Andrew Tridgell
7b4e4889c7
AP_Periph: use generated decoder for FW update and actuators
2023-04-10 14:46:54 +10:00
Andrew Tridgell
119b0b15f1
AP_Periph: cope with mixed bxCAN and CANFD packets
...
this allows for runtime switching of CANFD enable, while supporting
incoming bxCAN packets in CANFD mode
2023-04-10 14:46:54 +10:00
Peter Barker
7995bc5175
Tools: add and use option to compile SLCAN support out of code
2023-03-15 19:08:09 +11:00
Andrew Tridgell
2781f65d56
AP_Periph: limit peripheral mag to 25Hz by default
...
we only read mag on the vehicles at 10Hz. Some magnetometers were
reporting data at 500Hz (see MMC5xx3 driver)
by sampling more slowly the data is accumulated and averaged on the
node which saves a lot of bandwidth
2023-03-06 17:24:29 -08:00
Andrew Tridgell
d3bf7fc946
AP_Periph: rename CAN_PROBE_CONTINUOUS to AP_PERIPH_PROBE_CONTINUOUS
2023-03-06 19:48:07 +11:00
Tom Pittenger
223b91f6b4
Periph: fix sending GPS Heading packet at correct interval
2023-02-25 03:23:07 -08:00
rishabsingh3003
32a0c8935e
AP_Periph: Fix hwesc telem temp units
2023-02-22 07:12:47 +11:00
Iampete1
cb6891821e
AP_Periph: always call airspeed init to allow param conversion
2023-01-03 10:17:56 +11:00
Andrew Tridgell
69cb6796f3
AP_Periph: send GNSS Heading message
...
if not sending RelPosHeading then send Heading message if we have yaw
2022-12-20 10:23:58 +11:00
Andrew Tridgell
dcab2d2f2a
AP_Periph: cope with GPS without yaw accuracy
2022-12-20 10:23:58 +11:00
rishabsingh3003
27f55ae626
AP_Periph: Add proximity support
2022-12-15 07:20:05 +11:00
James O'Shannessy
4679cb4265
AP_Periph: Add timeout to ESC driving when CAN packets are lost
...
Fixes a periph continuing to drive an ESC to an output when the esc_rawcommand packets are lost
2022-12-03 13:55:01 +11:00
Tom Pittenger
4e94046a4a
AP_Periph: can_printf() to send longer strings using multiple packets
2022-10-23 21:47:42 -07:00
Tom Pittenger
3f4755ea7b
AP_Periph: add support for AP_TemperatureSensor
2022-10-18 10:05:31 +11:00
Tom Pittenger
53e0c4175e
AP_Periph: add support for SLCAN
2022-10-11 11:26:40 +11:00
Peter Barker
3cbd018877
AP_Periph: correct build for EFI can
...
no longer an array
2022-10-05 18:03:59 +11:00
Andrew Tridgell
aa757501f4
AP_Periph: removed the old DroneCAN Fix message
...
only send/process Fix2 message, saving bus bandwidth and flash space
2022-09-28 17:27:32 +10:00
Andrew Tridgell
31cac4395f
AP_Periph: support actuator type with PWM
...
this makes debugging much easier in CAN analyser
2022-09-13 16:23:44 +10:00
bugobliterator
939bd94796
AP_Periph: make constants used in bitshift unisigned
2022-09-08 13:37:55 +10:00
bugobliterator
3e8355638b
AP_Periph: add support for redundant CAN bus
2022-09-08 13:37:55 +10:00
Andrew Tridgell
a92cb1017e
AP_Periph: report unsigned bootloader flash attempt
2022-09-05 12:35:37 +10:00
Andrew Tridgell
a4fa99c96c
AP_Periph: fixed undulation in Fix2 pkt
2022-08-28 11:43:01 +10:00
Andrew Tridgell
2637f87409
AP_Periph: ensure we don't send inf in Fix and Fix2 for GPS
2022-08-28 11:43:01 +10:00
Andrew Tridgell
2f3fe19aca
AP_Periph: use AP_CheckFirmware
2022-08-15 09:18:34 +10:00
Andrew Tridgell
cc2589777f
AP_Periph: pass correct WGS84 height on GPS peripherals
2022-08-10 05:04:18 +10:00
bugobliterator
c4b182978a
AP_Periph: add support for starting sitl periph in maintenance mode
2022-07-27 18:18:03 +10:00
bugobliterator
cdb14bd75d
AP_Periph: enlarge CANARD pool for CANFD messages
2022-07-27 18:18:03 +10:00
Andrew Tridgell
5a36d7cf0a
AP_Periph: fixed non-contiguous mask for ESC telem output
...
