ardupilot/libraries/AP_HAL_ChibiOS/hwdef/QioTekZealotH743/defaults.parm

# setup the heater temperature to 45 degree
BRD_HEAT_TARG 45

# setup serial2 port defaults for ESP8266
SERIAL2_BAUD 921600

# setup the parameter for the two Relays GPIO others for reserve
RELAY1_PIN 1
RELAY2_PIN 2
HAL_ChibiOS: added QioTekZealotH743 support 2021-10-17 19:20:22 -03:00			`# setup the heater temperature to 45 degree`
AP_HAL_ChibiOS: update for renamed BRD_HEAT_ parameters 2021-10-20 07:22:09 -03:00			`BRD_HEAT_TARG 45`
HAL_ChibiOS: added QioTekZealotH743 support 2021-10-17 19:20:22 -03:00
			`# setup serial2 port defaults for ESP8266`
HWDEF: add SLCAN OTG port, correct defaults.param errors 2022-03-28 13:37:39 -03:00			`SERIAL2_BAUD 921600`
HAL_ChibiOS: added QioTekZealotH743 support 2021-10-17 19:20:22 -03:00
			`# setup the parameter for the two Relays GPIO others for reserve`
AP_HAL_ChibiOS: update relay parameter names 2024-06-12 08:51:25 -03:00			`RELAY1_PIN 1`
			`RELAY2_PIN 2`