Peter Barker
49c697221a
AP_Mount: make AHRS attitude member variables private
2024-01-14 12:47:47 +11:00
davidsastresas
462eb46c8b
AP_Mount.cpp: send gimbal_manager_status msg when control changes
...
Co-authored-by: Randy Mackay <rmackay9@yahoo.com>
By default we are sending this message at 0.2 Hz. This is totally
fine as no more rate is needed, but whenever control changes it
is interesting to notify as soon as possible, so the rest of the
mavlink network understands the change in control as soon as
possible
2024-01-10 18:26:47 +11:00
Randy Mackay
fa5e58d652
AP_Mount: switch to RC_TARGETING on RC input
2024-01-10 09:48:00 +09:00
Peter Barker
4f4e6d646c
AP_Mount: validate modes before setting them
2023-11-17 11:45:38 +11:00
Andrew Tridgell
8ff2fa4fd9
AP_Mount: added gimbal rates for SIYI
...
this helps diagnose issues with gyro bias versus control when camera
is spinning
2023-11-16 16:57:49 +11:00
olliw42
4ffdb65288
AP_Mount: gimbal_manager_set_pitchyaw is not a command
2023-11-06 08:32:04 +09:00
Asif Khan
eb5ead462b
AP_Mount: add get_poi
...
Co-authored-by: Randy Mackay <rmackay9@yahoo.com>
2023-11-02 15:54:37 +11:00
Peter Barker
d1bcd2c5e1
AP_Mount: allow more libraries to compile with no HAL_GCS_ENABLED
2023-09-05 22:23:51 +10:00
Peter Barker
02d0a07083
AP_Mount: add build options for deprecated messages MOUNT_CONTROL/MOUNT_CONFIGURE
...
these are repalced by the command equivalents
2023-08-29 11:06:13 +10:00
Peter Barker
02d1eca49b
AP_Mount: accept mount commands as command_int
2023-08-24 22:07:12 +10:00
Randy Mackay
9d09739044
AP_Mount: Viewpro supports get rangefinder distance
2023-08-23 18:09:56 +10:00
davidsastresas
55aa1b5a32
AP_Mount: Backend sends gimbal_device_id in device_attitude_status_send
2023-08-10 14:37:30 +09:00
Asif Khan
fd6db1ef45
AP_Mount: add MNT log msg for mount's actual and target angles logging
2023-07-26 17:33:18 +10:00
Peter Barker
c70778e4d4
AP_Mount: correct gimbal manager flags
2023-07-03 08:09:04 +09:00
Randy Mackay
2a30bc7ce1
AP_Mount: add devid parameter and setter
2023-06-27 21:12:20 +10:00
Randy Mackay
39eb46fd26
AP_Mount: backend set_angle_target enforces bf limits
2023-06-13 10:08:02 +10:00
Peter Barker
07160e2985
AP_Mount: move get_bf_yaw to be a method on the object it takes
2023-05-18 15:07:17 +10:00
davidsastresas
cbec7ee47b
AP_Mount: support gimbal_manager_status and do_gimbal_manager_configure
...
Co-authored-by: Randy Mackay <rmackay9@yahoo.com>
2023-05-17 12:38:49 +10:00
Randy Mackay
341910bce4
AP_Mount: fix send_gimbal_manager_information instance
2023-05-17 12:38:49 +10:00
Randy Mackay
ddbc52d2db
AP_Mount: support gimbal-manager-information requests
2023-04-25 15:07:35 +10:00
Asif Khan
47ad614e8e
AP_Mount: Add MNTx_SYSID_DFLT param to easily target another vehicle
2023-04-24 13:34:20 +10:00
Nick Exton
5d39dd45be
AP_Mount: Add clear_roi_target() function
2023-04-11 09:11:08 +10:00
Peter Barker
d6b5dc206e
AP_Mount: make get_attitude_euler non-virtual
...
