022314ed4c
process MAVLInk packets during gps detection and IMU calibration
...
this allows the GCS to connect immediately on startup
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2994 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-01 08:08:52 +00:00
1e915aae2b
2.0.39
...
Added reset for all nav I when entering manual modes.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2992 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-01 05:12:10 +00:00
d70055398b
2.0.39
...
Added extra groundstart init for the Ground Station
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2991 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-01 04:47:15 +00:00
cdfa3b07cb
2.0.39
...
Changed how the throttle_slew was added to the output.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2990 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-01 03:48:16 +00:00
a0f61fd29e
2.0.39
...
Added a limiter to Throttle_slew to not make the throttle go past 800.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2989 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-01 03:39:44 +00:00
f951ffb602
IMU: fixed HIL init with callback
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2988 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-31 23:35:37 +00:00
22b5eb4273
GPS: added delay hook for GPS detection
...
this allows for MAVLink to be up during GPS detection
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2987 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-31 22:34:37 +00:00
28cf3dfc79
IMU: added delay callback hooks to IMU initialisation
...
this allows the imu init() call to use a custom replacement for
delay(), which will allow for the processing of MAVLink packets during
IMU initialisation
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2986 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-31 22:34:25 +00:00
f04436e68b
2.0.39
...
mistake on the defaults for kP - not symmetrical.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2985 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-31 20:09:27 +00:00
cc054a7fac
2.0.39
...
mistake on the defaults for kP - not symmetrical.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2984 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-31 20:06:36 +00:00
738d5db914
2.0.39
...
limit RTL to 35°
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2983 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-31 19:57:35 +00:00
05122be463
2.0.39
...
small change to RTL to prevent negative effects from flying backwards.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2982 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-31 19:42:07 +00:00
b2a47c01a7
small change to RTL to prevent negative effects from flying backwards.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2981 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-31 19:41:11 +00:00
f096d8cb23
OpticalFlow - add check to see if sensor has initialised correctly.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2974 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-31 04:31:36 +00:00
bcc7bed491
fix hil build
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2970 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-31 01:24:20 +00:00
e63fc0fe68
removed scaling on control in because it might cause rounding issues.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2969 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-30 23:48:38 +00:00
e32f8057bb
Reworked the filtering algorithm based on Maxbotics recommendations to use a Mode filter
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2968 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-30 23:34:25 +00:00
82e51aec82
Big update 2.0.38
...
moved ground start to first arming
added ground start flag
moved throttle_integrator to 50hz loop
CAMERA_STABILIZER deprecated - now always on
renamed current logging bit mask to match APM
added MA filter to PID - D term
Adjusted PIDs based on continued testing and new PID filter
added MASK_LOG_SET_DEFAULTS to match APM
moved some stuff out of ground start into system start where it belonged
Added slower Yaw gains for DCM when the copter is in the air
changed camera output to be none scaled PWM
fixed bug where ground_temperature was unfiltered
shortened Baro startup time
fixed issue with Nav_WP integrator not being reset
RTL no longer yaws towards home
Circle mode for flying a 10m circle around the point where it was engaged. - Not tested at all! Consider Circle mode as alpha.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2966 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-30 20:42:54 +00:00
ebf1697158
Reworked the filtering algorithm based on Maxbotics recommendations to use a Mode filter
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2965 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-30 20:35:36 +00:00
39677e7e66
Added some missing functions needed to get HIL to compile
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2964 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-30 20:34:23 +00:00
5c3837757a
Added ability to grab an unfiltered value from the ADC
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2963 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-30 20:33:45 +00:00
74edb558f4
GPS: fixed the GPS specific test programs
...
This fixes the build
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2962 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-30 08:48:17 +00:00
4dfce5d860
Fix Hil build on 2560
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2961 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-30 01:39:12 +00:00
7026405951
Changed the PID derivative filter to a moving average with 4 samples. Having great luck with it and High kD when using noisy sensors.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2957 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-29 21:52:37 +00:00
1dc0063e67
HIL: fixed radio_status in setHIL() for APM_RC
...
thanks to Michael Oborne for noticing this!
