Commit Graph

106 Commits

Author SHA1 Message Date
Pat Hickey d9e0bbbbab ArduCopter: first pass at AP_HAL porting
* changed all the byte types to uint8_t
* fixed up much of the serial stuff
2012-12-20 14:52:27 +11:00
Jason Short 19ae5c30eb ACM : Formatting 2012-12-13 20:12:39 -08:00
Andrew Tridgell 6fbf5ec8f2 Copter: update ArduCopter for new ins interface 2012-11-30 07:15:18 +11:00
Andrew Tridgell bcae83c4f6 ACM: make it possible to run CLI on radio port in ArduCopter 2012-11-21 21:41:34 +11:00
Andrew Tridgell a3c3c59b82 ACM: fixed some memory cast warnings 2012-11-19 08:42:36 +11:00
rmackay9 07a7a1acd8 ArduCopter: replaced digitalRead and digitalWrite with faster calls
improved performance logging to dataflash
2012-11-19 01:16:07 +09:00
Jason Short 549489ddbb ACM : Setup, format 2012-11-09 22:15:16 -08:00
rmackay9 d9b4407e64 AP_InertialSensor: changes after review with Tridge.
sanity checking added to accelerometer calibration routine.
user feedback is sent using gcs_send_text_fmt instead of Serial.printf.
moved ins parameters to new eeprom number to avoid conflicts with older parameters.
other small changes including renaming of functions and parameters.
2012-11-07 19:21:15 +09:00
rmackay9 a1b4ec6d0e ArduCopter: move to use new INS library instead of IMU library 2012-11-07 19:21:09 +09:00
rmackay9 78316adf75 ArduCopter: replace Serial.print with Serial.print_P to save memory.
Includes replacing flight_mode_strings with print_flight_mode function.
SendDebug macro replaced with direct Serial.print_P calls.
2012-10-22 16:45:24 +09:00
rmackay9 401fb4101c ArduCopter: removed deprecated mag offset routine.
Also removed commented-out block of code from navigation.pde.
2012-10-17 19:47:21 +09:00
Andrew Tridgell 5fd39bb928 ACM: updates for new GPS detection
a GPS can now be attached after startup
2012-09-17 14:45:47 +10:00
rmackay9 b6d2d4723f ArduCopter: print firmware version of code instead of zero. 2012-09-13 21:49:11 +09:00
Jason Short 072085d2d8 ACM : better debugging text 2012-09-12 23:06:06 -07:00
Jason Short 4c8e257ea2 ACM : forced setup_show to dump params during log dump for better analysis. 2012-09-10 20:52:30 -07:00
uncrustify bb6e4ac969 uncrustify ArduCopter/setup.pde 2012-08-21 19:19:50 -07:00
Andrew Tridgell 6d11940ada AHRS: removed Quaternion build support from APM/ACM/rover 2012-08-22 10:42:21 +10:00
rmackay9 36f947acb9 ArduCopter: changed all "int" to "int16_t" and a few "long"s to "int32_t".
Also moved "simple_counter" variable from global scope to the "update_simple_mode" function which is the only place that it's actually used.
2012-08-16 20:04:46 +09:00
Andrew Tridgell 103b02fe94 ACM: removed pointless load() calls 2012-08-08 16:51:14 +10:00
Andrew Tridgell 0a12b6ad6f ACM: fixed HIL build with new accel setup code 2012-07-20 12:46:16 +10:00
Jason Short c9d3ab5413 Oilpan ADC parameters added
including a function that configures each Accel Axis
Defaults matching old behavior
Added param group
2012-07-18 22:57:11 -07:00
Andreas M. Antonopoulos d4a0cb5db1 Added Michael Pursifull's Maxsonar HRLV model support 2012-07-11 18:46:47 -07:00
Andrew Tridgell 33440567e6 ACM: ArduCopter updates for new compass interface 2012-06-27 16:01:50 +10:00
rmackay9 4aa40bdf10 ArduCopter - setup.pde - changed cli for helicopter to call the new AP_Motors class's parameters instead of the global parameters.
changed init_esc to call the AP_Motor's class's "throttle_pass_through" function.
2012-04-04 23:02:29 +09:00
Andrew Tridgell 7a9b3d3388 Quaternion: show "Quaternion test" on startup if enabled 2012-03-10 10:34:29 +11:00
Andrew Tridgell 12327eb2a9 Heli: fixed some 'used before initialised' warnings 2012-02-19 16:34:43 +11:00
Randy Mackay 232359186e TradHeli - fixed small parameter bug affecting helis. The servo parameters were declared as GSCALAR instead of GGROUP in Parameters.pde.
also renamed heli parameters from _coll_ to the more descriptive _collective_
2012-02-18 20:57:51 +09:00
Jason Short a43ee36bee CH 6 Range setup 2012-02-15 11:47:54 -08:00
Jason Short 73591a0ca5 Added lengthy note about motor testing 2012-02-15 10:49:11 -08:00
Andrew Tridgell d55a0c3a71 added AP_Param::show_all()
this moves the logic into common code
2012-02-13 16:22:52 +11:00
