Peter Barker
97b07d9c84
GCS_MAVLink: add option to get the autopilot to hard-fault itself
2020-03-19 16:03:58 +11:00
Andrew Tridgell
39fc324854
GCS_MAVLink: convert to new get_rpm() API
2020-03-12 08:36:40 +11:00
Andrew Tridgell
aaf828c9d4
GCS_MAVLink: consider NO_CHANGE as success for bootloader flash
...
this prevents GCS users from seeing "update failed"
2020-03-11 16:30:06 +11:00
Peter Barker
ebfa910774
GCS_MAVLink: GCS_Dummy: add missing CR to console output of statustexts
...
send_text and friends don't expect the caller to add the CR; the GCS
will add one. Since we're jsut emitting to console, add one ourselves.
2020-03-10 19:07:08 +11:00
Rishabh
f3e66055e5
GCS_MAVLink: Alert GCS if user tries calibration while vehicle is armed
2020-03-03 11:37:19 +11:00
Peter Barker
fbe2e75b9f
GCS_MAVLink: divide time allowed to send messages fairly
2020-02-27 08:49:59 +11:00
Peter Barker
727c12c388
GCS_MAVLink: move initialisation of serial and gcs to AP_Vehicle
2020-02-25 11:50:55 +11:00
Peter Barker
e2c9f6a8a1
GCS_MAVLink: add flags to MAV dataflash log
...
holds various pieces of simple information about a link
2020-02-25 10:59:22 +11:00
Peter Barker
f8f4ed7ee0
GCS_MAVLink: log disarm method
2020-02-22 12:16:29 +11:00
Andrew Tridgell
20ea1a3dc7
GCS_MAVLink: don't send statustext from other than main thread
...
This fixes high stack usage in the RCIN thread when it notifies the
GCS of a new RCIN protocol. The problem is severe when signing is
enabled, as signing adds over 500 bytes to stack cost of sending a
mavlink msg
fixes issue #13615
2020-02-20 10:39:29 +11:00
Michael du Breuil
1f8c030eba
GCS_MAVLink: Allow scripting to start/stop the REPL
2020-02-18 17:23:22 -07:00
Michael du Breuil
296c014d14
GCS_MAVLink: Fix excess trimming of autopilot version
2020-02-19 09:10:02 +11:00
Andrew Tridgell
32ecd904bd
GCS_MAVLink: use MAV_SYS_STATUS_PREARM_CHECK
...
this allows GCS to continually display prearm check status
2020-02-18 15:16:02 +11:00
Matt Lawrence
c84dcd9bf8
GCS_Mavlink: Add routing for GoPro heartbeat
2020-02-18 11:13:27 +11:00
Peter Barker
87a31c6409
GCS_MAVLink: don't recalculate max parameter count if not streaming params
2020-02-18 10:33:41 +11:00
Peter Hall
b1742b4e19
GCS_Mavlink: constrain battery current to avoid wrap
2020-02-12 08:04:39 +11:00
Andrew Tridgell
f7eba43cb8
GCS_MAVLink: raise ftp stack size to 3072 from 1024
...
this prevents memory corruption on directory listing
2020-02-11 13:32:17 +11:00
Peter Hall
ba811052f8
GCS_Mavlink: report on fence limiting
2020-02-04 10:24:33 +09:00
Randy Mackay
7a5f57f940
GCS_MAVLink: send rc output mode banner to GCS
2020-02-04 12:23:33 +11:00
Peter Barker
1650979a2b
GCS_MAVLink: add support for MAV_CMD_DEBUG_TRAP
2020-01-29 10:27:01 +11:00
Andrew Tridgell
0e7ddebd15
GCS_MAVLink: fix for updated mavlink extensions
2020-01-29 08:16:59 +11:00
Peter Barker
e248bdfb16
GCS_MAVLink: split statustexts into 50-byte chunks using mav2 extensions
2020-01-28 19:56:38 +11:00
Peter Barker
8fc64ccbe9
GCS_MAVLink: allow NavEKFs to be compiled out
2020-01-21 11:53:18 +11:00
Peter Barker
a9f62f196e
GCS_MAVLink: consolidate places we snprintf statustexts
2020-01-14 10:38:43 +11:00
Andrew Tridgell
8ae5dffd31
GCS_MAVLink: fixed valgrind error in mission upload
...
affects DO_JUMP
2020-01-11 08:29:34 +11:00
Randy Mackay
188fdfb1b8
GCS_MAVLink: send optflow message even if no height estimate
2020-01-06 11:36:43 +09:00
Andrew Tridgell
1b528137f7
GCS_MAVLINK: cope with AP_Frsky_Telem being created after init
...
