ardupilot/libraries/AP_Notify/OreoLED_I2C.h

200 lines
7.2 KiB
C
Raw Normal View History

/*
OreoLED I2C driver
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include <AP_HAL/AP_HAL.h>
#include "NotifyDevice.h"
#define OREOLED_NUM_LEDS 4 // maximum number of individual LEDs connected to the oreo led cpu
#define OREOLED_INSTANCE_ALL 0xff // instance number to indicate all LEDs (used for set_rgb and set_macro)
#define OREOLED_BRIGHT 0xff // maximum brightness when flying (disconnected from usb)
#define CUSTOM_HEADER_LENGTH 4 // number of bytes in the custom LED buffer that are used to identify the command
class OreoLED_I2C : public NotifyDevice {
public:
// constuctor
OreoLED_I2C(uint8_t bus, uint8_t theme);
// init - initialised the device
bool init(void) override;
// update - updates device according to timed_updated. Should be
// called at 50Hz
void update() override;
// handle a LED_CONTROL message, by default device ignore message
void handle_led_control(const mavlink_message_t &msg) override;
private:
enum oreoled_pattern {
OREOLED_PATTERN_OFF = 0,
OREOLED_PATTERN_SINE = 1,
OREOLED_PATTERN_SOLID = 2,
OREOLED_PATTERN_SIREN = 3,
OREOLED_PATTERN_STROBE = 4,
OREOLED_PATTERN_FADEIN = 5,
OREOLED_PATTERN_FADEOUT = 6,
OREOLED_PATTERN_PARAMUPDATE = 7,
OREOLED_PATTERN_ENUM_COUNT
};
/* enum of available macros defined by hardware */
enum oreoled_macro {
OREOLED_PARAM_MACRO_RESET = 0,
OREOLED_PARAM_MACRO_COLOUR_CYCLE = 1,
OREOLED_PARAM_MACRO_BREATH = 2,
OREOLED_PARAM_MACRO_STROBE = 3,
OREOLED_PARAM_MACRO_FADEIN = 4,
OREOLED_PARAM_MACRO_FADEOUT = 5,
OREOLED_PARAM_MACRO_RED = 6,
OREOLED_PARAM_MACRO_GREEN = 7,
OREOLED_PARAM_MACRO_BLUE = 8,
OREOLED_PARAM_MACRO_YELLOW = 9,
OREOLED_PARAM_MACRO_WHITE = 10,
OREOLED_PARAM_MACRO_AUTOMOBILE = 11,
OREOLED_PARAM_MACRO_AVIATION = 12,
OREOLED_PARAM_MACRO_ENUM_COUNT
};
/* enum passed to OREOLED_SET_MODE defined by hardware */
enum oreoled_param {
OREOLED_PARAM_BIAS_RED = 0,
OREOLED_PARAM_BIAS_GREEN = 1,
OREOLED_PARAM_BIAS_BLUE = 2,
OREOLED_PARAM_AMPLITUDE_RED = 3,
OREOLED_PARAM_AMPLITUDE_GREEN = 4,
OREOLED_PARAM_AMPLITUDE_BLUE = 5,
OREOLED_PARAM_PERIOD = 6,
OREOLED_PARAM_REPEAT = 7,
OREOLED_PARAM_PHASEOFFSET = 8,
OREOLED_PARAM_MACRO = 9,
OREOLED_PARAM_RESET = 10,
OREOLED_PARAM_APP_CHECKSUM = 11,
OREOLED_PARAM_ENUM_COUNT
};
// update_timer - called by scheduler and updates driver with commands
void update_timer(void);
// set_rgb - set color as a combination of red, green and blue values for one or all LEDs, pattern defaults to solid color
void set_rgb(uint8_t instance, uint8_t red, uint8_t green, uint8_t blue);
// set_rgb - set color as a combination of red, green and blue values for one or all LEDs, using the specified pattern
void set_rgb(uint8_t instance, enum oreoled_pattern pattern, uint8_t red, uint8_t green, uint8_t blue);
// set_rgb - set color as a combination of red, green and blue values for one or all LEDs, using the specified pattern and other parameters
void set_rgb(uint8_t instance, oreoled_pattern pattern, uint8_t red, uint8_t green, uint8_t blue,
uint8_t amplitude_red, uint8_t amplitude_green, uint8_t amplitude_blue,
uint16_t period, uint16_t phase_offset);
// set_macro - set macro for one or all LEDs
void set_macro(uint8_t instance, enum oreoled_macro macro);
// send_sync - force a syncronisation of the all LED's
void send_sync();
// functions to set LEDs to specific patterns. These functions return true if no further updates should be made to LEDs this iteration
bool slow_counter(void);
bool mode_firmware_update(void);
bool mode_init(void);
bool mode_failsafe_radio(void);
bool mode_failsafe_gcs(void);
bool set_standard_colors(void);
bool mode_failsafe_batt(void);
bool mode_auto_flight(void);
bool mode_pilot_flight(void);
// Clear the desired state
void clear_state(void);
// oreo led modes (pattern, macro or rgb)
enum oreoled_mode {
OREOLED_MODE_NONE=0,
OREOLED_MODE_MACRO,
OREOLED_MODE_RGB,
OREOLED_MODE_RGB_EXTENDED,
};
// Oreo LED modes
enum Oreo_LED_Theme {
OreoLED_Disabled = 0,
OreoLED_Aircraft = 1,
OreoLED_Automobile = 2,
};
// oreo_state structure holds possible state of an led
struct oreo_state {
enum oreoled_mode mode;
enum oreoled_pattern pattern;
enum oreoled_macro macro;
uint8_t red;
uint8_t green;
uint8_t blue;
uint8_t amplitude_red;
uint8_t amplitude_green;
uint8_t amplitude_blue;
uint16_t period;
int8_t repeat;
uint16_t phase_offset;
oreo_state();
void clear_state();
void set_macro(oreoled_macro new_macro);
void set_rgb(enum oreoled_pattern new_pattern, uint8_t new_red, uint8_t new_green, uint8_t new_blue);
void set_rgb(enum oreoled_pattern new_pattern, uint8_t new_red, uint8_t new_green,
uint8_t new_blue, uint8_t new_amplitude_red, uint8_t new_amplitude_green, uint8_t new_amplitude_blue,
uint16_t new_period, uint16_t new_phase_offset);
bool operator==(const oreo_state &os);
};
typedef struct {
uint8_t led_num;
uint8_t num_bytes;
uint8_t buff[32];
} oreoled_cmd_t;
// send a I2C command
bool command_send(oreoled_cmd_t &cmd);
void boot_leds(void);
// private members
uint8_t _bus;
HAL_Semaphore _sem;
AP_HAL::OwnPtr<AP_HAL::I2CDevice> _dev;
bool _send_required; // true when we need to send an update to at least one led
oreo_state _state_desired[OREOLED_NUM_LEDS]; // desired state
oreo_state _state_sent[OREOLED_NUM_LEDS]; // last state sent to led
uint8_t _pattern_override; // holds last processed pattern override, 0 if we are not overriding a pattern
uint8_t _oreo_theme; // theme (1=AirCraft, 2=Ground Vehicle)
uint8_t _rear_color_r = 255; // the rear LED red value
uint8_t _rear_color_g = 255; // the rear LED green value
uint8_t _rear_color_b = 255; // the rear LED blue value
uint8_t _slow_count;
uint8_t _boot_count;
uint32_t _last_boot_ms;
uint32_t _last_sync_ms;
};