bugobliterator
b93c9256c7
AP_HAL_ChibiOS:hwdef/common: disable second core on dual core MCUs
2024-07-05 14:16:27 +10:00
tsubashmail@gmail.com
ae9e15ade5
HAL_ChibiOS: port for STM32L4+ processor
...
Added support for stm32l4+ processor
- Added scripts for hwdef generation
- Tested in custom hardware prototype (stm32l4r5vit6)
- Tested all peripherals and auto pilot modes.
2023-04-14 07:48:56 +10:00
Andy Piper
667b386356
AP_HAL_ChibiOS: port to ChibiOS 21.11.x
...
convert RCOutput to new virtual timer interface
cope with SDC vs SDMMC
use new SPIv3 driver. Correct clocks for SDMMCv2.
add STM32L431 support
port ChibiOS config to version 8
support SPIv3 driver model v2 on H7
use currcore in debug options
use new mmc API
disable speed optimizations in the bootloader to save a little flash
upgrade to halconf v8.4
relax constraints on QSP/flash clock.
add support for disabling QSPI reset in main firmware
2023-03-29 20:49:40 +11:00
Andrew Tridgell
91227433e9
HAL_ChibiOS: support VDD_5V_PERIPH_EN with active high
2023-03-15 19:08:53 +11:00
Peter Barker
349dd5089c
AP_HAL_ChibiOS: replace NO_FASTBOOT with AP_FASTBOOT_ENABLED
2023-03-01 18:16:31 +11:00
Peter Barker
1cb4bc223d
AP_HAL_ChibiOS: entirely remove check_limit_flash_1M if not needed
...
taking up valuable space on non-F427 boards
2023-02-22 19:41:49 +11:00
Kirill Shilov
8a51c73e4a
AIRLink: added LTE module enable pin to hwdef
2022-12-18 07:19:42 +11:00
Andrew Tridgell
07f80c2442
HAL_ChibiOS: make check_limit_flash_1M() available in main firmware
2022-10-06 10:58:46 +11:00
Andrew Tridgell
f7bc7b0d9b
HAL_ChibiOS: support more enable pins for late enable
2021-11-10 08:47:21 +11:00
bugobliterator
f298ea406e
HAL_ChibiOS: enable RNG only for H7 based boards off for the rest by default
2021-10-07 19:43:11 +11:00
bugobliterator
fc4d59c5a4
HAL_ChibiOS: setup hw random number generator for stm32 chips
2021-10-07 19:43:11 +11:00
Andrew Tridgell
52124cf602
HAL_ChibiOS: fixed f1 bootloader build errors
2021-10-06 06:44:36 +11:00
Andrew Tridgell
0212e23cd3
HAL_ChibiOS: added support for STM32L496 MCUs
...
good MCU for AP_Periph
2021-09-24 18:08:00 +10:00
Andrew Tridgell
2e4766fe54
HAL_ChibiOS: ensure HI_POWER periph is on
2021-09-07 10:40:44 +10:00
Andrew Tridgell
439a944801
HAL_ChibiOS: added support for STM32G474 MCU
2021-03-23 12:01:20 +11:00
Andrew Tridgell
243cf2199d
HAL_ChibiOS: disable shared DMA on IOMCU
...
this saves about 600 bytes of ram
2021-02-24 18:21:08 +11:00
Andrew Tridgell
ba69cd72c9
HAL_ChibiOS: improved stack checking and stack display
...
display both ISR stack and thread stacks. Show total stack sizes as
well as amount of stack remaining
2020-12-01 11:14:50 +11:00
Andrew Tridgell
84eac7642b
HAL_ChibiOS: improved stack checking
2020-12-01 11:14:50 +11:00
Andrew Tridgell
ce68e0fbb5
HAL_ChibiOS: fixed bootloader build
2020-04-29 07:36:55 +10:00
Andrew Tridgell
18e88e0ea3
HAL_ChibiOS: implement stack overflow hook
...
this needs C bindings to allow call from low level RTOS thread
switching code
2020-04-29 07:36:55 +10:00
Andrew Tridgell
8ffd1050eb
HAL_ChibiOS: fixed build on STM32F3
2020-01-02 09:52:57 +11:00
Andrew Tridgell
faf34970e1
HAL_ChibiOS: automatically control pullup/pulldown on inverted UARTs
...
this makes setup of sport telemetry much easier
2020-01-02 09:52:57 +11:00
Andrew Tridgell
c1575654e2
HAL_ChibiOS: added optional debug code for hardfaults and panics
...
this implements a soft-serial print function that can be used to get
debug out on a GPIO pin in a panic
2019-11-27 14:12:04 +11:00
Andrew Tridgell
fc8d9e8af5
HAL_ChibiOS: added RTC_BOOT_FWOK value for RTC reboot register
...
this is used in CAN firmware to know if the main app firmware has run
for long enough to be considered good
2019-10-26 15:32:10 +11:00
Andrew Tridgell
d1565a96c5
HAL_ChibiOS: wrap cacheBuffer functions
...
