Randy Mackay
f93a259b04
Copter: add comment to Solo section in Parameters.h
2015-06-14 14:47:02 +09:00
Jonathan Challinger
fd37a48f8e
Copter: clean up Parameters.h comments a bit
2015-06-14 14:44:15 +09:00
Jonathan Challinger
035c0b567e
Copter: reserve param indices that exist in Solo repo
2015-06-14 14:44:13 +09:00
Randy Mackay
aa05325b54
Copter: add althold as ekf failsafe action
2015-06-10 12:06:08 +09:00
Randy Mackay
4408f01f39
Copter: rename ekf_check_thresh to fs_ekf_thresh
2015-06-10 12:06:06 +09:00
Andrew Tridgell
1792710f41
Copter: added a bit in LOG_BITMASK for PID logging
2015-05-27 15:09:47 +10:00
Andrew Tridgell
22524daf5f
Copter: added GCS_PID_MASK for mavlink rate tuning
2015-05-27 14:28:46 +10:00
Robert Lefebvre
575a5ad619
Copter: Set better default Rate PIDs for TradHeli
2015-05-22 09:38:26 +09:00
Randy Mackay
d8b7e4a199
Copter: add support for 4th mavlink channel
2015-05-15 15:07:27 +09:00
Jonathan Challinger
73d961cebc
Copter: mavlink initiated takeoff in alt-hold modes
...
adds PILOT_TKOFF_ALT for target altitude above home in cm for pilot initiated takeoff
2015-05-01 12:56:18 +09:00
Jonathan Challinger
b10cf0f38a
Copter: pre-takeoff throttle for sprung throttle sticks
...
Adds PILOT_THR_BHV, PILOT_TKOFF_DZ parameters
2015-05-01 12:56:16 +09:00
Jonathan Challinger
91a03ae0e7
Copter: add PILOT_THR_FILT and call set_throttle_out functions with that value
2015-04-16 21:00:11 +09:00
Randy Mackay
74b98b89d0
Copter: remove dcm check
2015-03-27 00:04:37 -07:00
Robert Lefebvre
a5af151a91
Copter: Initial expansion of Aux Switch to Ch7-12
2015-03-17 21:18:41 +09:00
Randy Mackay
b10730f35c
Copter: remove THR_MAX parameter
2015-03-16 14:49:34 +09:00
Randy Mackay
fbfc94cf69
Copter: remove GPS glitch and failsafe
...
The EKF failsafe now captures all failures that could lead to a bad
position including GPS glitches and a bad compass meaning we do not need
this protection in the main flight code.
2015-03-13 16:40:46 +09:00
Randy Mackay
6f6847c025
Copter: use only InertialNav_EKF
...
remove calls to unsupported functions including ignore_next_error,
set_altitude, etc.
2015-03-13 16:40:37 +09:00
Randy Mackay
d7f624be39
Copter: remove baro_glitch protection
2015-03-13 16:40:27 +09:00
Andrew Tridgell
3f906f6bd1
Copter: added CLI_ENABLED option
2015-03-09 17:58:37 +11:00
Leonard Hall
d5bbe6de03
Copter: remove TRIM_THROTTLE
...
throttle_trim is replaced by throttle_average which is initialised to
the throttle_mid parameter value at startup
2015-03-06 14:02:19 +09:00
Leonard Hall
c78480e14f
Copter: rename loiter_pos to pos_xy
...
Also renamed throttle_rate to vel_z, throttle_accel to accel_z
2015-03-06 14:02:17 +09:00
Leonard Hall
e232867661
Copter: move LOITER_RATE to 2-axis PI controller
...
Also rename LOITER_RATE to VEL_XY for parameters, definitions, variables
2015-03-06 14:02:15 +09:00
Leonard Hall
2b0fb45fe8
Copter: integrate PID input filter
2015-03-06 14:02:11 +09:00
Leonard Hall
a9a6e8856b
Copter: add AUTOTUNE_AGGR parameter
2015-03-06 14:02:02 +09:00
Leonard Hall
864168e5ea
Copter: add AUTOTUNE_AXES bitmask parameter
...