Andrew Tridgell 0f9adbdae0 token size for first()/next() is now 16 bits 2012-02-13 16:22:52 +11:00
Andrew Tridgell 3b4cae3cc3 adapted main ACM code for AP_Param 2012-02-13 16:22:52 +11:00
Pat Hickey 739317276d ArduCopter setup motors: print basic instructions. 2012-02-11 16:05:51 -08:00
Jason Short d1fcebb5ca Cosmetic changes
GPS LED lock waits for home_is_set to be true
2012-01-28 21:19:46 -08:00
Pat Hickey 98a90d0352 ArduCopter: Call motors_output_enable at correct spot during init 2012-01-22 12:03:11 -08:00
Doug Weibel ed9f7cb1b6 Update battery monitoring code for ArduCopter
Fixes compatibility for APM2.  Also a significant update to the battery monitoring code:  We previously had monitoring modes for individual cell voltages for 3 and 4 cell lipos.  These have been removed as they were never really supported (the cell voltages were computed but were not reported or recorded anywhere).  Also, some clean-up/prep work was done for supporting monitoring 2 separate battery packs.  The CLI battery and current monitoring tests were consolidated into 1 test.
changed
2012-01-15 17:10:02 -07:00
Jason Short 6b836d1a09 Fixed Type Error 2012-01-10 23:43:44 -08:00
Pat Hickey 6a4442557c ArduCopter setup.pde: translate from CH_ to MOT_ notation 2012-01-09 21:57:02 -08:00
Randy Mackay bbe6dea980 OptFlow - initial support for APM2 (there are still problems) including adding ability to set Chip Select pin.
Other unrelated changes are:
a) fixed typo in 'esitmate_velocity' to 'estimate_velocity'.
b) moved init_compass from system.pde to sensors.pde which seemed consistent with other sensors.
2011-12-30 12:06:31 +09:00
Jason Short 73a73fbf35 moved some defines around 2011-12-23 14:46:32 -08:00
Andrew Tridgell 483bef35e5 IMU: update ACM and APM for flash_leds change in IMU init 2011-12-13 18:19:41 +11:00
Pat Hickey 8d878a2cae ArduCopter CLI: Add imu.init before imu.init_accel for "level"
* Depending on when you entered the CLI, the imu might not be
  initialized yet, and init_accel would hang.
2011-12-11 15:19:46 -08:00
Randy Mackay 67855b207d Arducopter, RangeFinder - added SONAR_TYPE parameter and properly support the XL (default), LV and long distance XL (aka XLL) sonar types 2011-12-11 16:40:59 +09:00
Jason Short d9347290a4 Added notes to Imu.ax, ay, az 2011-12-10 10:19:20 -08:00
Jason Short 89e014c06a Added alternate alt hold,
New ESC Calibration Routine
2011-11-21 22:12:19 -08:00
Jason Short 8e509b63a7 shortened strings for mem 2011-11-19 14:00:55 -08:00
Jason Short 7dd737ad90 Merge branch 'master' of https://code.google.com/p/ardupilot-mega
Conflicts:
	Tools/autotest/autotest.py
2011-11-12 21:53:08 -08:00
Jason Short ea57fad80c WP counting update 2011-11-12 21:46:03 -08:00
unknown a7038cbaf9 TradHeli - new parameter HSV_MAN to allow better set-up from APMissionPlanner. Also changed swash movement to use radio_out which fixes some setup bugs 2011-11-12 23:23:07 +09:00
Jason Short c8304114a3 renamed some command variables to align with Arduplane
reworked the arming code and moved the DCM gains out.
updated climb_rate to include sonar data.
2011-11-04 21:41:51 -07:00
Jason Short 6a5aefd0ec Added gains to adjust travel of camera. 2011-10-15 16:34:57 -07:00
rmackay9 b5ea05698e TradHeli - added servo averaging to allow support of analog servos
- moved heli parameters to 80 because they were causing flight modes to overlap with waypoints
2011-09-25 16:51:25 +09:00
Jason Short d29cfbcee3 Integration of optical flow
bug fixes for new Simple mode
increased Baro filter by 2 fields
2011-09-15 23:33:00 -07:00
Jason Short 1ce2308d11 Removed Simple Mode
Added Simple option to mode switch positions
removed unused OptFlow code
added reset lat and lon error
removed unused init_auto
Fixed log formatting
Added simple mode bitmask
removed pitchmax
added CLI setup for enabling Simple mode to any switch position
2011-09-14 13:58:18 -07:00
Jason Short 02bfd43390 Fixes Alt hold mistake
Moves tuning into runtime definable param
Added more IMax to throttle

Signed-off-by: Jason Short <jasonshort@gmail.com>
2011-09-10 15:16:51 -07:00
Andrew Tridgell 1456a2a912 renamed top level directories
ArduCopterMega -> ArduCopter
added archives directory for old code
2011-09-09 11:27:41 +10:00