64ab07ca4 Plane: added STAB_PITCH_DN_CD parameter
this adds some down trim when at throttle levels below the trim
throttle in FBWA mode.

defaults to 200 centi-degrees. I may adjust based on flight tests
2014-08-03 17:17:20 +10:00
Matthias Badaire 57253fc2ee Rover: Add SERIAL2_PROTOCOL for GCS and FRSky telemtry
This allows selection of protocol type on telem2. The default is MAVLink, but can be selected as FrSky protocol
2014-07-29 17:08:20 -07:00
Andrew Tridgell b158b7e5a9 Plane: replace HAVE_AP_TERRAIN with AP_TERRAIN_AVAILABLE 2014-07-25 07:59:54 +10:00
Andrew Tridgell 3e320d71ab Plane: added TERRAIN_FOLLOW parameter
when enabled RTL, CRUISE and rally points will use terrain altitude
2014-07-24 21:50:19 +10:00
Andrew Tridgell 32bfeed169 Plane: incorporate terrain mavlink calls 2014-07-24 21:45:47 +10:00
Andrew Tridgell 28e1449e8d Plane: updates for new AP_RangeFinder API 2014-07-08 15:07:50 +10:00
Andrew Tridgell 055d8fe7aa Plane: added TKOFF_THR_MAX parameter 2014-05-24 22:19:50 +10:00
Andrew Tridgell d87619c2f1 Plane: added 4 new parameters to control takeoff
this gives flexible control for taildragger takeoff
2014-05-23 07:30:58 +10:00
Andrew Tridgell 94d528e548 Plane: changed baudrate parameters to 16 bit 2014-05-21 12:45:25 +10:00
Michael Day 568fc9e6c9 Plane: Now using AP_Rally library. 2014-04-19 09:16:05 +10:00
Andrew Tridgell d30c4ffe80 Plane: added AUTOTUNE_LEVEL parameter 2014-04-13 22:12:27 +10:00
Emile Castelnuovo a111d174c1 Plane: added VRBRAIN #defines and #includes 2014-04-08 16:19:20 +10:00
Andrew Tridgell e19341ca32 Plane: convert to new GPS driver API 2014-04-01 06:38:24 +11:00
Michael Day f921d4fbac Plane: FENCE_RET_RALLY param. Plane returns to rally point on breach. 2014-03-27 09:26:20 +11:00
Michael Day 25f23cf16c Plane: Sends MAV_SYS_STATUS_GEOFENCE and also allows GCS to enable/disable fence. 2014-03-27 09:26:20 +11:00
Andrew Tridgell ff70c87f0b Plane: support 14 RC channels on PX4 2014-03-25 14:47:05 +11:00
Randy Mackay fdaf3fc177 Plane: add AP_Mission object to parameter list 2014-03-19 12:10:54 +09:00
Randy Mackay a76e2ab02e Plane: reserve NavEKF slot in param list even when not used
Although this wasn't a problem immediatley, if someone had added a
parameter after k_param_NavEKF it's position in eeprom could have moved
as AP_AHRS_NAVEKF_AVAILABLE was enabled/disabled
2014-02-21 13:53:05 +09:00
Paul Riseborough 8c4b0b9be9 Plane : NavEKF Mavlink tunable parameter - first attempt 2014-02-15 05:48:22 +11:00
Andrew Tridgell c3b7e76c28 Plane: added flaperon support
this adds FLAPERON_OUTPUT and FLAP_IN_CHANNEL to allow both manual
and auto flap control for both normal flaps and flaperons
2014-02-06 12:38:59 +11:00
Andrew Tridgell 6cabca690e Plane: fixed RSSI_RANGE enum
many thanks to Valince for spotting this
2014-01-31 12:14:18 +11:00