Andrew Tridgell
0266168e69
Plane: removed old elevon and vtail mixers
...
now only use the function based mixing, and auto-convert on startup
2017-08-01 08:25:32 +10:00
Andrew Tridgell
1d626db3b1
Plane: use scaled outputs for AFS failsafe
...
we need to use scaled outputs so that derived outputs (such as elevons
and vtail) have a valid input to use
2017-07-04 07:59:28 +10:00
Peter Barker
38921c4f1a
Plane: correct AFS terminate for rcin/servos split
2017-07-04 07:59:28 +10:00
Andrew Tridgell
d3f9afd4e7
Plane: fixed auto-adjustment of flaperon trim
2017-07-03 11:17:42 +10:00
Andrew Tridgell
2cb511c049
Plane: deprecate old aileron_with_input and elevator_with_input
...
these have very rarely been used and don't work well with new trimming
mechanisms. Now treat them as ordinary ailerons/elevators
2017-07-03 11:17:42 +10:00
Andrew Tridgell
51b39ea3a1
Plane: removed ancient "mix_mode" type elevon mixing
...
this has been deprecated for a long time
2017-07-03 11:17:42 +10:00
Andrew Tridgell
984e887d1d
Plane: changed differential spoilers to scaled outputs
...
this matches new elevon, vtail and flaperon code
2017-07-03 11:17:42 +10:00
Andrew Tridgell
c9e4423997
Plane: re-implement flaperons
...
implement as scaled output instead of PWM output
this will break some peoples setups, but gives much easier setup and
more consistent behaviour
2017-07-03 11:17:42 +10:00
Mark Whitehorn
dc10675965
ArduPlane: suppress differential thrust when throttle is zero
...
this prevents motors from spinning when disarming in FBWA
2017-04-28 16:08:50 -07:00
Andrew Tridgell
be1b50d6e2
Plane: support auto trim for separate elevon and vtail channels
...
this supports SERVO_AUTO_TRIM=1 for elevons and vtails setup using the
new separate functions
2017-04-24 16:26:08 +10:00
Andrew Tridgell
b4ffcfa6bd
Plane: added support for elevon and vtail servo functions
...
these make trimming and limiting servo movement easier
2017-04-24 16:26:08 +10:00
Tom Pittenger
5b47927937
Plane: pre-launch flaps incorrectly always disabled
...
Pre-launch flaps are always disabled by checking current state against zero (which it always will be) instead of the param which is what it was supposed to be checking.
2017-04-18 14:40:17 -07:00
Mark Whitehorn
7679b758b0
Plane: add parameter RUDD_DT_GAIN for dual motor tailsitter
...
controls rudder to differential thrust mixing in FW mode
2017-04-06 08:29:44 +10:00
Andrey Kolobov
35d406aeab
Plane: added a soaring controller to Arduplane
2017-03-14 08:53:10 +11:00
Michael du Breuil
cf10b7b841
Plane: Add support for landing PID's and servo control
2017-03-02 12:38:59 +11:00
Michael du Breuil
1bb806edb2
Plane: Use new landing interfaces
2017-03-02 12:38:59 +11:00
Andrew Tridgell
b3380ecfa7
Plane: support twin-engine planes
...
with differential thrust for yaw
2017-02-18 17:26:43 +11:00
Andrew Tridgell
83f3cee99e
Plane: initial hooks for tailsitter support
2017-02-18 17:26:43 +11:00
Michael du Breuil
29b16dbafd
Plane: Refactor to request relative altitudes from AHRS
...
Removes the need for plane to do the math for finding the relative height.
