ardupilot/libraries/AP_HAL_ChibiOS/hwdef/MazzyStarDrone/hwdef-bl.dat

48 lines
946 B
Plaintext
Raw Normal View History

# hw definition file for processing by chibios_pins.py
# for Mazzy Star Drone bootloader
# MCU class and specific type
MCU STM32F7xx STM32F745xx
# board ID for firmware load
APJ_BOARD_ID 188
# crystal frequency, setup to use external oscillator
OSCILLATOR_HZ 8000000
define STM32_LSECLK 32768U
define STM32_LSEDRV (3U << 3U)
define STM32_PLLSRC STM32_PLLSRC_HSE
define STM32_PLLM_VALUE 8
define STM32_PLLN_VALUE 432
define STM32_PLLP_VALUE 2
define STM32_PLLQ_VALUE 9
FLASH_SIZE_KB 1024
# bootloader starts at zero offset
FLASH_RESERVE_START_KB 0
# the location where the bootloader will put the firmware
FLASH_BOOTLOADER_LOAD_KB 96
# board voltage
STM32_VDD 330U
# order of UARTs (and USB)
SERIAL_ORDER OTG1
# PA10 IO-debug-console
PA11 OTG_FS_DM OTG1
PA12 OTG_FS_DP OTG1
PA13 JTMS-SWDIO SWD
PA14 JTCK-SWCLK SWD
PA2 LED_BOOTLOADER OUTPUT LOW
define HAL_LED_ON 0
define HAL_USE_EMPTY_STORAGE 1
define HAL_STORAGE_SIZE 16384