18c8389c26
Improve comment aligment
2012-08-27 00:37:10 +02:00
432e293076
uncrustify libraries/AP_Mount/AP_Mount.h
2012-08-21 19:04:08 -07:00
dd167c5d6f
uncrustify libraries/AP_Mount/AP_Mount.cpp
2012-08-21 19:04:08 -07:00
aef8c7af0a
AP_Mount: Reduce parameter name length, to allow MNT2_* strings to be smaller than the limit of 15 characters
2012-08-10 00:16:52 +02:00
1683f18bff
Allow fully independent operation of two AP_Mount instances
2012-08-08 23:11:23 +02:00
45b10a51ff
AP_Mount: Enable Joystick speed code, now that the framework supports more than 16 parameters per group.
...
Save some bytes by skiping the redundant *_rc_in initialization in the AP_Mount() constructor
2012-08-08 22:45:36 +02:00
3159c9ed99
AP_Mount: fixed defaults for angles
...
this saves some eeprom space by not saving the 4500 values
2012-08-08 13:04:49 +10:00
e9d0ae3e7f
AP_Param: update remaining libraries for new constructor syntax
2012-08-08 12:11:57 +10:00
fbc25e4baa
AP_Mount: move mount to a "retracted position" into the fuselage with a fourth servo
2012-08-06 01:27:29 +02:00
36bcd827b4
AP_Mount: Allow using any RC channel to control any of the mount axes.
...
This has the added benefit of saving 60 bytes and simplifying Mission Planner gui.
Moved some code from RC_Channel_aux to AP_Mount class
The servos get written by the update_mount_position() function, this simplifies main()
PS: The beauty of using libraries: I did not have to touch a single line of ArduPlane's code!
2012-08-05 23:48:57 +02:00
960c2f08af
AP_Mount: addition of Amilcar's mount_type
...
set_roi_cmd modified to take a Location. I know the intention was for set_roi_cmd to interpret the MAVLink command directly but unfortunately in arduCopter missions are only made up of waypoints (which are Locations).
2012-07-25 11:00:38 +09:00
a2e6af1f9c
AP_Mount: added set_manual_rc_channel and set_manual_rc_channel_function to allow input of pitch, roll and yaw controls from a regular RC_Channel (i.e. not RC_Channel_aux)
...
For now, angles red in are always of the range -45 deg ~ 45 deg which is consistent with the existing arducopter implementation but should be improved to scale the pilot's input to the mount's actual range.
2012-07-18 23:20:05 +09:00
23f009f665
Improve parameter documentation, it still does not work, but is an improvement.
...
I just do not understand why these parameters do not appear in Mission planner :(
2012-07-17 23:32:30 +02:00
eb647b5320
AP_Mount: add support for non-spring-loaded joysticks
2012-07-11 00:07:33 +02:00
42301af148
Remove unused function, remove unnecessary angle wrapping.
2012-07-11 00:06:45 +02:00
74ef712cd1
Allow mount control when no AHRS exists
...
Allow mount control on non stabilized axes
2012-07-11 00:06:26 +02:00
8bd7ef9b9a
AP_Mount: Fix radians/degrees scaling regressions
...
Rename calculate() into stabilize()
Implement MAV_MOUNT_MODE_RC_TARGETING initialization
Document to make sure this radians/degrees mess up does not happen again
2012-07-07 21:56:56 +02:00
6904bef611
Document++
2012-07-05 00:33:46 +02:00
8400bd67f8
Remove unused function
2012-07-05 00:33:10 +02:00
1142ec0665
AP_Mount: removed unused enum
2012-07-03 10:39:34 +10:00
f150c645c8
Mount: enable mount control via eeprom parameters
...
this enables MNT_* parameter control of the camera mount code. It also
fixes the conversion of calculated angles between degrees and
integers, and fixes stabilised mount control when yaw control is not
available.
2012-07-03 10:21:01 +10:00
8f646467e5
Move local temp variables to the stack it saves 1952 bytes
...
Add function comments
Only use _ on class member variables
Only point to a 3D GPS point if GPS has a fix
Implement MAV_MOUNT_MODE_MAVLINK_TARGETING
2012-06-17 22:25:51 +02:00
f7ef60565e
Add "3 axis camera stabilization" and "point camera to 3D point" functionality
...
Patch by Gregory Fletcher and reviewed by me
2012-06-13 20:55:19 +02:00
784f08728b
AP_Mount: adapt library for AHRS framework
2012-03-19 17:29:02 +11:00
f6f05755d9
AP_Mount - #include FastSerial first to allow it to compile under Arduino 1.0
2012-02-26 15:31:56 +09:00
01df18b292
Added camera and/or antenna mount support.
...
It is fully configurable with the mission planner, there is no need to change
the source code to adapt to your setup.
It needs more testing, but the SIL is not working for me.
2011-10-31 22:55:58 +01:00
cba78a29ab
Again remove some more files from the APM_Camera branch
2011-09-10 12:51:48 +02:00
a540f60cc8
These files are not meant to be in master, they should only be in the APM_Camera branch for now
2011-09-09 16:37:42 +02:00
9e36c13f9c
nightly check in, version not stable.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3164 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-23 20:36:30 +00:00
c140113583
Checkin before beddy byes
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3154 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-22 21:50:11 +00:00
2048d132b0
change of mind payloads should be split into their separate folders.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3144 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-21 19:58:15 +00:00
Amilcar Lucas
uncrustify
Andrew Tridgell
rmackay9
joeholdsworth@gmail.com