This is used to allow tuning just some axis
2015-03-06 14:02:01 +09:00
Randy Mackay
34503de18e
Copter: integrate SerialManager
...
Remove serial0, serial1 baud and protocol parameters
Pass serial_manager to GCS, GPS, mount, FrSky_telem objects during init
call SerialManager init_console on startup
use SerialManager's set_block_writes_all
2015-01-29 14:05:14 +11:00
Randy Mackay
d26fa6d827
Copter: minor format fix
...
no functional change
2015-01-07 11:58:23 +09:00
Robert Lefebvre
e10e020062
Copter: Add Landing Gear functionality to main code
2015-01-07 11:58:16 +09:00
Randy Mackay
b6bcf841e1
Copter: remove second camera mount
2014-12-16 21:26:20 +09:00
Randy Mackay
67fdfffc2a
Copter: remove OF_Loiter PIDs and tuning
2014-12-08 14:58:18 +09:00
Andrew Tridgell
c3d839456b
Copter: support logging while disarmed
2014-10-17 16:29:59 +09:00
Randy Mackay
b0e6931ab0
Copter: add DCM_CHECK_THRESH parameter
2014-10-16 17:22:11 +09:00
Randy Mackay
765ce2f6ca
Copter: optflow parameters moved to optflow class
2014-10-15 16:35:36 +09:00
Randy Mackay
cf98cc29b5
Copter: throttle deadzone parameter
...
Allows increasing or decreasing the deadband size in AltHold, Loiter,
PosHold flight modes
2014-08-29 15:54:34 +09:00
Randy Mackay
f3fd79597f
Copter: add ACRO_EXPO parameter
2014-08-14 11:47:37 +09:00
Randy Mackay
b52f8351e8
Copter: rename EKFCHECK_COMPASS to EKFCHECK_THRESH
...
Renamed because this threshold is now used for both compass and velocity
variance.
Also minor reorganisation of ekfcheck but no functional change.
2014-07-31 22:58:43 +09:00
Andrew Tridgell
3ccac6736d
Copter: rename TELEM2_PROTOCOL to SERIAL2_PROTOCOL
...
this matches SERIAL2_BAUD
2014-07-30 14:49:10 +10:00
Matthias Badaire
147e91877e
Copter: Add SERIAL2_PROTOCOL for GCS and FRsky telemtry
...
this allows selection of protocol type on telem2. The default is
MAVLink, but can be selected as FrSky protocol
2014-07-29 17:08:19 -07:00
Randy Mackay
7cc1501dc6
Copter: integrate baro glitch protection
2014-07-28 22:16:20 +09:00
Andrew Tridgell
0562907d9f
Copter: added AP_Terrain library
2014-07-24 21:46:06 +10:00
Randy Mackay
a4a4334b13
Copter: add EKFCHECK_COMPASS parameter
2014-07-22 23:13:22 +09:00
Randy Mackay
65e5367619
Copter: rename hybrid to poshold
2014-07-11 14:09:01 +09:00
Andrew Tridgell
a4b9b989b7
Copter: convert to new AP_RangeFinder API
2014-07-08 15:08:18 +10:00
Jonathan Challinger
5b36e65cb9
Copter: Add parameter LAND_REPOSITION to enable/disable user input during auto-mode landings and descents
2014-07-06 19:20:25 +09:00
Robert Lefebvre
5ee87f7561
Copter: Change TradHeli to use new AC_HELI_PID class.
2014-05-29 17:39:04 +09:00
Andrew Tridgell
cc6fba4cad
Copter: change baudrates parameters to 16 bit
2014-05-21 12:45:25 +10:00
Randy Mackay
a4c675c23e
Copter: add PILOT_ACCEL_Z parameter
...
Allows configurable z-axis acceleration when pilot is controlling
altitude
2014-04-30 21:46:13 +09:00
Randy Mackay
f467d7bc20
Copter: add Hybrid parameters
2014-04-23 14:59:25 +09:00
Andrew Chapman
fa3732ac6d
Copter: integrate AP_Rally
2014-04-19 15:00:23 +09:00
Randy Mackay
037a0b4e5a
Copter: dos2unix Parameters.h
2014-04-08 23:30:15 +09:00