Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
64,903 Commits 71 Branches 509 Tags 743 MiB
Commit Graph

4942 Commits

Author SHA1 Message Date
Andy Piper 2e194383d2 Plane: log ANG attitude message 2024-09-17 10:12:35 +10:00
Bob Long a5c8b03925 Plane: try left/right throttle to init ESC scaling 
Without this, twin motor planes with DroneCAN ESCs need to set a
dummy throttle channel for scale_esc_to_unity to work.
 2024-09-17 09:18:36 +10:00
Iampete1 f000ab6d1b ArduPlane: add Airspeed to raw sensor stream rates 2024-09-17 09:10:17 +10:00
Andrew Tridgell 83cac93e85 Plane: allow for any orientation of rangefinder for landing 
this is principally for tailsitters where rangefinders would be
orientation with RNGFND1_ORIENT=12 (PITCH_180), but also allows for
custom orientations which will be useful if the rangefinder is tilted
forward
 2024-09-14 08:39:51 +10:00
Andrew Tridgell f3b4f8fdc4 Plane: added Q_APPROACH_DIST 
this sets a minimum distance to use the fixed wing approach logic. It
is an alternative to just disabling the approach with Q_OPTIONS which
some users do to avoid some short distance problems. This allows the
approach to still be used for longer distances in QRTL but have it
disabled for shorter distances
 2024-09-12 20:48:48 +10:00
Andy Piper 8596466d5a Plane: Write_Rate() moved to AC_AttitudeControl 2024-09-10 16:33:04 +01:00
Peter Barker c99fc688e1 ArduPlane: avoid nullptr dereference on bad rcmap value entry 2024-09-10 22:00:50 +10:00
Andy Piper d309275866 Plane: log attitude target in degrees 2024-09-10 10:54:55 +10:00
Andrew Tridgell 65e15f2bd9 Plane: don't run TECS update_speed_height() when in idle mode 2024-09-10 10:15:34 +10:00
Andrew Tridgell 2f19dfef8a Plane: added glider pullup support 2024-09-10 10:15:34 +10:00
Peter Barker 1476c69d84 ArduPlane: remove AUX_FUNC entries based on feature defines 2024-09-08 00:55:43 +10:00
Randy Mackay 7f3b552ac7 Plane: 4.5.6 release notes 2024-09-04 07:36:58 +10:00
George Zogopoulos bc1e490257 Plane: In transition use TRIM_THROTTLE when TKOFF_THR_MIN==0 2024-08-28 18:18:55 +10:00
George Zogopoulos 6fee0eccad Plane: Removed all instances of in_back_transition 
It is not currently used anywhere.
 2024-08-28 18:18:55 +10:00
George Zogopoulos 3b247a346a Plane: TKOFF_THR_MIN is applied to SLT transitions 
Also split in_transition() to forward and backward.
 2024-08-28 18:18:55 +10:00
Iampete1 f9f9beb858 Plane: add ICEngine start/stop aux function 2024-08-27 09:37:34 +10:00
Iampete1 5a3fb37214 Plane: call ICE init 2024-08-27 09:37:34 +10:00
Ido Buchman e037b0b985 ArduPlane: add support for deca frame in QuadPlane::setup 
The deca frame is properly supported for Copter and as the quadplane vtol setup calls upon the copter frames, it should also be supported for arduplane vtol for anyone who wants to work 10 vertical motors.
 2024-08-21 17:34:19 +01:00
Randy Mackay 32cee974e4 Plane: 4.5.6-beta1 release notes 2024-08-21 19:35:33 +10:00
Peter Barker d8252d81f8 ArduPlane: emit MAV_RESULT_DENIED if start/stop item passed to MAV_CMD_MISSION_START 2024-08-20 09:38:43 +10:00
timtuxworth f63568b34b ArduPlane: Bindings for crosstrack in Lua 2024-08-20 09:10:42 +10:00
Iampete1 698f8fb40e Plane: Qautotune: use new disarmed call and add new aux function 2024-08-13 08:57:44 +09:00
magate d5bd30bce0 Plane: do not set desired vel/accel on takeoff 
This effectively bypasses the input shaping.