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2952 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-28 12:11:25 +00:00
7d65418fa1
TradHeli - updated gps mount design files
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2949 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-26 14:13:48 +00:00
43c193bbb6
TradHeli - mounting plate and gps mount design files
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2946 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-26 12:42:36 +00:00
e783246380
fixed defaults
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2944 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-26 03:44:16 +00:00
f2d3c0a246
added relay control to CH6
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2943 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-26 03:37:41 +00:00
580f981d30
fixed quad PWM clipping
...
this adopts the simpler approach suggested by Jason.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2936 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-22 21:25:59 +00:00
87a260656e
fix float issues - crosstrack & target alt
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2935 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-21 23:36:22 +00:00
739a69c988
ACM - partial integration of optical flow sensor
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2934 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-21 23:14:53 +00:00
7ae9a53d41
quad: fixed the clipping of PWM outputs
...
when we clip a motor output we need to decrease the opposite motor by
the same amount, otherwise we lose the ability to control the quad
when the servo outputs are extreme
Found using the quad HIL test. Thanks to Jani for testing this on a
real quad!
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2929 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-20 00:33:04 +00:00
b930b892c2
DataFlash library - changed to use standard arduino SPI library
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2928 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-19 23:00:18 +00:00
e14d0df898
HIL: fixed build with HIL and logging
...
thanks to Jani for noticing this
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2925 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-19 10:51:07 +00:00
9d9d82b222
HIL: we only need 50Hz attitude for HIL
...
putting it in the fastest loop clogged up mavlink too much
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2923 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-19 09:49:57 +00:00
ab8d8fedb9
AP_OpticalFlow - fixes to position calculations (lat was reversed and would calculate position even with surface quality was very low)
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2913 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-18 21:51:27 +00:00
5c3113955d
doubled Slew rate limiter to 2 m/s max @ 10 hz.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2912 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-18 18:18:47 +00:00
a4cf3bf87c
HIL: fixed altitude calculation
...
ACM uses a zero home altitude, so we need an offset when using GPS for
altitude
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2910 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-18 12:44:02 +00:00
f915eb7052
GPS-HIL: set new_data on setHIL()
...
this fixes navigation for ACM in HIL
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2909 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-18 12:42:36 +00:00
a0d599ad95
2.0.37
...
Added rate of change limit for noisy Sonars.
converted to static functions - Tridge
New Throttle PIDs from Jack
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2904 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-17 19:14:23 +00:00
c741392434
2.0.37
...
Added rate of change limit for noisy Sonars.
converted to static functions - Tridge
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2902 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-17 19:08:29 +00:00
f486d84271
2.0.37
...
Added rate of change limit for noisy Sonars.
converted to static functions - Tridge
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2901 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-17 19:08:17 +00:00
de76785499
Added a slew rate limit
...
reworked filter, same results, just wanted to get rid of modulus.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2900 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-17 19:05:18 +00:00
6491ac2b58
CLI: make it possible to completely disable the CLI
...
set CLI_ENABLED to DISABLED for no CLI. This saves a lot of memory
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2895 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-17 10:34:05 +00:00
0227c97a99
HIL: don't access dcm functions in HIL mode
...
the dcm is not valid in HIL_MODE_ATTITUDE
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2894 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-17 10:33:53 +00:00
1a35209e5d
HIL: enable reception of GPS and ATTITUDE via MAVLink
...
this allows us to get GPS position and ATTITUDE in HIL_MODE_ATTITUDE
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2893 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-17 10:33:42 +00:00
e6a46d888f
HIL: send location information
...
we don't send MSG_LOCATION in HIL mode during GPS updates, as we don't
call the GPS update routines, so we need to send MSG_LOCATION as part
of the Position stream
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2892 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-17 10:33:33 +00:00
ba21d6d642
HIL: when in HIL_MODE_ATTITUDE, we get altitude from gps setHIL
...
we need to skip the barometer and sonar calls
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2891 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-17 10:33:17 +00:00
3dd3f1091e
don't force config in default APM_Config.h
...
defaults for these are already in config.h, but protected with #ifndef
wrappers. The #ifndef wrappers are useful to allow users to have
makefile targets for different configs, so you can (for example), do
"make heli" with a local makefile
This makes it easier for developers to ensure that all configs build
correctly
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2890 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-17 10:33:09 +00:00
tridge60@gmail.com
jasonshort
rmackay9@yahoo.com
mich146@hotmail.com
jphelirc