Randy Mackay
3a1465c9d1
Plane: integrate SerialManager
...
call SerialManager init_console on startup
use SerialManager's set_block_writes_all
2015-01-29 14:05:15 +11:00
Randy Mackay
681d28838f
Plane: integrate mount frontend-backend restructure
...
initialise mount on startup
use mount.has_pan_control method
remove calls to unimplemented mount.configure_cmd
remove call to update_mount_type which is now handled by mount lib
2015-01-29 13:57:18 +11:00
Andrew Tridgell
5d8cec23db
Plane: update version to 3.2.1beta1
2015-01-27 17:22:13 +11:00
Robert Lefebvre
395c868727
Plane: Change Compass logging to new DataFlash method that handles instances.
2015-01-21 14:37:54 +09:00
Andrew Tridgell
059c3769f3
Plane: cope with the changed semantics if airspeed.use()
2015-01-20 11:28:35 +11:00
Dario Lindo Andres
0ea7a7a0cc
Plane: Corrected LOGGING_ENABLED
...
When we configure LOGGING_ENABLED to DISABLED code does not
compile. Now it works!
2015-01-17 10:42:11 +13:00
Andrew Tridgell
b8bfa755a9
Plane: raise alpha version
2015-01-09 15:47:47 +11:00
Andrew Tridgell
035b1302ed
Plane: updates for new AP_Baro API
2015-01-09 11:50:54 +11:00
Staroselskii Georgii
dc410a4b42
Plane: added AK8963 support
2015-01-07 08:41:13 +11:00
Andrew Tridgell
8708297341
Plane: update for new OptFlow API
2015-01-03 14:16:33 +11:00
Andrew Tridgell
ae96a48efc
Plane: use location_path_proportion()
...
this should produce better glide slopes when the aircraft is off
course
2015-01-01 15:17:45 +11:00
Randy Mackay
11def53ca7
Plane: pre_arm_gps_check flag always true
2014-12-26 12:32:38 +09:00
Andrew Tridgell
0599f1dcb1
Plane: changed version number to 3.2.1alpha1
2014-12-06 18:37:39 +11:00
priseborough
f23722ecee
Plane: Remove statement about flow driver rate in comment
2014-12-06 18:16:48 +11:00
priseborough
ca53d5fb62
Plane: Increase rate at which optical flow sensor is checked
...
The sensor driver runs asynchronously at 10Hz, so needs to be checked frequently for arrival of data.
2014-12-06 18:16:48 +11:00
priseborough
2db9247117
Plane : Add logging and EKF read for updated flow sensor interface
2014-12-06 18:16:47 +11:00
priseborough
f047e35167
Plane : Enable optical flow by default if sensor is fitted
2014-12-06 18:16:46 +11:00
priseborough
9707989b9f
Plane : Preliminary optical flow integration
2014-12-06 18:16:45 +11:00
Andrew Tridgell
d1fb137651
Plane: mark development version 3.2.1alpha
2014-11-29 06:59:47 +11:00
Andrew Tridgell
b88e6b6302
Plane: prepare for 3.2.0 release
2014-11-25 13:58:28 +11:00
Andrew Tridgell
826ae8ee8b
Plane: prepare for 3.1.2beta3
2014-11-21 14:50:04 +11:00
Andrew Tridgell
0672d1fc3c
Plane: mark beta2
2014-11-16 14:41:37 +11:00
Evan Slatyer
c4093b159f
ArduPlane failsafes: remove rc_override_active
...
- rc_override_active is never set anywhere in the ArduPlane code; it's only used for Copter and Rover. Removing it significantly simplifies the failsafe code.
- modified code has been tested in SITL. Heartbeat and RC failures in AUTO, CRUISE, and RTL modes (covering the three cases in the failsafe check functions) have been simulated with FS_LONG_ACTN = 0, 1, and 2, FS_SHORT_ACTN = 0, 1, and 2, and FS_GCS_ENABL = 0, 1, and 2. In all cases the results are identical to those with the original code.
