ardupilot/libraries/AP_HAL_ChibiOS/hwdef/mRoX21-777/hwdef-bl.dat

67 lines
1.4 KiB
Plaintext
Raw Normal View History

# hwdef for bootloader for mRoX21-777
# The X2.1-777 is a member of the X2.1 flight controller from Mayan Robotics (mRo) www.mrobotics.io
# Introduced in October 2018
# Designed by Nikolay Arsov, Phillip Kocmoud, and Jordi Munoz
# with a STM32F777VIT6 MCU
# and STM32F103C8T6 IO MCU
# MCU class and specific type
MCU STM32F7xx STM32F777xx
# crystal frequency
OSCILLATOR_HZ 24000000
# board ID for firmware load
APJ_BOARD_ID 136
# flash size
FLASH_SIZE_KB 2048
# USB setup
USB_STRING_MANUFACTURER "mRo"
# order of UARTs (and USB)
SERIAL_ORDER OTG1 USART2 USART3 UART7
PD5 USART2_TX USART2
PD6 USART2_RX USART2
PD3 USART2_CTS USART2
PD4 USART2_RTS USART2
# the telem2 USART, also with RTS/CTS available
# USART3 serial3 telem2
PD8 USART3_TX USART3
PD9 USART3_RX USART3
PD11 USART3_CTS USART3
PD12 USART3_RTS USART3
PE7 UART7_RX UART7
PE8 UART7_TX UART7
# define a LED
PE12 LED_BOOTLOADER OUTPUT
define HAL_LED_ON 1
# now we define the pins that USB is connected on
PA11 OTG_FS_DM OTG1
PA12 OTG_FS_DP OTG1
# these are the pins for SWD debugging with a STlinkv2 or black-magic probe
PA13 JTMS-SWDIO SWD
PA14 JTCK-SWCLK SWD
# no reserved flash for bootloader
FLASH_RESERVE_START_KB 0
# start on 4th sector (1st sector for bootloader, 2 for extra storage)
FLASH_BOOTLOADER_LOAD_KB 96
# Add CS pins to ensure they are high in bootloader
PC1 MAG_CS CS #Not Connected
PC2 MPU_CS CS #MPU9250
PC15 ACCEL_CS CS #MPU20602
PD7 BARO_CS CS #MS5611
PD10 FRAM_CS CS SPEED_VERYLOW