/*
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see .
*/
/*
DEVO Telemetry library
*/
#include "AP_Devo_Telem.h"
#if AP_DEVO_TELEM_ENABLED
#include
#include
#include
#include
#define DEVOM_SYNC_BYTE 0xAA
#define AP_SERIALMANAGER_DEVO_TELEM_BAUD 38400
#define AP_SERIALMANAGER_DEVO_BUFSIZE_RX 0
#define AP_SERIALMANAGER_DEVO_BUFSIZE_TX 32
extern const AP_HAL::HAL& hal;
void AP_DEVO_Telem::init()
{
const AP_SerialManager& serial_manager = AP::serialmanager();
// check for DEVO_DPort
if ((_port = serial_manager.find_serial(AP_SerialManager::SerialProtocol_Devo_Telem, 0))) {
_port->set_flow_control(AP_HAL::UARTDriver::FLOW_CONTROL_DISABLE);
// initialise uart
_port->begin(AP_SERIALMANAGER_DEVO_TELEM_BAUD, AP_SERIALMANAGER_DEVO_BUFSIZE_RX, AP_SERIALMANAGER_DEVO_BUFSIZE_TX);
hal.scheduler->register_io_process(FUNCTOR_BIND_MEMBER(&AP_DEVO_Telem::tick, void));
}
}
uint32_t AP_DEVO_Telem::gpsDdToDmsFormat(int32_t ddm)
{
int32_t deg = (int32_t)(ddm * 1e-7);
float mm = (ddm * 1.0e-7 - deg) * 60.0f;
mm = ((float)deg * 100.0f + mm) /100.0f;
if ((mm < -180.0f) || (mm > 180.0f)) {
mm = 0.0f;
}
return mm * 1.0e7f;
}
/*
send_frames - sends updates down telemetry link
should be called at 1hz
*/
#define DEVO_SPEED_FACTOR 0.0194384f
void AP_DEVO_Telem::send_frames()
{
// return immediately if not initialised
if (_port == nullptr) {
return;
}
struct PACKED {
uint8_t header; ///< 0xAA for a valid packet
int32_t lon;
int32_t lat;
int32_t alt;
int16_t speed;
int16_t temp;
int16_t volt;
uint8_t checksum8;
} devoPacket{};
devoPacket.header = DEVOM_SYNC_BYTE;
const AP_AHRS &_ahrs = AP::ahrs();
const AP_GPS &gps = AP::gps();
Location loc;
if (_ahrs.get_position(loc)) {
devoPacket.lat = gpsDdToDmsFormat(loc.lat);
devoPacket.lon = gpsDdToDmsFormat(loc.lng);
devoPacket.speed = (int16_t)(gps.ground_speed() * DEVO_SPEED_FACTOR * 100.0f); // * 100 for cm
/*
Note that this isn't actually barometric altitude, it is the
inertial nav estimate of altitude above home.
*/
float alt;
_ahrs.get_relative_position_D_home(alt);
devoPacket.alt = alt * -100.0f; // coordinates was in NED, so it needs to change sign. Protocol requires in cm!
}
devoPacket.volt = roundf(AP::battery().voltage() * 10.0f);
devoPacket.temp = gcs().custom_mode(); // Send mode as temperature
// emit the packet to the port byte-by-byte, calculating checksum
// as we go. Note we are stepping backwards through the structure
// - presumably to get endianness correct on the entries!
uint8_t *b = (uint8_t *)&devoPacket;
for (uint8_t i = sizeof(devoPacket)-1; i !=0; i--) {
_port->write(b, 1);
devoPacket.checksum8 += *b++; // Add Checksum
}
_port->write(&devoPacket.checksum8, 1);
}
void AP_DEVO_Telem::tick(void)
{
uint32_t now = AP_HAL::millis();
if (now - _last_frame_ms > 1000) {
_last_frame_ms = now;
send_frames();
}
}
#endif