efc4584e92
moved back navigation into original loop - was for debugging
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2280 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-15 03:00:05 +00:00
995d5325d1
Moved motors to individual files.
...
updated motor setup test to be sequencial pulses of the motors in CW order.
Fixed Mission scripting logic
fixed Free yaw error in neutral throttle
fixed D term issue with Baro hold - was too high
incremented firmware revision, removed frame var
removed setup show from startup
removed unused EEPROM functions
fixed broken demo mission
fixed non working loiter with delay
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2275 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-15 02:02:09 +00:00
4a7b4ac3b4
moved rudder servo control out of 200hz loop to test if it will reduce servo noise.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2260 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-14 04:45:28 +00:00
12357746a9
better Baro hold - Baro_KD was way too high.
...
Clean up with WP processing
moved crosstrack call to more logical location
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2259 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-14 04:30:42 +00:00
9780ee69d9
Slight increase to loop speed - for Max
...
removed throttle integrator until I have more time to deal with the data
tweaked control loops to be more like RC1 for Max to try. They fly great BTW
tweaked config to be more better.
Mavlink - only cosmetic tweaks
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2254 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-13 19:29:45 +00:00
57338c488a
Fix wp altitude issues
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2244 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-11 11:55:13 +00:00
5fbced7187
remove hil message in non hil mode
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2240 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-10 10:26:32 +00:00
7d43ce5159
Camera stabilization, Mavlink updates
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2238 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-10 00:00:05 +00:00
5c4bab3941
Mavlink Sync with APM
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2235 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-09 17:40:32 +00:00
2251db1b7c
Added APM's current sensing.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2234 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-09 15:46:56 +00:00
884bb4f103
AC2 - Mavlink on 2 ports
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2233 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-09 12:20:22 +00:00
17acfca526
re-org'ed the logs
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2231 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-09 04:16:58 +00:00
cce3dd73bb
Added compass fix from APM
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2222 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-08 18:32:33 +00:00
6f0a639898
Final changes for Beta release
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2180 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-07 19:41:55 +00:00
b70c08d417
minor cleanup based on compiler warnings.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2122 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-07 00:21:16 +00:00
a4596e5bdb
increased to 160hz
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2043 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-02 04:34:15 +00:00
b6b42f7b86
removed the !!! from ACM to keep the 2650 happy.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2036 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-02 04:13:27 +00:00
51d918dda7
Added throttle_integrator
...
Removed cos for nav_rate testing.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1934 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-30 16:01:57 +00:00
1aabb8c395
added baro_alt_offset back in. Filtering out the effect over time.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1925 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-28 05:43:35 +00:00
cf4b603315
refinements to nav
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1922 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-27 05:08:24 +00:00
93a7a76c9b
Loiter should work now.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1921 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-26 05:15:25 +00:00
7e843ee679
Warning!!! The recent build 1919 was tagged as sparkfun.
...
The trunk is unstable, so please be careful. I've made a lot of changes based on the Sparkfun challange. Most include how we handle things like altitude, but the mission scripting has also been updated as well.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1920 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-25 05:12:59 +00:00
9aaba3fd0f
Navigation bug fixes, tuning.
...
better handling of sonar at angles and baro mixing. - optimized for flats.
Crosstrack test bug found and fixed.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1916 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-21 23:07:31 +00:00
0c61e9dd79
Lots of little things. Yaw control is updated based on Jani's logs. Thanks!
...
Takeoff now works well.
better logging.
tuned down kD for Yaw - was causing some bad behavior.
Auto mission now resets when entering mode.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1914 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-21 05:15:45 +00:00
4cbbeb4860
Minor Yaw update, Log adjustment,
...
Main loop slightly faster at 125 hz
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1912 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-20 06:44:49 +00:00
1b947f5d9e
Yaw fix,
...
Logs updated to do better Yaw Debugging
Landing is now rate limited
updated command desctiption.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1911 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-20 05:37:05 +00:00
d858951e91
Added delay option for WP_NAV. The copter will LOITER in seconds based on p1 value.