2014-11-14 11:35:27 +11:00
Andrew Tridgell
c8060cb9f7
Plane: use load factor to limit nav_roll_cd
...
this calculates the aerodymanic load factor from smoothed airspeed and
uses it to limit roll to keep it below the level where the load factor
would take us past the aerodymanic limit of the airframe
2014-11-12 13:36:02 +11:00
Andrew Tridgell
44ee1fcd3c
Plane: prevent large G_Dt_max report on startup
2014-11-10 07:09:31 +11:00
Andrew Tridgell
16fd113020
RC_Channel: added channel_function()
...
this is used in the plane mixing code
2014-11-07 10:39:07 +11:00
Andrew Tridgell
913004beb0
Plane: added OVERRIDE_CHAN parameter
...
this allows both for testing PX4IO override on the ground, and for
forced manual override while flying, including re-arming after in-air
reboot
2014-11-07 10:39:07 +11:00
Andrew Tridgell
ad58822cb5
Plane: removed impossible boolean check
2014-10-24 22:04:05 +11:00
Andrew Tridgell
959cd11cb1
Plane: save a byte in auto_state
...
keep single bits together to save space on APM2
2014-10-24 22:03:34 +11:00
Michael Day
01f611daa9
Plane: "Go around" operation. Assumes go around behavior follows land wp.
2014-10-24 21:51:46 +11:00
Michael Day
c1b949a74f
Plane: Bugfix. Changing to landing sequence now works at mission end.
2014-10-24 21:42:06 +11:00
Andrew Tridgell
240e87dc2c
Plane: update for new AP_InertialSensor API
2014-10-24 12:10:38 +11:00
Andrew Tridgell
05c325a12a
Plane: display min as well as max loop delta_t
2014-10-22 18:27:12 +11:00
Andrew Tridgell
f87da51b37
Plane: prevent calling jump_to_landing_sequence() too often
2014-10-20 08:36:20 +11:00
Andrew Tridgell
7ecc87a787
Plane: improved check for reaching RTL point for auto-land
2014-10-20 08:36:20 +11:00
Michael Day
be17bfd972
Plane: Added parameter RTL_AUTOLAND and implementation.
2014-10-20 08:36:20 +11:00
Andrew Tridgell
4c984d9331
Plane: start preparing for 3.1.2
2014-10-13 10:25:53 +11:00
Andrew Tridgell
71d786187e
Plane: make auto takeoff independent of compass
...
this solves a problem of poor initial yaw due to poor compass offsets
causing a takeoff to not be in the direction the plane is pointing. A
summed gyro is used until the GPS speed is above 5m/s for 2 seconds,
then the GPS heading corrected by the summed gyro error is used for L1
based navigation for the rest of the takeoff
2014-10-07 07:17:46 +11:00
Andrew Tridgell
4b01cee330
Plane: send heartbeat to AFS when calibrating sensors
2014-09-24 12:02:39 +10:00
Andrew Tridgell
7b4181dc14
Plane: prepare for 3.1.1 release
2014-09-12 11:07:26 +10:00
Andrew Tridgell
988662027e
Plane: moved LAND_PITCH_CD into TECS
2014-08-27 20:13:19 +10:00
Andrew Tridgell
186806c768
Plane: lowpass the rangefinder correction, not height
...
this should produce less lag as the rangefinder correction should be
changing much less
2014-08-27 18:25:17 +10:00
Andrew Tridgell
a6ee46086c
Plane: allow continued use of rangefinder data for 5s after loss of contact
...
this allows short outages to be ridden out
2014-08-27 17:14:19 +10:00
Andrew Tridgell
b6319a9d19
Plane: keep an estimate of the rangefinder altitude
...
only accept data when we have had 10 samples in a row in range at 50Hz
2014-08-27 17:14:19 +10:00
Andrew Tridgell
5f3ac159ba
Plane: start working towards 3.1.1
2014-08-27 17:14:19 +10:00
Andrew Tridgell
e880de67ed
Plane: prepare for 3.1.0 release
2014-08-26 06:20:37 +10:00
Andrew Tridgell
6e5344bc8d
Plane: prepare beta4
2014-08-25 22:20:52 +10:00
Andrew Tridgell
7649907ec2
Plane: run terrain.update() more often
...
this provides faster checking of mission waypoints
2014-08-25 14:55:40 +10:00
Andrew Tridgell
f2f730ba9b
Plane: added FBWA_TDRAG_CHAN parameter
...
this allows for testing taildragger takeoffs in FBWA mode
2014-08-24 19:39:51 +10:00
Andrew Tridgell
79fa22e4ad
Plane: use gcs_send_text_fmt() for SCHED_DEBUG timing
...
lets values be saved in mavlink logs
2014-08-19 10:08:17 +10:00