ardupilot/libraries/AP_Airspeed/AP_Airspeed_MS5525.cpp

305 lines
8.2 KiB
C++
Raw Normal View History

/*
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/*
backend driver for airspeed from a I2C MS5525D0 sensor
*/
#include "AP_Airspeed_MS5525.h"
#if AP_AIRSPEED_MS5525_ENABLED
#include <stdio.h>
#include <utility>
#include <AP_Common/AP_Common.h>
#include <AP_HAL/AP_HAL.h>
#include <AP_HAL/I2CDevice.h>
#include <AP_HAL/utility/sparse-endian.h>
#include <AP_Math/AP_Math.h>
2019-04-24 03:52:34 -03:00
#include <AP_Math/crc.h>
#include <GCS_MAVLink/GCS.h>
extern const AP_HAL::HAL &hal;
#define MS5525D0_I2C_ADDR_1 0x76
#define MS5525D0_I2C_ADDR_2 0x77
#define REG_RESET 0x1E
#define REG_CONVERT_D1_OSR_256 0x40
#define REG_CONVERT_D1_OSR_512 0x42
#define REG_CONVERT_D1_OSR_1024 0x44
#define REG_CONVERT_D1_OSR_2048 0x46
#define REG_CONVERT_D1_OSR_4096 0x48
#define REG_CONVERT_D2_OSR_256 0x50
#define REG_CONVERT_D2_OSR_512 0x52
#define REG_CONVERT_D2_OSR_1024 0x54
#define REG_CONVERT_D2_OSR_2048 0x56
#define REG_CONVERT_D2_OSR_4096 0x58
#define REG_ADC_READ 0x00
#define REG_PROM_BASE 0xA0
// go for 1024 oversampling. This should be fast enough to reduce
// noise but low enough to keep self-heating small
#define REG_CONVERT_PRESSURE REG_CONVERT_D1_OSR_1024
#define REG_CONVERT_TEMPERATURE REG_CONVERT_D2_OSR_1024
AP_Airspeed_MS5525::AP_Airspeed_MS5525(AP_Airspeed &_frontend, uint8_t _instance, MS5525_ADDR address) :
AP_Airspeed_Backend(_frontend, _instance)
{
_address = address;
}
// probe and initialise the sensor
bool AP_Airspeed_MS5525::init()
{
const uint8_t addresses[] = { MS5525D0_I2C_ADDR_1, MS5525D0_I2C_ADDR_2 };
bool found = false;
for (uint8_t i=0; i<ARRAY_SIZE(addresses); i++) {
if (_address != MS5525_ADDR_AUTO && i != (uint8_t)_address) {
continue;
}
dev = hal.i2c_mgr->get_device(get_bus(), addresses[i]);
if (!dev) {
continue;
}
WITH_SEMAPHORE(dev->get_semaphore());
// lots of retries during probe
dev->set_retries(5);
found = read_prom();
if (found) {
GCS_SEND_TEXT(MAV_SEVERITY_INFO, "MS5525[%u]: Found on bus %u addr 0x%02x", get_instance(), get_bus(), addresses[i]);
break;
}
}
if (!found) {
GCS_SEND_TEXT(MAV_SEVERITY_ERROR, "MS5525[%u]: no sensor found", get_instance());
return false;
}
// Send a command to read temperature first
WITH_SEMAPHORE(dev->get_semaphore());
uint8_t reg = REG_CONVERT_TEMPERATURE;
dev->transfer(&reg, 1, nullptr, 0);
state = 0;
command_send_us = AP_HAL::micros();
dev->set_device_type(uint8_t(DevType::MS5525));
set_bus_id(dev->get_bus_id());
// drop to 2 retries for runtime
dev->set_retries(2);
// read at 80Hz
dev->register_periodic_callback(1000000UL/80U,
FUNCTOR_BIND_MEMBER(&AP_Airspeed_MS5525::timer, void));
return true;
}
/**
* CRC used by MS pressure devices
*/
uint16_t AP_Airspeed_MS5525::crc4_prom(void)
{
2019-04-24 03:52:34 -03:00
return crc_crc4(prom);
}
bool AP_Airspeed_MS5525::read_prom(void)
{
// reset the chip to ensure it has correct prom values loaded
uint8_t reg = REG_RESET;
if (!dev->transfer(&reg, 1, nullptr, 0)) {
return false;
}
hal.scheduler->delay(5);
bool all_zero = true;
for (uint8_t i = 0; i < 8; i++) {
be16_t val;
if (!dev->read_registers(REG_PROM_BASE+i*2, (uint8_t *) &val,
sizeof(uint16_t))) {
return false;
}
prom[i] = be16toh(val);
if (prom[i] != 0) {
all_zero = false;
}
}
if (all_zero) {
return false;
}
/* save the read crc */
const uint16_t crc_read = prom[7] & 0xf;
/* remove CRC byte */