...
This turned out to be functionally identical to LOITER_TIME so I combined them.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1909 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-18 16:27:03 +00:00
f652c5ae91
Added float for CH6_Y6_SCALING value.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1903 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-17 23:12:27 +00:00
0063c8e60d
Added rudimentary tuning with CH6. Assign this to your Flaps knob on your radio. in APM_config.h set your desired option, then upload. The knob will adjust the value in real time. Enter the CLI and run test, tune to see the output value.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1902 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-17 23:08:16 +00:00
87812c9eec
Reworking Yaw some more. Yaw is testing really well with this version.
...
I have moved Pitch_Max to a different part of the code. It was limiting SIMPLE mode which was bad. Now it only limits in Auto modes, RTL, LOITER, etc.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1899 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-17 05:17:42 +00:00
5fb1079952
Better CTUN Logging
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1892 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-16 20:42:00 +00:00
ede4dcd774
Log fix
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1889 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-16 08:27:25 +00:00
dc615e6320
Logging fix's
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1888 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-16 07:36:22 +00:00
2f74adc24e
ACM mavlink update/log fix
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1881 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-15 13:24:05 +00:00
f6783454d7
Removed all calls to legacy trim_radio(). Handled by radio setup.
...
Added AP_Var Fingerprint checker. Will not let users fly with OOD firmware.
Tweaked Yaw to give better response. Let me know how it goes. It looks fine, but I've not flown it.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1878 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-14 05:56:39 +00:00
21980216b9
Altitude control fix - trying to go higher would make alt hold reset to 0
...
Yaw fix,
improved PID defaults
potential logging fix
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1877 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-13 16:33:06 +00:00
16be234b70
commented out debugger code
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1872 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-10 23:20:22 +00:00
860adeb812
added a limit to throttle_input = 800 for stability insurance
...
found an odd bug in SIMPLE mode that broke LOITER mode. Fixed
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1871 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-10 23:07:24 +00:00
985a4e7f61
removed the throttle min max settings for user config.
...
turned off altitude interpolation for now.
removed the "Dampener" setting in config. Using less confusing kD instead.
removed throttle_cruise reset in events.pde for RTL - would cause a crash.
added I term for pitch/roll for when flying greater than 20°
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1868 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-10 20:31:33 +00:00
86383894fa
added minimum of 1 meter to alt hold
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1859 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-09 17:48:03 +00:00
c3737db26c
added better value for Sonar minimal value for landing
...
removed FBW mode - no longer needed
added set_throttle_cruise_flag to auto set the throttle value for alt hold
added altitude minimum option for waypoints
added support for relative WPs
added support for Yaw tracking per WP in options bitmask
lowered default sonar kD value
increased minimal value to set the throttle cruise value with CH7 switch
updated README.txt
added additional stock test missions available in CLI
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1856 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-08 19:13:31 +00:00
7b26ec8463
updated test mission. It now passes the tests. Be sure to verify things are working well before flying.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1843 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-03 21:11:14 +00:00
b36508eb7f
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1840 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-03 04:44:00 +00:00
3494e73f8b
minor change to GPS
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1834 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-02 19:56:35 +00:00
defb811eaa
Added interactive control for altitude in Loiter (position hold) and Altitude hold (mostly just used for testing).
...
Throttle down = descend, throttle high = ascend.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1831 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-30 05:27:13 +00:00
e34969066f
Hopefully this fixes the GPS init bug.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1830 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-30 04:24:20 +00:00
c7621f92b0
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1824 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-28 05:18:10 +00:00
11d71e77c8
GPS is disabled in this version to debug some bad behavior. If it doesn't stabilize well. Let me know.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1823 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-28 04:12:19 +00:00
4e39571d9c
implementing yaw tracking.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1821 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-27 21:26:34 +00:00
606f46131e
Better implementation of the GPS sensing.
...
You must now be on the ground and before you cant set the initial angle for Simple mode.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1819 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-27 06:24:53 +00:00
jasonshort
mich146@hotmail.com