Commit Graph

484 Commits

Author SHA1 Message Date
Randy Mackay 9ee28542da Copter: guided supports using wpnav to reach position targets 2021-09-15 16:02:02 +09:00
Andrew Tridgell 291479c277 Copter: no need to fabs() get_default_speed_down() as it does fabs already 2021-09-10 14:07:37 +09:00
Leonard Hall be079bfc9c Copter: additional yaw modes and fixes 2021-07-22 19:07:36 +09:00
Leonard Hall 30dc6f86a4 Copter: Guided: stop aircraft if an invalid command is sent 2021-07-22 19:07:36 +09:00
Leonard Hall e2415bcdb3 Copter: Guided close gap between TARGET_LOCAL_NED and TARGET_GLOBAL_INT 2021-07-22 19:07:36 +09:00
Leonard Hall a57102b161 Copter: support for acceleration-based AttitudeControl 2021-07-22 19:07:36 +09:00
Peter Barker c2c013964d ArduCopter: tidy frame description strings
Before: AP: Frame: TRI/
After: AP: Frame: TRI
2021-06-21 16:30:37 +10:00
Peter Barker cdbf6d216e ArduCopter: remove HIL support 2021-06-15 09:47:31 +10:00
Leonard Hall 4bae8f03a4 Copter: Use PosControl fixes 2021-05-24 20:13:37 +10:00
Pierre Kancir e0d181a793 Copter: use MAVLink POSITION_TARGET_TYPEMASK 2021-05-11 09:53:50 +10:00
Randy Mackay 5fcd2de4fa Copter: attitude target thrust-as-thrust bit moved from DEV_OPTIONS to GUID_OPTIONS 2021-04-20 09:56:38 +10:00
Peter Barker ff072c5215 Copter: stop sending POSITION_TARGET_LOCAL_NED in guided-angle mode
The values we were sending through were not relevant
2021-04-14 16:12:57 +09:00
Peter Barker 5df8dd8c50 Copter: move guided submode enumeration into ModeGuided 2021-04-14 16:12:57 +09:00
Andrew Tridgell 5a869174e5 Copter: use handle_landing_target() for precland
allows for jitter correction
2021-04-13 17:30:19 +10:00
Peter Barker 09a9bd73a4 ArduCopter: move handling of last-seen-SYSID_MYGCS up to GCS base class 2021-04-07 17:54:21 +10:00
Tatsuya Yamaguchi 0cce5699b2 Copter: change from control_mode to flightmode 2021-03-23 22:48:20 +11:00
Randy Mackay 2d9c6867f4 Copter: accept MISSION_START commands when vehicle is disarmed 2021-03-23 10:12:08 +09:00
Tatsuya Yamaguchi ed8384b45a Copter: add option to disable LANDING_GEAR 2021-03-17 10:41:11 +09:00
Randy Mackay be29b23195 Copter: do-mount-control ignored if no mount
Co-authored-by: srirajshukla <srirajshukla@gmail.com>
Co-authored-by: Yash Vadi <yvadi9274@yahoo.com>
2021-03-16 10:07:16 +09:00
Tom Pittenger 38fd43ac2c Copter: change SRx_ docs value 1 50 2021-03-03 18:17:22 +11:00
Hwurzburg 7d7a7a365d Copter: correct metadata for do_change_speed cmd 2021-02-24 16:06:41 +09:00
Randy Mackay 97c1445bce Copter: ensure send_position_target_global_int alt always absolute 2021-02-15 17:39:07 +11:00
Peter Barker ea0efd3a1a Copter: correct documentation of use of DO_CHANGE_SPEED parameter 2021-02-15 15:44:17 +11:00
Mark Whitehorn f405454aba Copter: add nullptr checks for get_frame_string
fix rebase errors
2021-02-09 12:43:53 +11:00
Mark Whitehorn cb687a6fff Copter: move get_frame_string to Motors class 2021-02-09 12:43:53 +11:00
Iampete1 0a23084d43 Copter: move get_frame_mav_type to motors 2021-01-26 11:07:36 +09:00
Peter Barker 65adf5b4a9 ArduCopter: add do_disarm_checks boolean to disarm call
this creates symmetry between arming and disarming, at least as far as
the top-level arm() and disarm() calls are concerned.
