ardupilot/libraries/AP_RangeFinder/AP_RangeFinder_PWM.cpp

130 lines
3.5 KiB
C++
Raw Normal View History

2018-08-29 11:18:49 -03:00
/*
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "AP_RangeFinder_PWM.h"
#include <AP_HAL/AP_HAL.h>
#include <GCS_MAVLink/GCS.h>
extern const AP_HAL::HAL& hal;
/*
The constructor also initialises the rangefinder.
*/
AP_RangeFinder_PWM::AP_RangeFinder_PWM(RangeFinder::RangeFinder_State &_state,
AP_RangeFinder_Params &_params,
float &_estimated_terrain_height) :
AP_RangeFinder_Backend(_state, _params),
estimated_terrain_height(_estimated_terrain_height)
2018-08-29 11:18:49 -03:00
{
}
/*
There's no sensible way of detecting a PWM rangefinder as the pins are configurable
*/
bool AP_RangeFinder_PWM::detect()
{
return true;
}
// read - return last value measured by sensor
bool AP_RangeFinder_PWM::get_reading(uint16_t &reading_cm)
{
const uint32_t value_us = pwm_source.get_pwm_avg_us();
if (value_us == 0) {
2018-08-29 11:18:49 -03:00
return false;
}
reading_cm = value_us/10; // correct for LidarLite. Parameter needed? Converts from decimetres -> cm here
2018-08-29 11:18:49 -03:00
return true;
}
bool AP_RangeFinder_PWM::check_pin()
2018-08-29 11:18:49 -03:00
{
if (!pwm_source.set_pin(params.pin, "RangeFinder_PWM")) {
return false;
2018-08-29 11:18:49 -03:00
}
return true;
2018-08-29 11:18:49 -03:00
}
void AP_RangeFinder_PWM::check_stop_pin()
{
if (params.stop_pin == last_stop_pin) {
return;
}
hal.gpio->pinMode(params.stop_pin, HAL_GPIO_OUTPUT);
last_stop_pin = params.stop_pin;
}
bool AP_RangeFinder_PWM::check_pins()
{
check_stop_pin();
return check_pin();
}
2018-08-29 11:18:49 -03:00
/*
update the state of the sensor
*/
void AP_RangeFinder_PWM::update(void)
{
// check if pin has changed and configure interrupt handlers if required:
if (!check_pins()) {
2018-08-29 11:18:49 -03:00
return;
}
if (params.stop_pin != -1) {
const bool oor = out_of_range();
if (oor) {
if (!was_out_of_range) {
// we are above the power saving range. Disable the sensor
hal.gpio->write(params.stop_pin, false);
set_status(RangeFinder::Status::NoData);
state.distance_cm = 0;
state.voltage_mv = 0;
was_out_of_range = oor;
}
return;
}
// re-enable the sensor:
if (!oor && was_out_of_range) {
hal.gpio->write(params.stop_pin, true);
was_out_of_range = oor;
}
}
2018-08-29 11:18:49 -03:00
if (!get_reading(state.distance_cm)) {
// failure; consider changing our state
if (AP_HAL::millis() - state.last_reading_ms > 200) {
set_status(RangeFinder::Status::NoData);
2018-08-29 11:18:49 -03:00
}
return;
}
// add offset
state.distance_cm += params.offset;
2018-08-29 11:18:49 -03:00
// update range_valid state based on distance measured
state.last_reading_ms = AP_HAL::millis();
update_status();
}
// return true if we are beyond the power saving range
bool AP_RangeFinder_PWM::out_of_range(void) const {
return params.powersave_range > 0 && estimated_terrain_height > params.powersave_range;
}