Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
ardupilot/libraries/AP_RCTelemetry/spektrumTelemetrySensors.h

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

1355 lines
53 KiB
C
Raw Permalink Normal View History

AP_RCTelemetry: Spektrum telemetry library and telemetry abstraction add support for temperature, battery voltage, battery current, flight pack altitiude, airspeed, attitude and compass, GPS, ESC telemetry based on BLHeli status messages and QOS packets. refactor into AP_Telemetry conditionally compile based on HAL_MINIMIZE_FEATURES don't initialize spektrum telemetry if there is no RC uart
2020-03-28 19:39:05 -03:00
//////////////////////////////////////////////////////////////////////////////
//
// Copyright 2013 by Horizon Hobby, Inc.
// All Rights Reserved Worldwide.
//
// Released to Public Domain
//
// This header file may be incorporated into non-Horizon
// products.
//
//////////////////////////////////////////////////////////////////////////////
//
// Author: AK
// Date: 2017-02-24
// Mods: Sync to Spektrum internal version by matching sequence of
// structs, formatting, etc. Also changed some structs from
// having "id" to "identifier." Also redefined "spare" in Rx MAH
// to provide more bits for "chargeUsed" fields.
//
#ifndef TELEMETRY_H
#define TELEMETRY_H
//////////////////////////////////////////////////////////////////////////////
//
// TELEMETRY SENSOR I2C ADDRESSES & DEVICE TYPES
//
//////////////////////////////////////////////////////////////////////////////
#define TELE_DEVICE_NODATA (0x00) // No data in packet, but telemetry is alive
#define TELE_DEVICE_VOLTAGE (0x01) // High-Voltage sensor (INTERNAL)
#define TELE_DEVICE_TEMPERATURE (0x02) // Temperature Sensor (INTERNAL)
#define TELE_DEVICE_AMPS (0x03) // Amps (INTERNAL)
#define TELE_DEVICE_RSV_04 (0x04) // Reserved
#define TELE_DEVICE_FLITECTRL (0x05) // Flight Controller Status Report
#define TELE_DEVICE_RSV_06 (0x06) // Reserved
#define TELE_DEVICE_RSV_07 (0x07) // Reserved
#define TELE_DEVICE_RSV_08 (0x08) // Reserved
//#define DO_NOT_USE (0x09) // DO NOT USE!
#define TELE_DEVICE_PBOX (0x0A) // PowerBox
#define TELE_DEVICE_LAPTIMER (0x0B) // Lap Timer
#define TELE_DEVICE_TEXTGEN (0x0C) // Text Generator
#define TELE_DEVICE_VTX (0x0D) // Video Transmitter Feedback
#define TELE_DEVICE_RSV_0E (0x0E) // Reserved
#define TELE_DEVICE_RSV_0F (0x0F) // Reserved
#define TELE_DEVICE_RSV_10 (0x10) // Reserved
#define TELE_DEVICE_AIRSPEED (0x11) // Air Speed (Eagle Tree Sensor)
#define TELE_DEVICE_ALTITUDE (0x12) // Altitude (Eagle Tree Sensor)
#define TELE_DEVICE_RSV_13 (0x13) // Reserved
#define TELE_DEVICE_GMETER (0x14) // G-Force (Eagle Tree Sensor)
#define TELE_DEVICE_JETCAT (0x15) // Turbine interface (Eagle Tree)
#define TELE_DEVICE_GPS_LOC (0x16) // GPS Location Data (Eagle Tree)
#define TELE_DEVICE_GPS_STATS (0x17) // GPS Status (Eagle Tree)
#define TELE_DEVICE_RX_MAH (0x18) // Receiver Pack Capacity (Dual)
#define TELE_DEVICE_JETCAT_2 (0x19) // Turbine interface, message 2 format (Eagle Tree)
#define TELE_DEVICE_GYRO (0x1A) // 3-axis gyro
#define TELE_DEVICE_ATTMAG (0x1B) // Attitude and Magnetic Compass
#define TELE_DEVICE_TILT (0x1C) // Surface Tilt Sensor
#define TELE_DEVICE_RSV_1D (0x1D) // Reserved
#define TELE_DEVICE_AS6X_GAIN (0x1E) // Active AS6X Gains (new mode)
