ardupilot/libraries/APO/AP_Controller.cpp

/*
 * AP_Controller.cpp
 *
 *  Created on: Apr 30, 2011
 *      Author: jgoppert
 */

#include "AP_Controller.h"
#include "../FastSerial/FastSerial.h"
#include "AP_ArmingMechanism.h"
#include "AP_BatteryMonitor.h"
#include "AP_HardwareAbstractionLayer.h"
#include "../AP_Common/include/menu.h"
#include "AP_RcChannel.h"
#include "../GCS_MAVLink/include/mavlink_types.h"
#include "constants.h"
#include "AP_CommLink.h"

namespace apo {

AP_Controller::AP_Controller(AP_Navigator * nav, AP_Guide * guide,
		AP_HardwareAbstractionLayer * hal, AP_ArmingMechanism * armingMechanism,
		const uint8_t chMode, const uint16_t key, const prog_char_t * name) :
		_nav(nav), _guide(guide), _hal(hal), _armingMechanism(armingMechanism),
		_group(key, name ? : PSTR("CNTRL_")),
		_chMode(chMode),
		_mode(&_group, 1, MAV_MODE_LOCKED, PSTR("MODE")) {
	setAllRadioChannelsToNeutral();
}

void AP_Controller::setAllRadioChannelsToNeutral() {
	for (uint8_t i = 0; i < _hal->rc.getSize(); i++) {
		_hal->rc[i]->setPosition(0.0);
	}
}

void AP_Controller::setAllRadioChannelsManually() {
	for (uint8_t i = 0; i < _hal->rc.getSize(); i++) {
		_hal->rc[i]->setUsingRadio();
	}
}

void AP_Controller::update(const float dt) {
	if (_armingMechanism) _armingMechanism->update(dt);

	// determine flight mode
	//
	// check for heartbeat from gcs, if not found go to failsafe
	if (_hal->heartBeatLost()) {
		_mode = MAV_MODE_FAILSAFE;
		_hal->gcs->sendText(SEVERITY_HIGH, PSTR("configure gcs to send heartbeat"));
	// if battery less than 5%, go to failsafe
	} else if (_hal->batteryMonitor && _hal->batteryMonitor->getPercentage() < 5) {
		_mode = MAV_MODE_FAILSAFE;
		_hal->gcs->sendText(SEVERITY_HIGH, PSTR("recharge battery"));
	// manual/auto switch
	} else {
		// if all emergencies cleared, fall back to standby
		if (_hal->getState()==MAV_STATE_EMERGENCY) _hal->setState(MAV_STATE_STANDBY);
		if (_hal->rc[_chMode]->getRadioPosition() > 0) _mode = MAV_MODE_MANUAL;
		else _mode = MAV_MODE_AUTO;
	}

	// handle flight modes
	switch(_mode) {

		case MAV_MODE_LOCKED: {
			_hal->setState(MAV_STATE_STANDBY);
			break;
		}

		case MAV_MODE_FAILSAFE: {
			_hal->setState(MAV_STATE_EMERGENCY);
			break;
		}

		case MAV_MODE_MANUAL: {
			manualLoop(dt);
			break;
		}

		case MAV_MODE_AUTO: {
			autoLoop(dt);
			break;
		}

		default: {
			_hal->gcs->sendText(SEVERITY_HIGH, PSTR("unknown mode"));
			_hal->setState(MAV_STATE_EMERGENCY);
		}
	}

	// this sends commands to motors
	setMotors();
}

} // namespace apo