Commit Graph

757 Commits

Author SHA1 Message Date
muramura 9e28bec87a AP_NavEKF3: use UINT8_MAX as flag value in place of 255 2024-09-13 09:17:17 +10:00
Tatsuya Yamaguchi 83c544f792 AP_NavEKF3: use SourceSetSelection enum class 2024-09-08 10:02:29 +10:00
Peter Barker 33f9513854 AP_NavEKF3: correct includes 2024-09-06 08:52:01 +10:00
George Zogopoulos 18e95c7979 Revert "AP_NavEKF3: Corrected logged units"
This reverts commit 1f01f75036.
2024-09-06 08:46:11 +10:00
Peter Barker 6cfecaa86d AP_NavEKF3: use enum class for DAL MemoryType 2024-09-04 09:51:08 +10:00
Peter Barker e8f361458e AP_NavEKF3: rename gpsVelInnovTime_ms to gpsRetrieveTime_ms
in preparation for using this for other things
2024-09-03 10:34:02 +10:00
Peter Barker 2a6b45f4d9 AP_NavEKF3: tidy formatting of is_deadreckoning 2024-09-03 10:34:02 +10:00
Peter Barker 4782ace3b9 AP_NavEKF3: rename lastPosPassTime_ms to lastGpsPosPassTime_ms 2024-09-03 10:34:02 +10:00
Peter Barker a51614f360 AP_NavEKF3: use reference for dal in frontend
in place of method calls
2024-09-03 10:16:59 +10:00
Peter Barker 02c6784c11 AP_NavEKF3: add and use pr/EK3_FEATURE_OPTFLOW_FUSION 2024-09-02 11:53:12 +10:00
Peter Barker 4e27c51aa1 AP_NavEKF3: do not log DefaultAirspeed if logging not started
if we are not going to use this value ourselves then we certainly should not add it to the replay log
2024-08-27 10:15:10 +10:00
George Zogopoulos 1f01f75036 AP_NavEKF3: Corrected logged units 2024-08-07 17:02:28 +10:00
Paul Riseborough 4904c718a5 AP_NavEKF3: Fix yaw alignment bug
When the  yaw is aligned to the GPS yaw, the recordYawResetsCompleted() function should be called the same as for any other yaw reset.
2024-07-25 09:34:48 +10:00
Clyde McQueen 630d3fa8a7 AP_NavEKF3: log mag fusion selection to XKFS 2024-07-11 16:16:27 +10:00
Peter Barker c8a20726ff AP_NavEKF3: do not store prediction-enabled as state
this is only used in one place, and that place is called from the same routine setting the persistent state.  The only other place which calls readIMUData shouldn't be running the prediction step, but mmay, depending on the previous setting of the prediction step.

We are not initialising this state on filter reset, so it's possible that the state will be set when we do an InitialiseFilterBootstrap, which is probably not desired
2024-07-09 10:45:03 +10:00
Peter Barker ce48932f4d AP_NavEKF3: remove storedRange member variable if rangefinder measurements disabled 2024-07-04 19:21:44 +10:00
Willian Galvani cb74ebbddd EKF3: allow earth-frame fields to be estimated with an origin but no GPS 2024-07-03 16:49:27 +10:00
Peter Barker 13e7d04497 AP_NavEKF3: make AP_RANGEFINDER_ENABLED remove more code 2024-07-02 09:17:26 +10:00
Peter Barker 563c3e7c62 AP_NavEKF3: rename ins get_primary_accel to get_first_usable_accel 2024-06-26 17:12:12 +10:00
Clyde McQueen 0e6543f0e4 AP_NavEKF3: sub update for yaw reset and inFlight checks
on sub, request final yaw reset after diving 0.5m.
Also update rangefinder tests for sub
2024-06-25 18:09:37 +10:00
Paul Riseborough 61874da020 AP_NavEKF3: Rework method of synthesising airspeed for dead reckoning
The previous method resulted in data incest and fusion of predicted airspeed on every EKF internal time step.
This was not apparent during flight where the vehicle was turning, but during long straight legs did not constrain along track drift.
2024-06-09 14:25:02 +10:00
Paul Riseborough 720c2da807 AP_NavEKF3: Rework GPS jamming resiliency
Make it user selectable.
Remove potential for a race condition between decisions based on latest data and the EKF fusion processing which operates on a delayed time horizon. This is achieved by preventing data entering the buffer if awaiting checks to pass ensuring that no EKF fusion time horizon processes can use data that hasn't passed checks.
Log the waitingForGpsChecks class variable
2024-06-09 14:25:02 +10:00
Paul Riseborough 996bf7d4df AP_NavEKF3: Log gpsGoodToAlign 2024-06-09 14:25:02 +10:00
Paul Riseborough eb2ff2192d AP_NavEKF3: Don't block no compass planes from running GPS alignment checks 2024-06-09 14:25:02 +10:00
Paul Riseborough 6baeb1cd9d AP_NavEKF3: Fix bug causing in flight yaw align to not complete 2024-06-09 14:25:02 +10:00
Paul Riseborough ffde7f815c AP_NavEKF3: Allow wind to relearn rapidly when GPS is re-enabled 2024-06-09 14:25:02 +10:00
Paul Riseborough 87bf8d9997 AP_NavEKF3: Treat wind as truth when deadreckoning with no airspeed sensor 2024-06-09 14:25:02 +10:00
Paul Riseborough 568972c0f0 AP_NavEKF3: Fix bug preventing use of default or synthetic airspeed 2024-06-09 14:25:02 +10:00
Paul Riseborough 2c3174b77b AP_NavEKF3: Strengthen protection against GPS jamming
These changes prevent the EKF from consuming GPS data too soon when it is recovering from jamming if the EKF is able to navigate using dead reckoning.
2024-06-09 14:25:02 +10:00
Paul Riseborough 324d5da811 AP_NavEKF3: Use last observed wind states to enable dead reckoning
These changes enable the EKF to use the last observable wind velocity vector estimate to synthesise an airspeed measurement if operating without an airspeed sensor and when all other measurement types that can constrain velocoty drift are lost. This enables the EKF to use dead reckoning to continue after loss of GPS when there is no air speed sensor fitted and without the need to set a default airspeed value.
The logic used to fuse a default airspeed value has also been cleaned up and the call to FuseAirSpeed() from inside SelectBetaDragFusion() has been removed.

