ardupilot/ArduCopter/events.pde

327 lines
11 KiB
Plaintext
Raw Normal View History

// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-
/*
2012-08-16 21:50:02 -03:00
* This event will be called when the failsafe changes
* boolean failsafe reflects the current state
*/
static void failsafe_radio_on_event()
{
2012-11-13 10:43:54 -04:00
// if motors are not armed there is nothing to do
if( !motors.armed() ) {
return;
}
2012-08-16 21:50:02 -03:00
// This is how to handle a failsafe.
switch(control_mode) {
case STABILIZE:
case ACRO:
// if throttle is zero OR vehicle is landed disarm motors
if (ap.throttle_zero || ap.land_complete) {
init_disarm_motors();
// if failsafe_throttle is FS_THR_ENABLED_ALWAYS_LAND then land immediately
}else if(g.failsafe_throttle == FS_THR_ENABLED_ALWAYS_LAND) {
set_mode_land_with_pause();
// if far from home then RTL
}else if(home_distance > wp_nav.get_wp_radius()) {
if (!set_mode(RTL)) {
set_mode_land_with_pause();
}
// We have no GPS or are very close to home so we will land
}else{
set_mode_land_with_pause();
}
break;
case AUTO:
// if mission has not started AND vehicle is landed, disarm motors
if (!ap.auto_armed && ap.land_complete) {
init_disarm_motors();
// if failsafe_throttle is FS_THR_ENABLED_ALWAYS_LAND then land immediately
} else if(g.failsafe_throttle == FS_THR_ENABLED_ALWAYS_LAND) {
set_mode_land_with_pause();
// if failsafe_throttle is FS_THR_ENABLED_ALWAYS_RTL do RTL
} else if (g.failsafe_throttle == FS_THR_ENABLED_ALWAYS_RTL) {
if(home_distance > wp_nav.get_wp_radius()) {
if (!set_mode(RTL)) {
set_mode_land_with_pause();
}
}else{
// We are very close to home so we will land
set_mode_land_with_pause();
}
}
// failsafe_throttle must be FS_THR_ENABLED_CONTINUE_MISSION so no need to do anything
break;
case LAND:
// continue to land if battery failsafe is also active otherwise fall through to default handling
if (g.failsafe_battery_enabled == FS_BATT_LAND && failsafe.battery) {
break;
}
// no break
default:
// used for AltHold, Guided, Loiter, RTL, Circle, OF_Loiter, Drift, Sport, Flip, Autotune, PosHold
// if landed disarm
if (ap.land_complete) {
init_disarm_motors();
// if failsafe_throttle is FS_THR_ENABLED_ALWAYS_LAND then land immediately
} else if(g.failsafe_throttle == FS_THR_ENABLED_ALWAYS_LAND) {
set_mode_land_with_pause();
// if far from home then RTL
}else if(home_distance > wp_nav.get_wp_radius()) {
if (!set_mode(RTL)){
// if RTL fails because of no GPS, then LAND
set_mode_land_with_pause();
}
}else{
// We have no GPS or are very close to home so we will land
set_mode_land_with_pause();
}
break;
2012-08-16 21:50:02 -03:00
}
// log the error to the dataflash
Log_Write_Error(ERROR_SUBSYSTEM_FAILSAFE_RADIO, ERROR_CODE_FAILSAFE_OCCURRED);
}
// failsafe_off_event - respond to radio contact being regained
// we must be in AUTO, LAND or RTL modes
// or Stabilize or ACRO mode but with motors disarmed
static void failsafe_radio_off_event()
{
// no need to do anything except log the error as resolved
// user can now override roll, pitch, yaw and throttle and even use flight mode switch to restore previous flight mode
Log_Write_Error(ERROR_SUBSYSTEM_FAILSAFE_RADIO, ERROR_CODE_FAILSAFE_RESOLVED);
}
static void failsafe_battery_event(void)
{
2013-10-01 10:34:44 -03:00
// return immediately if low battery event has already been triggered