2021-01-12 08:48:44 +09:00
murata 5ca7e03eeb Copter: tidy handling of DO_FLIGHT_TERMINATION 2021-01-05 16:48:15 +11:00
Andrew Tridgell abd3ae8f3b Copter: added mavlink reporting of airspeed and wind
when we have EKF3 estimation available
2020-12-11 15:21:41 +11:00
Peter Barker af53f9ce64 Copter: correct compilation when AUTO/RTL are disabled 2020-10-06 11:25:09 +11:00
Andy Piper b8f613c965 Copter: rename ADSB_ENABLED to HAL_ADSB_ENABLED and remove from config 2020-09-22 09:33:51 +10:00
Randy Mackay 2398b5dec4 Copter: guided consumes set-pos-target-local-ned Z-axis as offset from origin 2020-09-01 10:27:18 +10:00
Peter Barker 76e5ae9b41 Copter: move mavlink set-position defines into mavlink library 2020-08-11 09:52:52 +09:00
Peter Barker 66e0afedb2 Copter: correct motor test order parameter description 2020-08-10 09:18:05 +10:00
Michael du Breuil 376494027b Copter: Support higher resolution percent based motor tests 2020-08-09 13:47:48 +10:00
Randy Mackay 54b714a24e Copter: implement send_winch_status 2020-08-07 21:55:07 +09:00
Randy Mackay 925f76c048 Copter: integrate winch changes
includes the following changes
winch_update called at 50hz
removed ability to set winch rate from ch6 tuning
remove wheel encoder
call winch library to log at 10hz
fix winch param prefix
2020-08-07 21:55:07 +09:00
Andy Piper 54c3d07547 Copter: make make/gimbal configurable on a per-board basis 2020-08-04 09:18:14 +10:00
Randy Mackay 30c8d7bf40 Copter: dev option so set-attitude-target thrust field used as thrust 2020-08-01 08:32:23 +09:00
Michael du Breuil 08f8a41ecb Copter: Support DO_LAND_START as an adhoc MAVLink command 2020-07-17 09:15:05 +09:00
Michael du Breuil c971fe0ca4 Copter: Support MAV_CMD_DO_REPOSITION on COMMAND_INT 2020-07-07 10:34:19 +10:00
Peter Barker b64a34fc38 Copter: add GENERATOR_STATUS to STREAM3 2020-07-03 08:21:42 +09:00
Iampete1 13d6a887fd Copter: align GCS PID with logged 2020-05-19 09:04:16 +10:00
Randy Mackay b32c5a840b Copter: do not send ahrs3 mavlink message 2020-04-22 14:11:17 +09:00
Peter Barker bf79c49c23 ArduCopter: remove comment for already-removed in-delay-callback function
These are now attached to completely unrelated functions, which is
pretty bad.
2020-04-16 15:11:35 +09:00
Randy Mackay 255c5d4126 Copter: set-pos-target-global-int fails sooner if accel given
same change for set-position-target-local-ned processing
2020-03-02 14:26:33 +09:00
Randy Mackay b21ecda76f Copter: fix guided mode handling of terrain altitudes 2020-03-02 14:26:33 +09:00
Peter Barker ce5f23810b ArduCopter: log disarm method 2020-02-22 12:16:29 +11:00
Randy Mackay d04c86be1e Copter: minor format changes to GCS_MAVlink.cpp 2020-02-17 14:42:49 +09:00
Sachchit Vekaria f6125b26e8 Copter: Allowing Terrain Following in Guided Mode
Uses frame type of MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT message to decide the value of terrain_alt boolean.
2020-02-17 14:42:42 +09:00