needed to avoid problem with end() method in UARTDriver shadowing with
F7 implementation of cache macros
2019-08-27 15:40:43 +10:00
Andrew Tridgell
16bdaaa1af
HAL_ChibiOS: added support for STM31F10x for AP_Periph
2019-08-27 10:29:56 +10:00
Andrew Tridgell
dbfe6b8019
HAL_ChibiOS: implement persistent_data for watchdog
...
this is a much simpler approach to persistent data
2019-05-15 15:33:48 +10:00
Andrew Tridgell
6333494d99
HAL_ChibiOS: disable peripheral power on boot on fmuv3
...
then enable after 100ms, and let settle for 20ms. This is to fix an
issue with peripheral power on consistency with all fmuv3 boards
Thanks to Philip for the suggestion
2019-05-11 18:45:18 +10:00
Andrew Tridgell
2778a1b01e
HAL_ChibiOS: save/restore home position in backup registers
...
# Conflicts:
# libraries/AP_HAL_ChibiOS/hwdef/common/stm32_util.c
2019-04-22 16:53:35 +10:00
Andrew Tridgell
9ca67dc811
HAL_ChibiOS: implement was_watchdog_armed()
2019-04-22 16:53:35 +10:00
Andrew Tridgell
1acb7e977f
HAL_ChibiOS: added ability to restore safety state on watchdog reset
2019-04-22 16:53:35 +10:00
Andrew Tridgell
cda1959629
HAL_ChibiOS: added support for more flexible memory regions
...
this allows for an arbitrary number of memory regions, with each one
flagged as DMA safe, fast or normal
2019-02-26 16:18:26 +11:00
Andrew Tridgell
51b4d54f70
HAL_ChibiOS: disable show_stack_usage in bootloader
2019-02-26 16:18:26 +11:00
Andrew Tridgell
565706cf7e
HAL_ChibiOS: fixed H7 flash handling
2019-02-26 16:18:26 +11:00
Andrew Tridgell
27a1fec911
HAL_ChibiOS: TBS-F7 is active low on sd power
2019-02-22 10:27:17 +11:00
Andrew Tridgell
94bace91a4
HAL_ChibiOS: bring up sensors rail after boot on TBS F7
...
this prevents a reset loop on GPIO config
2019-02-22 10:27:17 +11:00
Andrew Tridgell
a0ed658fcc
HAL_ChibiOS: added palReadLineMode() function
...
used to change and restore line modes
2018-11-16 08:30:40 +11:00
Siddharth Purohit
8ac38d73f7
HAL_ChibiOS: add option for NO_FASTBOOT build and enable it for iomcu
2018-09-19 12:14:15 +10:00
Siddharth Purohit
42b4730d88
HAL_ChibiOS: add changes to hwdef to support STM32F1 based controller
2018-09-19 12:14:15 +10:00
Andrew Tridgell
385f735799
HAL_ChibiOS: avoid 64 bit maths in AP_HAL::micros()
...
this saves a few cycles
2018-08-08 21:24:49 +10:00
Andrew Tridgell
7aba99e229
HAL_ChibiOS: fixes for ChibiOS version update
2018-08-03 13:44:59 +10:00
Andrew Tridgell
f8e2edbc7f
HAL_ChibiOS: fixed cache flush for updated ChibiOS version
2018-08-03 13:44:59 +10:00
Andrew Tridgell
f2d602690e
HAL_ChibiOS: fixed build error with some compilers
2018-07-13 08:50:46 +10:00
Andrew Tridgell
0201893f7c
HAL_ChibiOS: fixed peripheral power-up on fmuv5
...
we need to do the powerup before we initialise the UARTs
2018-07-13 07:34:30 +10:00
Andrew Tridgell
63a0a4979c
HAL_ChibiOS: delay peripheral power on for fmuv5
...
this should prevent SiK radios staying in the bootloader
2018-07-13 07:34:30 +10:00
Andrew Tridgell
2b7b499c63
HAL_ChibiOS: added support for RTC sig for fast boot
2018-06-28 11:35:13 +10:00
Andrew Tridgell
00d919018b
HAL_ChibiOS: added RTC clock implementation
2018-06-15 08:01:22 +10:00
Alexander Malishev
eac5d13f1c
HAL_ChibiOS: use 2 channels in SoftSigReaderInt.cpp
2018-06-06 08:23:51 +10:00
Andrew Tridgell
0e09dc75c0
HAL_ChibiOS: flush all memory on chSysHalt()
...
this makes debugging a lot easier, as gdb can see the values in dcache
2018-06-06 07:15:41 +10:00
Andrew Tridgell
2493cdbcb6
HAL_ChibiOS: switch to new bouncebuffer system
...
this removes the dma_flush and dma_invalidate methods and uses a
common bouncebuffer system for all CPU types. This enables microSD
support on STM32F7
2018-06-06 07:15:41 +10:00