if (failsafe.battery) {
2013-10-01 10:34:44 -03:00
return;
}
2012-11-13 10:43:54 -04:00
// failsafe check
if (g.failsafe_battery_enabled != FS_BATT_DISABLED && motors.armed()) {
2012-11-13 10:43:54 -04:00
switch(control_mode) {
case STABILIZE:
case ACRO:
// if throttle is zero OR vehicle is landed disarm motors
if (ap.throttle_zero || ap.land_complete) {
2012-11-13 10:43:54 -04:00
init_disarm_motors();
}else{
// set mode to RTL or LAND
if (g.failsafe_battery_enabled == FS_BATT_RTL && home_distance > wp_nav.get_wp_radius()) {
if (!set_mode(RTL)) {
set_mode_land_with_pause();
}
}else{
set_mode_land_with_pause();
}
2012-11-13 10:43:54 -04:00
}
break;
case AUTO:
// if mission has not started AND vehicle is landed, disarm motors
if (!ap.auto_armed && ap.land_complete) {
init_disarm_motors();
// set mode to RTL or LAND
} else if (home_distance > wp_nav.get_wp_radius()) {
if (!set_mode(RTL)) {
set_mode_land_with_pause();
}
} else {
set_mode_land_with_pause();
}
break;
default:
// used for AltHold, Guided, Loiter, RTL, Circle, OF_Loiter, Drift, Sport, Flip, Autotune, PosHold
// if landed disarm
if (ap.land_complete) {
init_disarm_motors();
// set mode to RTL or LAND
} else if (g.failsafe_battery_enabled == FS_BATT_RTL && home_distance > wp_nav.get_wp_radius()) {
if (!set_mode(RTL)) {
set_mode_land_with_pause();
}
} else {
set_mode_land_with_pause();
}
2012-11-13 10:43:54 -04:00
break;
}
}
2012-11-13 10:43:54 -04:00
// set the low battery flag
set_failsafe_battery(true);
2012-11-13 10:43:54 -04:00
// warn the ground station and log to dataflash
gcs_send_text_P(SEVERITY_HIGH,PSTR("Low Battery!"));
Log_Write_Error(ERROR_SUBSYSTEM_FAILSAFE_BATT, ERROR_CODE_FAILSAFE_OCCURRED);
}
// failsafe_gps_check - check for gps failsafe
static void failsafe_gps_check()
{
uint32_t last_gps_update_ms;
// return immediately if gps failsafe is disabled or we have never had GPS lock
if (g.failsafe_gps_enabled == FS_GPS_DISABLED || !ap.home_is_set) {
// if we have just disabled the gps failsafe, ensure the gps failsafe event is cleared
if (failsafe.gps) {
failsafe_gps_off_event();
set_failsafe_gps(false);
}
return;
}
// calc time since last gps update
last_gps_update_ms = millis() - gps_glitch.last_good_update();
// check if all is well
if( last_gps_update_ms < FAILSAFE_GPS_TIMEOUT_MS) {
// check for recovery from gps failsafe
if( failsafe.gps ) {
failsafe_gps_off_event();
set_failsafe_gps(false);
}
return;
}
// do nothing if gps failsafe already triggered or motors disarmed
if( failsafe.gps || !motors.armed()) {
return;
}
// GPS failsafe event has occured
// update state, warn the ground station and log to dataflash
set_failsafe_gps(true);
gcs_send_text_P(SEVERITY_HIGH,PSTR("Lost GPS!"));
Log_Write_Error(ERROR_SUBSYSTEM_FAILSAFE_GPS, ERROR_CODE_FAILSAFE_OCCURRED);
// take action based on flight mode and FS_GPS_ENABLED parameter
if (mode_requires_GPS(control_mode) || g.failsafe_gps_enabled == FS_GPS_LAND_EVEN_STABILIZE) {
if (g.failsafe_gps_enabled == FS_GPS_ALTHOLD && !failsafe.radio) {
set_mode(ALT_HOLD);
}else{
set_mode_land_with_pause();
}
}
// if flight mode is LAND ensure it's not the GPS controlled LAND
if (control_mode == LAND) {
land_do_not_use_GPS();
}
}
// failsafe_gps_off_event - actions to take when GPS contact is restored
static void failsafe_gps_off_event(void)
{
// log recovery of GPS in logs?
