ardupilot/libraries/AP_Devo_Telem/AP_Devo_Telem.cpp

/*
   This program is free software: you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation, either version 3 of the License, or
   (at your option) any later version.

   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

/*
   DEVO Telemetry library
*/



#include "AP_Devo_Telem.h"

#if AP_DEVO_TELEM_ENABLED

#include <AP_AHRS/AP_AHRS.h>
#include <AP_GPS/AP_GPS.h>
#include <AP_BattMonitor/AP_BattMonitor.h>
#include <GCS_MAVLink/GCS.h>

#define DEVOM_SYNC_BYTE        0xAA
#define AP_SERIALMANAGER_DEVO_TELEM_BAUD        38400
#define AP_SERIALMANAGER_DEVO_BUFSIZE_RX        0
#define AP_SERIALMANAGER_DEVO_BUFSIZE_TX        32

extern const AP_HAL::HAL& hal;

void AP_DEVO_Telem::init()
{
    const AP_SerialManager& serial_manager = AP::serialmanager();

    // check for DEVO_DPort
    if ((_port = serial_manager.find_serial(AP_SerialManager::SerialProtocol_Devo_Telem, 0))) {
        _port->set_flow_control(AP_HAL::UARTDriver::FLOW_CONTROL_DISABLE);
        // initialise uart
        _port->begin(AP_SERIALMANAGER_DEVO_TELEM_BAUD, AP_SERIALMANAGER_DEVO_BUFSIZE_RX, AP_SERIALMANAGER_DEVO_BUFSIZE_TX);

        hal.scheduler->register_io_process(FUNCTOR_BIND_MEMBER(&AP_DEVO_Telem::tick, void));
    }
}


uint32_t AP_DEVO_Telem::gpsDdToDmsFormat(int32_t ddm)
{
    int32_t deg = (int32_t)(ddm * 1e-7);
    float mm = (ddm * 1.0e-7 - deg) * 60.0f;

    mm = ((float)deg * 100.0f + mm) /100.0f;

    if ((mm < -180.0f) || (mm > 180.0f)) {
        mm = 0.0f;
    }

    return mm * 1.0e7f;
}


/*
  send_frames - sends updates down telemetry link
  should be called at 1hz
*/

#define DEVO_SPEED_FACTOR 0.0194384f

void AP_DEVO_Telem::send_frames()
{
    // return immediately if not initialised
    if (_port == nullptr) {
        return;
    }

    struct PACKED {
        uint8_t header;                                ///< 0xAA for a valid packet
        int32_t lon;
        int32_t lat;
        int32_t alt;
        int16_t speed;
        int16_t temp;
        int16_t volt;
        uint8_t checksum8;
    } devoPacket{};

    devoPacket.header = DEVOM_SYNC_BYTE;

    const AP_AHRS &_ahrs = AP::ahrs();
    const AP_GPS &gps = AP::gps();
    Location loc;

    if (_ahrs.get_position(loc)) {
        devoPacket.lat = gpsDdToDmsFormat(loc.lat);
        devoPacket.lon = gpsDdToDmsFormat(loc.lng);
        devoPacket.speed = (int16_t)(gps.ground_speed() * DEVO_SPEED_FACTOR * 100.0f);  // * 100 for cm

        /*
          Note that this isn't actually barometric altitude, it is the
          inertial nav estimate of altitude above home.
        */
        float alt;
        _ahrs.get_relative_position_D_home(alt);
        devoPacket.alt = alt * -100.0f; // coordinates was in NED, so it needs to change sign. Protocol requires in cm!
    }



    devoPacket.volt = roundf(AP::battery().voltage() * 10.0f);
    devoPacket.temp = gcs().custom_mode(); // Send mode as temperature

    // emit the packet to the port byte-by-byte, calculating checksum
    // as we go.  Note we are stepping backwards through the structure
    // - presumably to get endianness correct on the entries!
    uint8_t *b = (uint8_t *)&devoPacket;
    for (uint8_t i = sizeof(devoPacket)-1; i !=0; i--) {
        _port->write(b, 1);
        devoPacket.checksum8 += *b++; // Add Checksum
    }
    _port->write(&devoPacket.checksum8, 1);
}

void AP_DEVO_Telem::tick(void)
{
    uint32_t now = AP_HAL::millis();

    if (now - _last_frame_ms > 1000) {
        _last_frame_ms = now;
        send_frames();
    }
}
#endif