Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
61,868 Commits 70 Branches 507 Tags 620 MiB
Commit Graph

61868 Commits

Author SHA1 Message Date
Randy Mackay 2d8c7f0efa Copter: 4.5.0-beta1 release notes 2024-01-31 10:00:14 +09:00
Randy Mackay 9b0602cc1e Rover: 4.5.0-beta1 release notes 2024-01-31 10:00:11 +09:00
Andrew Tridgell 629cb92642 Plane: mark master as 4.6.0 dev 2024-01-31 10:42:38 +11:00
Randy Mackay d70ff4db75 Plane: 4.5.0-beta1 release notes 2024-01-31 10:05:08 +11:00
Andrew Tridgell 30497244d9 HAL_ChibiOS: whitespace fixes 2024-01-30 12:32:23 +11:00
Andrew Tridgell 0a6057f2b3 HAL_ChibiOS: adjust clocks for H723 and H730 
FDCAN clock must be 80MHz, and also align no-crystal clocks with
clocks for boards with crystals
 2024-01-30 12:32:23 +11:00
Andrew Tridgell aea2863141 hwdef: Added BotBloxSwitch 2024-01-30 12:32:23 +11:00
Andrew Tridgell 1be9c79e35 AP_Networking: fixed network bootloader without serial manager 2024-01-30 12:32:23 +11:00
Andrew Tridgell 967af533b9 HAL_ChibiOS: fixed flash page count on H723 
single bank H7 has 8 pages
 2024-01-30 12:32:23 +11:00
Andrew Tridgell 4eaf5ef247 HAL_ChibiOS: support STM32H723 boards 2024-01-30 12:32:23 +11:00
Andrew Tridgell 4e8cc6d5ab AP_Bootloader: fixed ECC check for single bank H7 2024-01-30 12:32:23 +11:00
Peter Barker 3b1ec57f54 Tracker: move AP_Stats to AP_vehicle 2024-01-30 11:12:21 +11:00
Peter Barker 2761a528f3 SITL: remove unused include of AP_Stats.h 2024-01-30 11:12:21 +11:00
Peter Barker 0a5b6c7797 Blimp: move AP_Stats to AP_vehicle 2024-01-30 11:12:21 +11:00
Peter Barker e4cf674891 Rover: move AP_Stats to AP_vehicle 2024-01-30 11:12:21 +11:00
Peter Barker 81231997ff Sub: move AP_Stats to AP_vehicle 2024-01-30 11:12:21 +11:00
Peter Barker 0bc2c15485 Plane: move AP_Stats to AP_vehicle 2024-01-30 11:12:21 +11:00
Peter Barker eab70e3a1e ArduCopter: move AP_Stats to AP_Vehicle 2024-01-30 11:12:21 +11:00
Peter Barker 652d2ec198 AP_Vehicle: move AP_Stats to AP_Vehicle 2024-01-30 11:12:21 +11:00
Iampete1 c84e5b337e Plane: move forward throttle output in VTOL modes to QuadPlane update 2024-01-30 11:06:09 +11:00
Henry Wurzburg 3973c28f15 Plane:add TKOFF_TIMEOUT to MODE TAKEOFF 2024-01-30 11:02:53 +11:00
Iampete1 4bcbb13f79 AP_TemperatureSensor: add DroneCAN backend 2024-01-30 10:13:35 +11:00
Iampete1 5fd3be1b75 AP_DroneCAN: add subscribe msgs for TemperatureSensor 2024-01-30 10:13:35 +11:00
Gone4Dirt 26bfedb956 AP_Periph: Send generic equipment temperature data 2024-01-30 10:13:35 +11:00
Gone4Dirt 6e4ce35fca AP_Temperature: Add DroneCAN source 2024-01-30 10:13:35 +11:00
Andrew Tridgell e772012e01 HAL_ChibiOS: raise SDMMC clock limit on H7 
this allows for faster log download on ethernet
 2024-01-29 06:51:11 +11:00
TsuyoshiKawamura 8914e5585f AP_BattMonitor: delete unnecessary underscore in description 2024-01-28 22:29:06 +11:00
Andrew Tridgell fd40b15e21 AP_Bootloader: added MatekH7A3 board type 2024-01-28 09:00:30 +11:00
Andrew Tridgell f1566a481e AP_Bootloader: added board ID for BotBloxSwitch 2024-01-28 09:00:19 +11:00
Andrew Tridgell e039ff2a30 AP_Param: don't enable param backup on all boards 
this fixes an issue with resetting of parameters when going between
4.4.x and 4.5.x on MatekH743, and on any other board using flash
storage where the storage size has increased from 16k to 32k between
4.4.x and 4.5.x