Also caches the value at the same time we update current_loc, which is a
non behaviour change as that was the only time you could see a change in
the relative height propegate through the system anyways
2017-02-13 09:23:14 +11:00
Tom Pittenger
61bc0a6206
Plane: check stage==LAND instead of landing.in_progress
2017-01-26 13:11:44 -08:00
Tom Pittenger
e709705ab8
Plane: describe flight stages without using specific stage name
2017-01-26 13:11:43 -08:00
Andrew Tridgell
6b4e5304cf
Plane: fixed mixer outputs
2017-01-12 17:39:37 +11:00
Andrew Tridgell
1879eddfa0
Plane: adjust for limit_slew_rate API change
2017-01-12 17:39:37 +11:00
Andrew Tridgell
b83f50be0f
Plane: use new SRV_Channels API
2017-01-12 17:39:37 +11:00
Tom Pittenger
063f517424
Plane, TECS, AP_Landing: rename stage LAND_ABORT to ABORT_LAND
...
this will reduce confusion when searching for FLIGHT_LAND_* and you get a bunch of takeoff related hits. It will also make more sense when the landing library fully manages the FLIGHT_LAND stage entirely because it will not mange FLIGHT_LAND_ABORT
2016-12-30 23:50:03 -08:00
Tom Pittenger
04f32b6ec6
Plane: simplify flight stage landing check to use landing.in_progress
2016-12-30 23:50:03 -08:00
Tom Pittenger
c286ceba43
Plane: move enum FlightStages to AP_Vehicle::FixedWing
2016-12-30 23:50:03 -08:00
Tom Pittenger
b7b56b94a3
Plane: convert landing.complete to landing.is_complete()
2016-12-14 04:32:30 -08:00
Andrew Tridgell
1e691cdefc
Plane: fixed build
2016-12-05 16:51:49 -08:00
Tom Pittenger
ac1dced3bf
Plane: set landing params as private and use accessors
2016-11-25 19:07:30 -08:00
Tom Pittenger
896b931a7c
Plane: Move auto_state variables to AP_landing members
2016-11-25 19:07:30 -08:00
murata
ab99ea54eb
Plane: To nullptr from NULL.
2016-10-29 10:32:05 -03:00
Mathieu OTHACEHE
152edf7189
Global: remove mode line from headers
...
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
2016-10-24 09:42:01 -02:00
Ricardo de Almeida Gonzaga
3d1db89655
ArduPlane: Fix typos
2016-10-20 08:14:37 -07:00
Andrew Tridgell
15d6c77087
Plane: fixed vtail rudder only planes
2016-10-20 17:49:05 +11:00
William Liu
8a64106faa
Plane: return false when throttle is not suppressed
2016-10-17 09:50:25 +11:00
Andrew Tridgell
5724aef8b3
Plane: support automatic servo trimming
...
now that we have separated RC input from servo output with
SERVO_RNG_ENABLE=1 we can do full automatic servo trimming as an
option
2016-10-16 15:20:47 +11:00
Andrew Tridgell
70375720f3
Plane: fixed throttle slew handling with SERVO_RNG_ENABLE=1
2016-10-15 21:42:39 +11:00
Andrew Tridgell
be1109174e
Plane: apply elevon and vtail mixers after SRV_Channel remap
...
this is needed to ensure that changes in RCn_MIN/MAX don't cause
changes in the output handling for elevon nd vtail planes
2016-10-15 16:59:36 +11:00
Andrew Tridgell
d49f50db4b
Plane: don't output aux channels on termination
2016-10-15 16:59:36 +11:00
Andrew Tridgell
a23c373f16
Plane: fixed servo mixing for AFS and failsafe case
2016-10-15 16:59:35 +11:00
Andrew Tridgell
8170df7ba8
Plane: added servo remapping object
2016-10-15 16:59:35 +11:00
Andrew Tridgell
c7f738c284
Plane: separate out the output channel mixing
...
this provides a framework for other output mixing types
2016-10-15 16:59:35 +11:00
Andrew Tridgell
eb67c97bb2
Plane: split out flap output functions
2016-10-15 16:59:34 +11:00
Andrew Tridgell
a2cdd75870
Plane: removed THROTTLE_OUT define
...
this can be achieved with THR_MAX parameter instead
2016-10-15 16:59:34 +11:00
Andrew Tridgell
40c6ebf61a
Plane: refactor more of servos output code to be easier to read
2016-10-15 16:59:34 +11:00
Andrew Tridgell
6aa3ded666
Plane: split main servo output functions into a separate file
2016-10-15 16:59:34 +11:00