Commit Graph

72 Commits

Author SHA1 Message Date
Andrew Tridgell bc1de7a208 HAL_ChibiOS: support STM32F3xx MCUs 2019-11-01 10:53:53 +11:00
Mirko Denecke b84dcd483d AP_HAL_ChibiOS: remove unnecessary tabs and whitespaces 2019-10-21 08:01:56 +11:00
Andrew Tridgell bf2cf7834d HAL_ChibiOS: fixed a bug in parity/stop-bit setting on STM32F7 and H7
and add get_options() method
2019-09-06 08:51:45 +10:00
Andrew Tridgell d1565a96c5 HAL_ChibiOS: wrap cacheBuffer functions
needed to avoid problem with end() method in UARTDriver shadowing with
F7 implementation of cache macros
2019-08-27 15:40:43 +10:00
Andrew Tridgell 16bdaaa1af HAL_ChibiOS: added support for STM31F10x for AP_Periph 2019-08-27 10:29:56 +10:00
Andrew Tridgell 8080efbc6a HAL_ChibiOS: allow for blocking unbuffered uarts
this is used by AP_IOMCU to avoid a race condition where the mutex is
busy on write() causing a zero-length write and delayed output
2019-08-17 17:36:41 +10:00
Andrew Tridgell afc8a70ce4 HAL_ChibiOS: fixed a bug in wait_timeout() on UARTs
wait_timeout() could return true on a read of less bytes than are
expected.
2019-08-17 17:36:41 +10:00
Siddharth Purohit 2f0d1336e6 HAL_ChibiOS: add support for dual usd cdc 2019-07-12 17:01:21 +10:00
Andrew Tridgell 7e1048c89b HAL_ChibiOS: enable UART inversion on H7 2019-03-01 11:39:27 +11:00
Andrew Tridgell 64681cb05c HAL_ChibiOS: allocate threads from any heap
this fixes a failure on MatekF405-Wing where it fails to allocate the
SPI thread for the IMU
2019-02-27 11:54:28 +11:00
Andrew Tridgell dad1774330 HAL_ChibiOS: fixed channel selection for F4/F7 uart driver 2019-02-26 16:18:26 +11:00
Andrew Tridgell 9647a68c9e HAL_ChibiOS: fixed UART RX DMA for H7 2019-02-26 16:18:26 +11:00
Andrew Tridgell 231117e9b1 HAL_ChibiOS: invalidate before read on rx, not on DMA setup
more efficient, as we only invalidate what was used
2019-02-26 16:18:26 +11:00
Andrew Tridgell 071d5e01af HAL_ChibiOS: added DMAMUX channel assignment calls 2019-02-26 16:18:26 +11:00
Andrew Tridgell f4e31ce65b HAL_ChibiOS: added more cache flush ops 2019-02-26 16:18:26 +11:00
Andrew Tridgell dd8115c9b4 HAL_ChibiOS: check for already allocated TX dma in UART driver 2019-02-26 16:18:26 +11:00
Andrew Tridgell d9c888ab45 HAL_ChibiOS: port SPI, I2C and UART drivers to H7 2019-02-26 16:18:26 +11:00
Andrew Tridgell bbd25350eb HAL_ChibiOS: support ChibiOS kernel major 6
preparing for STM32H7 support
2019-02-26 16:18:26 +11:00
Siddharth Purohit b5fbdc9888 HAL_ChibiOS: invoke serial data event signal for non dma ports as well 2019-01-23 15:57:05 +11:00
Andrew Tridgell 8c43db1a00 HAL_ChibiOS: implement half-duplex delay and read locking 2018-12-29 15:58:22 +11:00
Andrew Tridgell 013f1d55e8 HAL_ChibiOS: added support for swapping UART pins 2018-11-20 18:25:35 +11:00
Andrew Tridgell d84bc9f556 HAL_ChibiOS: fixed STM32F7 RXINV flag 2018-11-16 15:48:21 +11:00
Andrew Tridgell 85243ad522 HAL_ChibiOS: enable support for half-duplex uart config 2018-11-14 19:05:09 +11:00
Andrew Tridgell acf03980ca HAL_ChibiOS: added UART inversion options
support GPIO pins or STM32F7
2018-11-14 19:05:09 +11:00
Andrew Tridgell 8c962e6f0f HAL_ChibiOS: use a larger TX buffer on USB
this is needed for fast log download on vehicles with 50Hz main loop
2018-08-28 08:50:50 +10:00
Francisco Ferreira 1b46104a98 AP_HAL_ChibiOS: fix warning when STDOUT is defined
../../libraries/AP_HAL_ChibiOS/UARTDriver.cpp:118:12: warning: 'int hal_console_vprintf(const char*, va_list)' defined but not used [-Wunused-function]
 static int hal_console_vprintf(const char *fmt, va_list arg)
            ^
2018-08-14 10:17:38 +10:00
Andrew Tridgell 7aba99e229 HAL_ChibiOS: fixes for ChibiOS version update 2018-08-03 13:44:59 +10:00