this fixes the case where a peripheral node has an ESCs that are not
starting at the first channel. Reported here:
https://discuss.ardupilot.org/t/using-matekl431-adapters-for-pwm-and-dshot/85781/22
tested on MatekL431-Periph
2022-06-15 18:16:22 +10:00
Andrew Tridgell
f728894eec
AP_Periph: added EFI support
2022-06-09 21:10:37 +10:00
Andrew Tridgell
25d231187f
AP_Periph: added RNGFND_MAX_RATE parameter
...
prevent duplicate samples and allow setting of maximum rate we sample
rangefinder
2022-06-09 16:51:56 +10:00
Andrew Tridgell
227e82053a
AP_Periph: fixed GPS dropout on F4 and L4 GPS nodes
...
we need more time for other threads on these nodes or we will end up dropping GPS frames
2022-04-18 14:40:53 +10:00
bugobliterator
29673de4f3
AP_Periph: add parameters for setting up FD Bitrates
2022-03-11 18:13:54 +11:00
Siddharth Purohit
8a8de73d89
AP_Periph: add support for CANFD trx
2022-03-11 18:13:54 +11:00
Andrew Tridgell
94d02faf37
AP_Periph: fixed build for include changes
2022-02-22 12:13:19 +11:00
bugobliterator
9469817e03
AP_Periph: send epoch time for both message and GNSS timestamp
2022-01-20 17:26:35 +11:00
Joshua Henderson
92aff3bded
AP_Periph: use airspeed.set_log_bit()
2022-01-19 18:21:32 +11:00
Peter Barker
ef11400e13
Tools: make C_TO_KELVIN a function macro; create KELVIN_TO_C
...
These are in celsius
2022-01-13 18:31:46 +11:00
Andrew Tridgell
d62e946d48
AP_Periph: fixed temperature reporting
...
more common to have ESC temp than motor temp, so report ESC
temperature
2021-12-28 16:30:14 +11:00
Andrew Tridgell
d239bf99bd
AP_Periph: enable use of AP_ESC_Telem in peripheral nodes
...
give ESC status packets back for RPM, voltage, current etc
2021-12-10 08:11:24 -08:00
bugobliterator
4e067a68e2
AP_Periph: move to using dronecan instead of uavcan
2021-11-24 18:30:47 +11:00
bugobliterator
f74550bce5
AP_Periph: update notify state decode to use current dsdlc code
2021-10-14 20:13:06 +11:00
bugobliterator
6b44bc3e4c
AP_Periph: use methods from new canard dsdl generator
2021-10-14 20:13:06 +11:00
bugobliterator
8a4b9c2b36
AP_Periph: add support for handling Notify State message
2021-09-30 08:52:27 +10:00
Pierre Kancir
6e9ea663e5
AP_Periph: temp fix for -Wcast-align until we fix the generator
2021-09-29 17:27:29 +10:00
Willian Galvani
901164a317
AP_Periph: update to use capacity_remaining_pct() as a bool
2021-09-08 17:17:41 +10:00
Andrew Tridgell
6e33910c25
AP_Periph: use a longer loop delay on non-H7
...
the short delay broke the F412 based CUAV_GPS
2021-09-02 21:56:03 +10:00
bugobliterator
90c9fb7804
AP_Periph: manage separate transfer ids for different transfer desc
2021-08-19 14:20:58 +10:00
bugobliterator
bb65ab83be
AP_Periph: reduce Rx latency by reading while sitting in delay
2021-08-19 14:20:58 +10:00
bugobliterator
aa9a40acf5
AP_Periph: add a way to transmit MovingBaseline Data on another port
2021-08-19 14:20:58 +10:00
bugobliterator
54f03b9b64
AP_Periph: add support for moving baseline heading
2021-08-19 14:20:58 +10:00