mirror of https://github.com/ArduPilot/ardupilot
Tracker: 4.5.6-beta1 release notes
This commit is contained in:
parent
988d50fd9b
commit
bedf3b4c41
|
@ -1,5 +1,33 @@
|
|||
Antenna Tracker Release Notes:
|
||||
------------------------------------------------------------------
|
||||
Release 4.5.6-beta1 20 Aug 2024
|
||||
|
||||
Changes from 4.5.5
|
||||
|
||||
1) Board specific enhancements and bug fixes
|
||||
|
||||
- 3DR Control Zero H7 Rev G support
|
||||
- CUAV-7-Nano support
|
||||
- FoxeerF405v2 servo outputs increased from 9 to 11
|
||||
- Holybro Pixhawk6C hi-power peripheral overcurrent reporting fixed
|
||||
- iFlight 2RAW H7 support
|
||||
- MFT-SEMA100 support
|
||||
- TMotorH743 support BMI270 baro
|
||||
- ZeroOneX6 support
|
||||
|
||||
2) Minor enhancements and bug fixes
|
||||
|
||||
- Cameras using MAVLink report vendor and model name correctly
|
||||
- DroneCAN fix to remove occasional NodeID registration error
|
||||
- GPS NMEA and GSoF driver ground course corrected (now always 0 ~ 360 deg)
|
||||
- ICP101XX barometer slowed to avoid I2C communication errors
|
||||
- IMU temp cal param (INSn_ACCSCAL_Z) stored correctly when bootloader is flashed
|
||||
- IMU gyro/accel duplicate id registration fixed to avoid possible pre-arm failure
|
||||
- Logging to flash timestamp fix
|
||||
- OSD displays ESC temp instead of motor temp
|
||||
- PID controller error calculation bug fix (was using target from prev iteration)
|
||||
- Relay on MAIN pins fixed
|
||||
------------------------------------------------------------------
|
||||
Release 4.5.5 1st Aug 2024
|
||||
|
||||
No changes from 4.5.5-beta2
|
||||
|
|
Loading…
Reference in New Issue