Siddharth Purohit 395c48933c HAL_ChibiOS: move tto using updated time conversion API 2018-08-03 13:44:59 +10:00
Andrew Tridgell 44fd85ff29 HAL_ChibiOS: reduce memory used by serial buffers
this does not appear to affect log download speed. It saves about 27k
of memory
2018-08-01 13:11:16 +10:00
Andrew Tridgell 83f38d536e HAL_ChibiOS: fixed flow control auto-detect without DMA
this fixes automatic flow control detection when we are not using DMA
for TX
2018-07-13 07:34:30 +10:00
Andrew Tridgell 50f7e55f0b HAL_ChibiOS: don't clear buffers if no baudrate change 2018-07-12 11:41:31 +10:00
Michael du Breuil 153ee6ca8e AP_HAL_ChibiOS: Clear UART buffers when opening a port 2018-06-26 02:18:18 +01:00
Michael du Breuil 037e53ba8a AP_HAL_ChibiOS: Reduce flash space of UARTDriver
Saves 32 bytes
2018-06-26 02:18:18 +01:00
Andrew Tridgell 369ac5edd0 HAL_ChibiOS: save more space in the bootloader 2018-06-25 21:22:31 +10:00
Andrew Tridgell e3b68876a9 HAL_ChibiOS: fixed tx_len on tx DMA timeout 2018-06-19 09:08:45 +10:00
Andrew Tridgell 8431a677d9 HAL_ChibiOS: added a timeout to DMA UART TX
this prevents a shared DMA channel being held for a long time if a CTS
pin is held either by not being connected or by a radio
2018-06-19 09:08:45 +10:00
Andrew Tridgell 2493cdbcb6 HAL_ChibiOS: switch to new bouncebuffer system
this removes the dma_flush and dma_invalidate methods and uses a
common bouncebuffer system for all CPU types. This enables microSD
support on STM32F7
2018-06-06 07:15:41 +10:00
Andrew Tridgell 0fade4eb9e HAL_ChibiOS: make sure the UART bounce buffers are DMA safe 2018-06-06 07:15:41 +10:00
Andrew Tridgell edb831653f HAL_ChibiOS: added dma_flush and dma_invalidate operations
these are needed to manage the data cache on the STM32F7
2018-06-06 07:15:41 +10:00
Andrew Tridgell 7b720aae46 HAL_ChibiOS: allow printf() to work on systems without debug console
map to hal.console once initialised
2018-05-26 19:06:25 +10:00
Andrew Tridgell 89898bae1d HAL_ChibiOS: take account of available bytes in receive_time_constraint_us 2018-05-21 14:53:18 +10:00
Andrew Tridgell 7005383f82 HAL_ChibiOS: implement uart receive timestamp API 2018-05-16 18:49:22 +10:00
mirkix cb50639e27 AP_HAL_ChibiOS: add STM32F7 UART support 2018-05-15 07:23:56 +10:00
Andrew Tridgell 5854ccbb4c HAL_ChibiOS: removed stray debug code
thanks to @alielectric for noticing
2018-05-03 17:04:14 +10:00
Andrew Tridgell e4ce2f532b HAL_ChibiOS: make smaller builds possible
this allows for much smaller builds when you disable a lot of
options. This is part of an effort to create a bootloader of less than
16k using ChibiOS
2018-04-12 11:50:44 +10:00
Andrew Tridgell e448b5d069 HAL_ChibiOS: implement UART port locking 2018-04-07 09:10:29 +10:00
Andrew Tridgell bc32276966 HAL_ChibiOS: support DShot output
use DMAR burst DMA to minimise number of DMA channels needed

thanks to betaflight for the great reference implementation!
2018-04-07 09:10:29 +10:00
Andrew Tridgell a64819cbf2 HAL_ChibiOS: minimise DMA TX latency on contended UARTs
try to prevent long delays on other users of a DMA channel
2018-04-07 09:10:29 +10:00
Andrew Tridgell 556f3ba53f HAL_ChibiOS: make UARTs non-blocking by default
we never want blocking ports any more with ArduPilot, so defaulting to
blocking makes no sense
2018-03-02 21:39:38 +11:00
Andrew Tridgell 91c741ef07 HAL_ChibiOS: use a non-blocking lock for UART shared DMA
we can have multiple UARTs on the same thread sharing the same DMA TX
channel. That can lead to deadlock with blocking locks on DMA. This
makes UART requests for DMA locks non-blocking to fix the issue
2018-03-02 21:39:38 +11:00