may be created by the FPort backend
2020-01-02 09:52:57 +11:00
murata
91e09338ea
GCS_MAVLInk: Judgment of non-existence value by PARAM_SET
2019-12-31 10:12:01 +11:00
Andrew Tridgell
c6322c7c98
GCS_MAVLink: send abs throttle in VFR_HUD
2019-12-24 15:14:03 +11:00
Peter Barker
01710c035e
GCS_MAVLink: handle proximity and rangefinder messages
2019-12-24 12:08:54 +11:00
Oliver Walters
5fa54f3986
GCS_MAVLink: added support for Piccolo CAN ESCs
2019-12-22 09:48:40 +11:00
Peter Barker
d1bbe4f03b
GCS_MAVLink: correct output when ROUTING_DEBUG is set
...
This is a define in the code itself, so rarely a problem
2019-12-20 10:00:07 +11:00
Andrew Tridgell
dd73eac08c
GCS_MAVLink: support MAV_CMD_FIXED_MAG_CAL_YAW
2019-12-18 17:20:37 +11:00
Peter Barker
ebbcd00873
GCS_MAVLink: send statustext to all GCSs until update_send is called
...
until update_send it called we don't mark channels as streaming, so
send_statustext won't send to that channel.
Calculating the streaming mask could have been done as part of the init
call, but this fix may allow for information getting to the user in the
case that the streaming parameters are all zero, too.
2019-12-18 14:36:58 +11:00
Andrew Tridgell
f8f591c7db
GCS_MAVLink: fixed critical error on prefight cal ops
2019-12-13 09:30:48 +11:00
Randy Mackay
6d94d2b62f
GCS_MAVLink: remove send-text re allocating for fence
2019-12-10 08:51:19 +11:00
Peter Barker
b48da34c61
GCS_MAVLink: move setting of GPS SYS_STATUS bits up to base class
2019-12-05 13:02:19 +11:00
Andrew Tridgell
1eebae2346
GCS_MAVLink: use new SERIAL_CONTROL_SERIALn enums
2019-12-01 12:48:23 +11:00
Peter Barker
314ea32ede
GCS_MAVLink: any internal error means MAV_STATE_CRITICAL
2019-11-27 14:27:53 +11:00
Marian Soban
6e961b55eb
GCS_MAVLink: LTM telemetry support
2019-11-26 12:14:13 +11:00
Peter Barker
a96a4c0510
GCS_MAVLink: correct encoding used for send_to_components
...
These have to be packed onto the channel - otherwise they may ge
tencoded as mavlink1 instead of mavlink2 (or vice-versa)
2019-11-26 12:10:12 +11:00
Michael du Breuil
7582a5b4a4
GCS_MAVLink: Send GPS logging as part of the logging status bits
2019-11-20 11:06:16 -07:00
Andrew Tridgell
2b27cd2ce9
Plane: Add EFI Support
2019-11-17 20:10:54 +11:00
Andrew Tridgell
00e3344321
GCS_MAVLink: add EFI_STATUS message
2019-11-17 20:10:54 +11:00
Peter Barker
7d2557b316
GCS_MAVLink: correct txspace return value issues
...
- checking of space in send_to_active_channels was incorrect - did not
take into account locked status of the channel
- corrected return value on comm_get_txspace - took a uint32_t, cast it
to int16_t, checked it for zero, then cast it to uint16_t on return.
That's just... odd.
2019-11-12 16:33:12 +11:00
Peter Barker
a893a5483c
GCS_MAVLink: support sysid targetting
2019-11-12 07:52:22 +08:00
Peter Barker
ac7111f1d1
GCS_MAVLink: adjust for renaming of RangeFinder files
2019-11-12 07:14:37 +08:00
Mark Whitehorn
a25846b8a2
GCS_MAVLink: change in_sensor_config_error to in_config_error
2019-11-08 10:14:34 +11:00
Peter Barker
402f3ec09c
GCS_MAVLink: honour coordinate altitude frames for DO_SET_ROI
...
Also use {} to construct the location.
Note the assumption that the frame is relative-to-home when we receive
the command via COMMAND (as opposed to COMMAND_LONG)
Note that this is a behavioural change as
2019-11-05 19:55:45 +11:00
Peter Barker
66d460c19b
GCS_MAVLink: correct format in short-write panic message
2019-11-05 11:29:08 +11:00