AP_NavEKF3: Fix error in default airspeed observation variance

AP_NavEKF3: Enable shadow fusion of airspeed when sensor is disabled
2024-06-09 14:25:02 +10:00
Paul Riseborough e53416e77b AP_NavEKF3: Apply GPS quality checks following loss of 3D fix if velocity error is bounded 2024-06-09 14:25:02 +10:00
Andrew Tridgell 94cbd7cbfb AP_NavEKF3: use NEW_NOTHROW for new(std::nothrow) 2024-06-04 09:20:21 +10:00
Paul Riseborough 91423d4c71 AP_NavEKF3: Remove unncessary local position height reporting offset
The offset generated by the EK3_OGN_HGT_MASK parameter bit 2 option is applied to the baro or range finder sensor so it does not have to be applied to the local position height.
2024-05-23 10:35:51 +10:00
Paul Riseborough 5fded75eb6 AP_NavEKF3: Adjust sensor height when EK3_OGN_HGT_MASK bit 2 is set 2024-05-23 10:35:51 +10:00
Peter Barker 36e385fb22 AP_NavEKF3: set-origin failure comment improved 2024-05-21 09:56:02 +10:00
Randy Mackay 4e2dd7c399 AP_NavEKF3: accept set origin even when using GPS 2024-05-21 09:56:02 +10:00
Paul Riseborough 3c8b3be7a7 AP_NavEKF3: Change yaw source to stop compass use when calibrating 2024-04-23 15:19:56 +09:00
Andrew Tridgell dce2492321 AP_NavEKF3: use filtered gyro in INS position correction
this reduces the impact of IMU noise on the output velocity from the
EKF
2024-04-17 14:53:59 +10:00
Iampete1 21df26de75 AP_NavEKF3: use set_and_defualt when changing imu mask 2024-03-26 11:35:36 +11:00
Randy Mackay 65b4db5ede AP_NavEKF3: define Yaw alignment min GPS speed per vehicle 2024-03-26 10:01:42 +11:00
Peter Barker ce04d69d53 AP_NavEKF3: correct compilation in SITL when logging is disabled
this code is gated on HAL_BOARD_SITL already, and usually we have logging in SITL.  But not always
2024-03-12 09:25:17 +11:00
Marek S. Lukasiewicz 07681416f5 AP_NavEKF3: Match handling of MAV_CMD_EXTERNAL_POSITION_ESTIMATE to common MAVLink dialect 2024-03-07 18:13:51 +11:00
Peter Barker 21edc6aee1 AP_NavEKF3: do not trust number of beacons to not change
if the count from the beacon library changes we may end up looking at memory we shouldn't
2024-02-28 18:37:42 +11:00
Peter Barker a517d5fed1 AP_NavEKF3: correct initialisation of BeaconFusion data structure
the fusionReport object is not being cleared when the filter undergoes a forced reset.

So delete and recreate the object.  Will also make this sensitive to the number of beacons changing.

Also don't attempt to allocate zero bytes.
2024-02-28 18:37:42 +11:00
Peter Barker 2df3cb98c6 AP_NavEKF3: move initialisation of rngBcn into BeaconFusion method 2024-02-27 12:04:14 +11:00
Peter Barker e9d065c1cc AP_NavEKF3: tidy population of fusion reports
simply take a refefence and use it
2024-02-26 20:55:41 +11:00
Simon Hancock 07eecd3b67 AP_NavEKF3: Updates to log message units and help text
Set quaternion component units to no-unit from UNKNOWN
2024-01-21 14:26:54 +11:00
Peter Barker 0afed2f8c2 AP_NavEKF3: allow compilation with HAL_LOGGING_ENABLED false 2024-01-17 18:25:55 +11:00
Peter Barker 10c8af3409 AP_NavEKF3: do not use fmaxF on floating point values
it returns double, which will not fit into this float
2023-09-12 09:47:17 +10:00
Paul Riseborough 5aa7bd0b7a AP_NavEKF3: Allow operation with EK3_SRCx_POSZ = 0 (NONE) 2023-08-23 18:25:26 +10:00