The problem is that when you update to 4.5.x the parameter code stored
a backup of parameters in the StorageParamBak storage region which is
in the last section of storage. When you downgrade to 4.4.x the
AP_FlashStorage::load_sector() code tries to load this data and gets
an error as it is beyond the end of the available 16k storage. This
triggers an erase_all() and loss of parameters
 2024-01-28 08:42:57 +11:00
Leonardo Garcia 13266ea1f3 Tools: Allocate ID for mRo KitCAN revC board 2024-01-27 10:33:50 +11:00
Andrew Tridgell a2707b48c5 HAL_ChibiOS: enable clock management on G4 
this allows for a different clock tree in the main fw from the
bootloader
 2024-01-25 11:44:02 +11:00
Andrew Tridgell 743b1262a0 waf: removed old UAVCAN defines 2024-01-25 11:44:02 +11:00
Andrew Tridgell 2d031a4d20 HAL_ChibiOS: switched G4 FDCAN clock to 80MHz 
this requires main CPU clock at 160 MHz instead of 168 MHz
 2024-01-25 11:44:02 +11:00
Andrew Tridgell 1c8048df8f HAL_ChibiOS: fixed CANFD timings 
our CANFD timings were resulting in a lot of busoff errors. Here is an
example of master at 1Mbit/5MBit:

Getting @SYS/can0_stats.txt as -
------- Clock Config -------
CAN_CLK_FREQ:   80MHz
Std Timings: bitrate=1000000 presc=7
sjw=0 bs1=7 bs2=0 sample_point=90.00000%
FD Timings:  bitrate=5000000 presc=1
sjw=0 bs1=5 bs2=0 sample_point=90.00000%
------- CAN Interface Stats -------
tx_requests:    2689
tx_rejected:    0
tx_overflow:    443
tx_success:     7
tx_timedout:    2232
tx_abort:       0
rx_received:    18470
rx_overflow:    0
rx_errors:      0
num_busoff_err: 34439
num_events:     18477
ECR:            F8
fdf_rx:         18467
fdf_tx_req:     2182
fdf_tx:         0

here is an example with the new timings:

------- Clock Config -------
CAN_CLK_FREQ:   80MHz
Std Timings: bitrate=1000000 presc=8
sjw=1 bs1=8 bs2=1 sample_point=90.00000%
FD Timings:  bitrate=8000000 presc=2
sjw=3 bs1=8 bs2=3 sample_point=80.00000%
------- CAN Interface Stats -------
tx_requests:    3023
tx_rejected:    0
tx_overflow:    0
tx_success:     3023
tx_timedout:    0
tx_abort:       0
rx_received:    27865
rx_overflow:    0
rx_errors:      0
num_busoff_err: 0
num_events:     30888
ECR:            0
fdf_rx:         27862
fdf_tx_req:     3016
fdf_tx:         3016

I am testing between a CubeOrange and a Pixhawk6X. I tested 1, 2, 4, 5
and 8 MBit (which are the only valid FD bitrates in our parameters)

Many thanks to Kai from Salient Motion for finding this issue and
providing the corrected timing table
 2024-01-25 11:44:02 +11:00
Thomas Watson 52468f0238 AP_ROMFS: fix buffer null terminator 
Ensure buffer is properly null terminated without changing the indicated
size even for uncompressed data.
 2024-01-25 11:24:31 +11:00
Thomas Watson d13193150c AP_ROMFS: store size in file structure instead of compressed stream 
Cleans up code.
 2024-01-25 11:24:31 +11:00
Thomas Watson d46cb3fd85 AP_ROMFS: embed raw DEFLATE streams 
Saves size not including unnecessary headers or code to parse them.
 2024-01-25 11:24:31 +11:00
Thomas Watson 5d37442f7c Tools/embed: drop py2 compat, necessary for future improvements 2024-01-25 11:24:31 +11:00
Iampete1 8c72304ab9 AC_Avoidance: AP_OADijkstra: correct use of uninitialised value when retrying fence 2024-01-24 19:20:02 +11:00
Peter Barker c33d665906 GCS_MAVLink: make rally/fence item conversion methods public 2024-01-24 19:14:41 +11:00
Peter Barker 3ef2139f4b AP_FileSystem: permit upload of fence/rally via ftp 2024-01-24 19:14:41 +11:00
Peter Barker 127961e692 Plane: break out a method for set-attitude-target 2024-01-24 19:10:35 +11:00
Peter Barker f96add13e9 Plane: break out a method for set-position-target-local-ned 2024-01-24 19:10:35 +11:00
Peter Barker 5bc2b1a09b Plane: break out a method for set-position-target-global-int 2024-01-24 19:10:35 +11:00
Simon Hancock 1bfd9f3763 AP_Logger: Correct for loop condition 2024-01-24 19:09:55 +11:00
Peter Barker 75dec6fcc7 Rover: handle RADIO_STATUS is GCS base class 2024-01-24 18:43:15 +11:00
Peter Barker 81b279758d Blimp: handle RADIO_STATUS is GCS base class 2024-01-24 18:43:15 +11:00
Peter Barker 57535b538e ArduPlane: handle RADIO_STATUS is GCS base class 2024-01-24 18:43:15 +11:00
Peter Barker 4c2cc511e6 ArduCopter: handle RADIO_STATUS is GCS base class 2024-01-24 18:43:15 +11:00