ardupilot/libraries/AP_RangeFinder/AP_RangeFinder_LeddarVu8.h

93 lines
3.6 KiB
C
Raw Normal View History

2020-01-13 01:48:57 -04:00
#pragma once
#include "AP_RangeFinder.h"
#include "AP_RangeFinder_Backend_Serial.h"
#define LEDDARVU8_PAYLOAD_LENGTH (8*2)
class AP_RangeFinder_LeddarVu8 : public AP_RangeFinder_Backend_Serial
{
public:
using AP_RangeFinder_Backend_Serial::AP_RangeFinder_Backend_Serial;
protected:
// baudrate used during object construction:
uint32_t initial_baudrate(uint8_t serial_instance) const override {
return 115200;
}
// return sensor type as laser
MAV_DISTANCE_SENSOR _get_mav_distance_sensor_type() const override {
return MAV_DISTANCE_SENSOR_LASER;
}
// get a reading, distance returned in reading_cm
bool get_reading(float &reading_m) override;
2020-01-13 01:48:57 -04:00
// maximum time between readings before we change state to NoData:
uint16_t read_timeout_ms() const override { return 500; }
2020-01-13 01:48:57 -04:00
private:
// function codes
enum class FunctionCode : uint8_t {
READ_HOLDING_REGISTER = 0x03,
READ_INPUT_REGISTER = 0x04,
WRITE_HOLDING_REGISTER = 0x06,
WRITE_MULTIPLE_REGISTER = 0x10,
READ_WRITE_MULTIPLE_REGISTER = 0x17
};
// register numbers for reading input registers
enum class RegisterNumber : uint8_t {
REGISTER_STATUS = 1, // 0 = detections not ready, 1 = ready
NUMBER_OF_SEGMENTS = 2,
NUMBER_OF_DETECTIONS = 11,
PERCENTAGE_OF_LIGHT_SOURCE_POWER = 12,
TIMESTAMP_LOW = 14,
TIMESTAMP_HIGH = 15,
FIRST_DISTANCE0 = 16, // distance of first detection for 1st segment, zero if no detection
FIRST_AMPLITUDE0 = 24, // amplitude of first detection * 64 for 1st segment
FIRST_FLAG0 = 32, // flags of first detection for 1st segment. Bit0:Valid, Bit1:Result of object demerging, Bit2:Reserved, Bit3:Saturated
// registers exist for distance, amplitude and flags for subsequent detections but are not used in this driver
};
// parsing state
enum class ParseState : uint8_t {
WAITING_FOR_ADDRESS,
WAITING_FOR_FUNCTION_CODE,
WAITING_FOR_PAYLOAD_LEN,
WAITING_FOR_PAYLOAD,
WAITING_FOR_CRC_LOW,
WAITING_FOR_CRC_HIGH,
};
// get sensor address from RNGFNDx_ADDR parameter
uint8_t get_sensor_address() const;
// send request to device to provide distances
void request_distances();
// process one byte received on serial port
// returns true if successfully parsed a message
// if distances are valid, valid_readings is set to true and distance is stored in reading_cm
bool parse_byte(uint8_t b, bool &valid_reading, uint16_t &reading_cm);
// structure holding latest message contents
// the order of fields matches the incoming message so it can be used to calculate the crc
struct PACKED {
uint8_t address; // device address (required for calculating crc)
uint8_t function_code; // function code (always 0x04 but required for calculating crc)
uint8_t payload_len; // message payload length
uint8_t payload[LEDDARVU8_PAYLOAD_LENGTH]; // payload
uint16_t crc; // latest message's crc
uint16_t payload_recv; // number of message's payload bytes received so far
ParseState state; // state of incoming message processing
} parsed_msg;
uint32_t last_distance_ms; // system time of last successful distance sensor read
uint32_t last_distance_request_ms; // system time of last request to sensor to send distances
};