Currently this creates a step change in the position controller.
 2024-08-13 09:21:27 +10:00
Peter Barker 2632e5b8a6 Plane: use enum class for VTOL approach stage 
also namespace it with the state variable which uses this type
 2024-08-07 17:52:25 +10:00
Peter Barker 994e3edfb5 Plane: move braces to be around entire case in do_aux_function 2024-08-07 12:22:49 +10:00
Peter Barker 74bf618a32 ArduPlane: add build_option.py entry for Plane offboard-guided control 2024-08-06 17:45:17 +10:00
George Zogopoulos 14b505c3cb ArduPlane: Fixed typos 2024-08-06 14:03:27 +10:00
Peter Barker 2fd10d5ff2 Plane: remove ancient parameter conversion code 
upgrading from 3.7 to 4.6 will not work as well as it otherwise might after this...
 2024-08-06 09:55:27 +10:00
Peter Barker a6cda46de3 Plane: stop using ENABLED against OSD_ENABLED 
it uses 1 in AP_OSD_config.h
 2024-08-05 10:20:14 +10:00
Peter Barker b1659649ed Plane: remove ENABLED/ENABLE defines 2024-08-05 10:20:14 +10:00
Peter Barker c2f5c48fe5 Plane: rename OFFBOARD_GUIDED to AP_PLANE_OFFBOARD_GUIDED_SLEW_ENABLED 
and remove comparison vs ENABLED
 2024-08-05 10:20:14 +10:00
Peter Barker da562369b5 Plane: remove replace PARACHUTE define with AP_PARACHUTE_ENABLED 2024-08-05 10:20:14 +10:00
Randy Mackay 7513b202c7 Plane: 4.5.5 release notes 2024-08-01 16:02:00 +10:00
George Zogopoulos 85bb4ad88f Plane: Revert min throttle during transitions 2024-07-31 18:23:40 +10:00
George Zogopoulos ae6f41f414 Plane: Fixed unhandled TKOFF_THR_MAX=0 case 2024-07-31 18:23:40 +10:00
Peter Barker aec3feee25 ArduPlane: add build option to not send RC_CHANNELS_RAW 
we keep this around in case we break old OSD setups
 2024-07-30 10:29:58 +10:00
Iampete1 55f51eabe8 Plane: move `have_autoenabled_fences` to be private in `ModeTakeoff` 2024-07-30 09:59:01 +10:00
Randy Mackay 2806f8b63b Plane: 4.5.5-beta2 release notes 2024-07-29 16:19:30 +10:00
George Zogopoulos c213ee2ef8 Plane: Converted paramter TKOFF_MODE into TKOFF_OPTIONS 2024-07-29 15:50:32 +10:00
George Zogopoulos 773c91cec1 ArduPlane: Added minimum throttle during TAKEOFF mode 
This is a rework so that servos.cpp is responsible for setting the
throttle limits under more circumstances and always notifies TECS when
it does so.

Additionally, the TAKEOFF mode has been improved with a new parameters
TKOFF_MODE and TKOFF_THR_MIN that extend the throttle behaviour.
 2024-07-29 15:50:32 +10:00
Ep Pravitra fe2e75b2a0 Plane: option to immediately climb in AUTO mode (not doing glide slope) 
add comment in Parameters.cpp

Update ArduPlane/altitude.cpp

Co-authored-by: Peter Hall <33176108+IamPete1@users.noreply.github.com>

clarification in FLIGHT_OPTIONS description

change the comment

param comment change

Update ArduPlane/Parameters.cpp

Co-authored-by: Peter Barker <pb-gh@barker.dropbear.id.au>
 2024-07-25 09:49:07 +10:00
Peter Barker c451518bdd ArduPlane: correct compilation with AP_RRSI_ENABLED false 
Co-authored-by: David Buzz <davidbuzz@gmail.com>
 2024-07-24 09:11:39 +10:00
Andy Piper f8e5c7c1c4 Plane: address minor review comments 2024-07-24 08:24:06 +10:00
Andrew Tridgell d845af9bc3 Plane: fixed re-enable of fence for FENCE_AUTOENABLE=1 
the is an adjustment to the previous fix which only worked when we had
at least one fence element enabled when we were not flying or disarmed
 2024-07-24 08:24:06 +10:00
Andrew Tridgell 5d46e0c64e Plane: reset previous mode fence breach when disarmed 
when we are disarmed or we are not in fence breach and we are not
flying then reset the previous mode fence reason state so that a new
flight will get the correct fence breach action behaviour
 2024-07-24 08:24:06 +10:00
Andy Piper e4f76cd27d Plane: reject guided destinations outside the fence 2024-07-24 08:24:06 +10:00
Andy Piper e4cbee133b Plane: only disable fences when in landing phase 2024-07-24 08:24:06 +10:00
Andy Piper a11cc6ea66 Plane: use generic fence handling in missions 2024-07-24 08:24:06 +10:00
Andy Piper 46d6d0bf03 Plane: disable fences for landing by suppressing in the fence check rather than using a state machine 2024-07-24 08:24:06 +10:00
Andy Piper ee7742ac40 Plane: use reset_fence_floor_enable() 2024-07-24 08:24:06 +10:00