Log_Write_Error(ERROR_SUBSYSTEM_FAILSAFE_GPS, ERROR_CODE_FAILSAFE_RESOLVED);
}
2013-04-29 09:30:22 -03:00
// failsafe_gcs_check - check for ground station failsafe
static void failsafe_gcs_check()
{
uint32_t last_gcs_update_ms;
// return immediately if gcs failsafe is disabled, gcs has never been connected or we are not overriding rc controls from the gcs
if( g.failsafe_gcs == FS_GCS_DISABLED || failsafe.last_heartbeat_ms == 0 || !failsafe.rc_override_active) {
2013-04-29 09:30:22 -03:00
return;
}
// calc time since last gcs update
last_gcs_update_ms = millis() - failsafe.last_heartbeat_ms;
2013-04-29 09:30:22 -03:00
// check if all is well
if( last_gcs_update_ms < FS_GCS_TIMEOUT_MS) {
// check for recovery from gcs failsafe
if (failsafe.gcs) {
2013-04-29 09:30:22 -03:00
failsafe_gcs_off_event();
set_failsafe_gcs(false);
}
return;
}
// do nothing if gcs failsafe already triggered or motors disarmed
if( failsafe.gcs || !motors.armed()) {
2013-04-29 09:30:22 -03:00
return;
}
// GCS failsafe event has occured
// update state, log to dataflash
set_failsafe_gcs(true);
Log_Write_Error(ERROR_SUBSYSTEM_FAILSAFE_GCS, ERROR_CODE_FAILSAFE_OCCURRED);
// clear overrides so that RC control can be regained with radio.
hal.rcin->clear_overrides();
failsafe.rc_override_active = false;
2013-04-29 09:30:22 -03:00
// This is how to handle a failsafe.
// use the throttle failsafe setting to decide what to do
switch(control_mode) {
case STABILIZE:
case ACRO:
2013-08-04 03:56:35 -03:00
case SPORT:
2013-04-29 09:30:22 -03:00
// if throttle is zero disarm motors
if (ap.throttle_zero) {
2013-04-29 09:30:22 -03:00
init_disarm_motors();
}else if(home_distance > wp_nav.get_wp_radius()) {
if (!set_mode(RTL)) {
set_mode_land_with_pause();
}
2013-04-29 09:30:22 -03:00
}else{
// We have no GPS or are very close to home so we will land
set_mode_land_with_pause();
2013-04-29 09:30:22 -03:00
}
break;
case AUTO:
// if g.failsafe_gcs is 1 do RTL, 2 means continue with the mission
if (g.failsafe_gcs == FS_GCS_ENABLED_ALWAYS_RTL) {
if (home_distance > wp_nav.get_wp_radius()) {
if (!set_mode(RTL)) {
set_mode_land_with_pause();
}
2013-04-29 09:30:22 -03:00
}else{
// We are very close to home so we will land
set_mode_land_with_pause();
2013-04-29 09:30:22 -03:00
}
}
// if failsafe_throttle is 2 (i.e. FS_THR_ENABLED_CONTINUE_MISSION) no need to do anything
break;
default:
if(home_distance > wp_nav.get_wp_radius()) {
if (!set_mode(RTL)) {
set_mode_land_with_pause();
}
2013-04-29 09:30:22 -03:00
}else{
// We have no GPS or are very close to home so we will land
set_mode_land_with_pause();
2013-04-29 09:30:22 -03:00
}
break;
}
}
// failsafe_gcs_off_event - actions to take when GCS contact is restored
2013-04-29 09:30:22 -03:00
static void failsafe_gcs_off_event(void)
{
// log recovery of GCS in logs?
2013-04-29 09:30:22 -03:00
Log_Write_Error(ERROR_SUBSYSTEM_FAILSAFE_GCS, ERROR_CODE_FAILSAFE_RESOLVED);
}
static void update_events()
{
ServoRelayEvents.update_events();
}