prom[7] &= 0xff00;
uint16_t crc_calc = crc4_prom();
if (crc_read != crc_calc) {
printf("MS5525: CRC mismatch 0x%04x 0x%04x\n", crc_read, crc_calc);
}
return crc_read == crc_calc;
}
/*
read from the ADC
*/
int32_t AP_Airspeed_MS5525::read_adc()
{
uint8_t val[3];
if (!dev->read_registers(REG_ADC_READ, val, 3)) {
return 0;
}
return (val[0] << 16) | (val[1] << 8) | val[2];
}
/*
calculate pressure and temperature
*/
void AP_Airspeed_MS5525::calculate(void)
{
// table for the 001DS part, 1PSI range
const uint8_t Q1 = 15;
const uint8_t Q2 = 17;
const uint8_t Q3 = 7;
const uint8_t Q4 = 5;
const uint8_t Q5 = 7;
const uint8_t Q6 = 21;
float dT = float(D2) - int64_t(prom[5]) * (1L<<Q5);
float TEMP = 2000 + (dT*int64_t(prom[6]))/(1L<<Q6);
float OFF = int64_t(prom[2])*(1L<<Q2) + (int64_t(prom[4])*dT)/(1L<<Q4);
float SENS = int64_t(prom[1])*(1L<<Q1) + (int64_t(prom[3])*dT)/(1L<<Q3);
float P = (float(D1)*SENS/(1L<<21)-OFF)/(1L<<15);
const float PSI_to_Pa = 6894.757f;
float P_Pa = PSI_to_Pa * 1.0e-4 * P;
float Temp_C = TEMP * 0.01;
#if 0
static uint16_t counter;
if (counter++ == 100) {
printf("P=%.6f T=%.2f D1=%d D2=%d\n", P_Pa, Temp_C, D1, D2);
counter=0;
}
#endif
WITH_SEMAPHORE(sem);
pressure_sum += P_Pa;
temperature_sum += Temp_C;
press_count++;
temp_count++;
last_sample_time_ms = AP_HAL::millis();
}
// 80Hz timer
void AP_Airspeed_MS5525::timer()
{
if (AP_HAL::micros() - command_send_us < 10000) {
// we should avoid trying to read the ADC too soon after
// sending the command
return;
}
uint32_t adc_val = read_adc();
if (adc_val == 0) {
// we have either done a read too soon after sending the
// request or we have tried to read the same sample twice. We
// re-send the command now as we don't know what state the
// sensor is in, and we do want to trigger it sending a value,
// which we will discard
if (dev->transfer(&cmd_sent, 1, nullptr, 0)) {
command_send_us = AP_HAL::micros();
}
// when we get adc_val == 0 then then both the current value and
// the next value we read from the sensor are invalid
ignore_next = true;
return;
}
/*
* If read fails, re-initiate a read command for current state or we are
* stuck
*/
if (!ignore_next) {
if (cmd_sent == REG_CONVERT_TEMPERATURE) {
D2 = adc_val;
} else if (cmd_sent == REG_CONVERT_PRESSURE) {
D1 = adc_val;
calculate();
}
}
ignore_next = false;
cmd_sent = (state == 0) ? REG_CONVERT_TEMPERATURE : REG_CONVERT_PRESSURE;
if (!dev->transfer(&cmd_sent, 1, nullptr, 0)) {
// we don't know for sure what state the sensor is in when we
// fail to send the command, so ignore the next response
ignore_next = true;
return;
}
command_send_us = AP_HAL::micros();
state = (state + 1) % 5;
}
// return the current differential_pressure in Pascal
bool AP_Airspeed_MS5525::get_differential_pressure(float &_pressure)
{
WITH_SEMAPHORE(sem);
if ((AP_HAL::millis() - last_sample_time_ms) > 100) {
return false;
}
if (press_count > 0) {
pressure = pressure_sum / press_count;
press_count = 0;
pressure_sum = 0;
}
_pressure = pressure;
return true;
}
// return the current temperature in degrees C, if available
bool AP_Airspeed_MS5525::get_temperature(float &_temperature)
{
WITH_SEMAPHORE(sem);
if ((AP_HAL::millis() - last_sample_time_ms) > 100) {
return false;
}
if (temp_count > 0) {
temperature = temperature_sum / temp_count;
temp_count = 0;
temperature_sum = 0;
}
_temperature = temperature;
return true;
}
#endif // AP_AIRSPEED_MS5525_ENABLED