Mirror/ardupilot
5
0
Fork 0
mirror of https://github.com/ArduPilot/ardupilot synced 2025-01-03 06:28:27 -04:00
Code Issues Packages Projects Releases Wiki Activity

Update hwdef.dat

Browse Source 
Moving serial port parameters from default.parm. Minor tidying. Current version is compiled and tested on physical hw.
This commit is contained in:
Jani Hirvinen 2024-11-19 21:42:59 +02:00 committed by GitHub
parent f5c72f5fc7
commit de77662fe2
No known key found for this signature in database
GPG Key ID: B5690EEEBB952194
1 changed files with 22 additions and 19 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

31
libraries/AP_HAL_ChibiOS/hwdef/HAKRCF405Wing/hwdef.dat
View File

@ -3,7 +3,7 @@
#
# Board : HAKRCF405-Wing, v1.1
# Created by : Jani Hirvinen https://github.com/jpkh
# Version : v1.1, 16.11.2024
# Version : v1.2, 19.11.2024
#
#######################################
@ -41,7 +41,6 @@ define CH_CFG_ST_RESOLUTION 32
USB_STRING_MANUFACTURER "HakRC"
USB_STRING_PRODUCT "HAKF405Wing v1.0"
# SPI devices
# SPI1 (IMU)
@ -59,7 +58,6 @@ PB3 SPI3_SCK SPI3
PB5 SPI3_MOSI SPI3
PB4 SPI3_MISO SPI3
# Chip select pins
PC14 SDCARD_CS CS
PB12 OSD1_CS CS
@ -81,32 +79,35 @@ PA12 OTG_FS_DP OTG1
# USART1 (RCIN ELRS)
PA10 USART1_RX USART1 # NODMA
PA9 USART1_TX USART1 # NODMA
DEFAULT_SERIAL1_PROTOCOL SerialProtocol_RCIN
define DEFAULT_SERIAL1_PROTOCOL SerialProtocol_RCIN
define DEFAULT_SERIAL1_BAUD 115
# USART2 TELEMETRY)
PA3 USART2_RX USART2 # NODMA
PA2 USART2_TX USART2 # NODMA
DEFAULT_SERIAL2_PROTOCOL SerialProtocol_None
define DEFAULT_SERIAL2_PROTOCOL SerialProtocol_None
define DEFAULT_SERIAL2_BAUD 57
# USART3 (GPS)
PC11 USART3_RX USART3
PC10 USART3_TX USART3
DEFAULT_SERIAL3_PROTOCOL SerialProtocol_GPS
define DEFAULT_SERIAL3_PROTOCOL SerialProtocol_MAVLink2
define DEFAULT_SERIAL3_BAUD 57
# UART4
PA1 UART4_RX UART4 NODMA
PA0 UART4_TX UART4 NODMA
DEFAULT_SERIAL4_PROTOCOL SerialProtocol_None
define DEFAULT_SERIAL4_PROTOCOL SerialProtocol_DJI_FPV
# UART5
PD2 UART5_RX UART5 NODMA
PC12 UART5_TX UART5 NODMA
DEFAULT_SERIAL5_PROTOCOL SerialProtocol_None
define DEFAULT_SERIAL5_PROTOCOL SerialProtocol_None
# USART6
PC7 USART6_RX USART6
PC6 USART6_TX USART6
DEFAULT_SERIAL6_PROTOCOL SerialProtocol_None
define DEFAULT_SERIAL6_PROTOCOL SerialProtocol_None
define HAL_USE_I2C TRUE
define STM32_I2C_USE_I2C1 TRUE
@ -123,7 +124,9 @@ PB9 I2C1_SDA I2C1
BARO SPL06 I2C:0:0x76 # Mostly used baro sensor
#BARO BMP280 I2C:0:0x76 # Not usually used but can be on some of the boards.
# Servos
# Battery monitor
# Generic settings for the battery monitor
define HAL_BATT_MONITOR_DEFAULT 4
# ADC ports
# ADC1
@ -144,7 +147,7 @@ define HAL_BATT_CURR_PIN 13
define HAL_BATT_CURR_SCALE 100.00
define HAL_BATT_VOLT_PIN 11
define HAL_BATT_VOLT_SCALE 10.974
define HAL_BATT_VOLT_SCALE 550
# MOTORS
PB7 TIM4_CH2 TIM4 PWM(1) GPIO(50) # M1
@ -156,18 +159,18 @@ PC9 TIM8_CH4 TIM8 PWM(6) GPIO(55) # M6
PB10 TIM2_CH3 TIM2 PWM(9) GPIO(56) # M7
PB11 TIM2_CH4 TIM2 PWM(10) GPIO(57) # M8
# Servos
PA15 TIM2_CH1 TIM2 PWM(8) GPIO(58) # Servo1
PB14 TIM8_CH2N TIM8 PWM(7) GPIO(59) # Servo2
PB15 TIM1_CH3N TIM1 PWM(11) GPIO(60) # Servo3
# LEDs
# LED1 PC14, LED0 PC15
PA14 LED0 OUTPUT LOW GPIO(0)
PA13 LED1 OUTPUT LOW GPIO(1)
define HAL_GPIO_A_LED_PIN 0
define HAL_GPIO_B_LED_PIN 1
define AP_NOTIFY_GPIO_LED_2_ENABLED 1
# LED Strip, PA8, Not defined yet
PA8 TIM1_CH1 TIM1 PWM(12) GPIO(61)
@ -198,7 +201,7 @@ ROMFS_WILDCARD libraries/AP_OSD/fonts/font*.bin
# IMU setup
# IMU on top side of the PCB, ICM marker pointing towards back.
IMU Invensensev3 SPI:imu1 ROTATION_ROLL_180_YAW_270
DMA_PRIORITY TIM3* TIM2* TIM8_UP SPI1* TIM1_UP
DMA_PRIORITY TIM4* TIM3* TIM8 SPI1*
# no built-in compass, but probe the i2c bus for all possible
# external compass types