If a backend ever needs to override this method then we can make it virtual, in the meantime we can save flash by re-using the quaternion getter in the frontend
2023-02-17 10:04:49 +11:00
Randy Mackay
e9b92da241
AP_Mount: add get_attitude_euler
...
this allows external callers including Lua to retrieve the gimbal mount's current attitude
2022-09-28 17:09:31 +10:00
Peter Barker
3d099b0d2f
AP_Mount: include required GCS.h header
2022-09-27 09:26:45 +10:00
Randy Mackay
c20ec27c54
AP_Mount: parameter angles in degrees
...
Also MNTx_RC_RATE param per backend
2022-09-06 13:53:25 +09:00
Randy Mackay
ac769baa3c
AP_Mount: Servo mount's STAB params replaced by BrushlessPWM type
2022-09-06 13:53:25 +09:00
Randy Mackay
0d9526f1c5
AP_Mount: replace RC input params with RC options
2022-09-06 13:53:25 +09:00
Randy Mackay
83c9a76260
AP_Mount: send warning to GCS on invalid GPS or angle targets
...
This hopefully will help catch cases where the GCS relied on a bug in 4.2 (and earlier's) handling of MAV_CMD_DO_MOUNT_CONTROL
2022-08-25 20:28:06 -04:00
Randy Mackay
022d610519
AP_Mount: separate handling of mount-control and do-mount-control
2022-08-25 20:28:06 -04:00
Randy Mackay
119c8b7363
AP_Mount: get_angle_target_to_location checks for valid location
2022-08-24 18:07:08 +10:00
Randy Mackay
b4979e2cfa
AP_Mount: replace send-mount-status with send-gimbal-device-attitude-status
2022-08-15 20:29:25 -04:00
Iampete1
47105f0b03
AP_Mount: params always use set method
2022-08-03 13:43:48 +01:00
Randy Mackay
0d60e47c68
AP_Mount: backend restructure and support for ef/bf angle and rate
2022-06-29 10:56:48 +09:00
Randy Mackay
33a4efa936
AP_Mount: move mode, yaw_lock, roi_target and sysid target to backend
2022-06-29 10:56:48 +09:00
Randy Mackay
ec07c15e1e
AP_Mount: set_roi_target and set_target_sysid lose struct and const before args
2022-06-29 10:56:48 +09:00
Randy Mackay
f426711177
AP_Mount: backend calc_angle_to_xxx requires relative_pan argument
2022-06-29 10:56:48 +09:00
Randy Mackay
3711c362ce
AP_Mount: update_rate_and_angle_from_rc fix arg name to match units
2022-06-29 10:56:48 +09:00
Randy Mackay
10da8a42bd
AP_Mount: replace JSTICK_SPD with RC_RATE
2022-06-21 13:37:11 +09:00
Randy Mackay
8092697c1a
AP_Mount: backend record RC rate targets
2022-06-15 09:07:14 +09:00
Randy Mackay
29a1aed1e3
AP_Mount: backend gets minor comment fix
2022-06-03 19:43:54 +09:00
Randy Mackay
9e8f000ac2
AP_Mount: minor spelling fix
2022-06-03 11:56:18 +09:00
Peter Barker
fcd8d1b5eb
AP_Mount: rename AP_AHRS::get_position to get_location
2022-01-25 10:47:22 +11:00
olliw42
312604f577
AP_Mount: add handle_global_position_int() method to backend and use it + little spelling
2021-10-08 14:22:43 +11:00
Andrew Tridgell
f12a7dd04b
AP_Mount: fixed longitude subtraction
2021-06-25 15:33:55 +10:00
Peter Barker
7b9fbe3b30
AP_Mount: support MAV_MOUNT_MODE_HOME_LOCATION to point at HOME
2020-12-25 12:17:27 +11:00
Andy Piper
f7f5880179
AP_Mount: make mount/gimbal inclusion configurable per-board and disable Solo gimbal on all 1MB boards
2020-08-04 09:18:14 +10:00
Randy Mackay
8ad9a49900
AP_Mount: ignore rc trim when calculating desired mount angles
2020-02-25 17:38:24 +09:00
Peter Barker
7b32f2876e
AP_Mount: change type of roi_target_set to boolean
2019-11-12 07:52:22 +08:00
Peter Barker
c649fd1468
AP_Mount: support sysid targetting
2019-11-12 07:52:22 +08:00