#define TELE_DEVICE_AS3X_LEGACYGAIN (0x1F) // Active AS3X Gains for legacy mode
#define TELE_DEVICE_ESC (0x20) // Electronic Speed Control
#define TELE_DEVICE_RSV_21 (0x21) // Reserved
#define TELE_DEVICE_FUEL (0x22) // Fuel Flow Meter
#define TELE_DEVICE_RSV_23 (0x23) // Reserved
#define TELE_DEVICE_ALPHA6 (0x24) // Alpha6 Stabilizer
#define TELE_DEVICE_RSV_25 (0x25) // Reserved
#define TELE_DEVICE_GPS_BINARY (0x26) // GPS, binary format
#define TELE_DEVICE_RSV_27 (0x27) // Reserved
#define TELE_DEVICE_RSV_28 (0x28) // Reserved
#define TELE_DEVICE_RSV_29 (0x29) // Reserved
#define TELE_DEVICE_RSV_2A (0x2A) // Reserved
#define TELE_DEVICE_RSV_2B (0x2B) // Reserved
#define TELE_DEVICE_RSV_2C (0x2C) // Reserved
#define TELE_DEVICE_RSV_2D (0x2D) // Reserved
#define TELE_DEVICE_RSV_2E (0x2E) // Reserved
#define TELE_DEVICE_RSV_2F (0x2F) // Reserved
//#define DO_NOT_USE (0x30) // Internal ST sensor
//#define DO_NOT_USE (0x32) // Internal ST sensor
#define TELE_DEVICE_RSV_33 (0x33) // Reserved
#define TELE_DEVICE_FP_MAH (0x34) // Flight Battery Capacity (Dual)
#define TELE_DEVICE_RSV_35 (0x35) // Reserved
#define TELE_DEVICE_DIGITAL_AIR (0x36) // Digital Inputs & Tank Pressure
#define TELE_DEVICE_RSV_37 (0x37) // Reserved
#define TELE_DEVICE_STRAIN (0x38) // Thrust/Strain Gauge
#define TELE_DEVICE_RSV_39 (0x39) // Reserved
#define TELE_DEVICE_LIPOMON (0x3A) // 6S Cell Monitor (LiPo taps)
#define TELE_DEVICE_RSV_3B (0x3B) // Reserved
#define TELE_DEVICE_RSV_3C (0x3C) // Reserved
#define TELE_DEVICE_RSV_3D (0x3D) // Reserved
#define TELE_DEVICE_RSV_3E (0x3E) // Reserved
#define TELE_DEVICE_LIPOMON_14 (0x3F) // 14S Cell Monitor (LiPo taps)
#define TELE_DEVICE_VARIO_S (0x40) // Vario
#define TELE_DEVICE_RSV_41 (0x41) // Reserved
#define TELE_DEVICE_SMARTBATT (0x42) // Spektrum SMART Battery (multiple structs)
#define TELE_DEVICE_RSV_43 (0x43) // Reserved
#define TELE_DEVICE_RSV_44 (0x44) // Reserved
#define TELE_DEVICE_RSV_45 (0x45) // Reserved
#define TELE_DEVICE_RSV_46 (0x46) // Reserved
#define TELE_DEVICE_RSV_47 (0x47) // Reserved
#define TELE_DEVICE_RSV_48 (0x48) // Reserved
#define TELE_DEVICE_RSV_49 (0x49) // Reserved
#define TELE_DEVICE_RSV_4A (0x4A) // Reserved
#define TELE_DEVICE_RSV_4B (0x4B) // Reserved
#define TELE_DEVICE_RSV_4C (0x4C) // Reserved
#define TELE_DEVICE_RSV_4D (0x4D) // Reserved
#define TELE_DEVICE_RSV_4E (0x4E) // Reserved
#define TELE_DEVICE_RSV_4F (0x4F) // Reserved
#define TELE_DEVICE_USER_16SU (0x50) // User-Defined, STRU_TELE_USER_16SU
#define TELE_DEVICE_RSV_51 (0x51) // Reserved
#define TELE_DEVICE_USER_16SU32U (0x52) // User-Defined, STRU_TELE_USER_16SU32U
#define TELE_DEVICE_RSV_53 (0x53) // Reserved
#define TELE_DEVICE_USER_16SU32S (0x54) // User-Defined, STRU_TELE_USER_16SU32S
#define TELE_DEVICE_RSV_55 (0x55) // Reserved
#define TELE_DEVICE_USER_16U32SU (0x56) // User-Defined, STRU_TELE_USER_16U32SU
#define TELE_DEVICE_RSV_57 (0x57) // Reserved
#define TELE_DEVICE_RSV_58 (0x58) // Reserved
#define TELE_DEVICE_MULTICYLINDER (0x59) // Multi-cylinder temp sensor
#define TELE_DEVICE_RSV_5A (0x5A) // Reserved
#define TELE_DEVICE_RSV_5B (0x5B) // Reserved
#define TELE_DEVICE_RSV_5C (0x5C) // Reserved
#define TELE_DEVICE_RSV_5D (0x5D) // Reserved
#define TELE_DEVICE_RSV_5E (0x5E) // Reserved
#define TELE_DEVICE_RSV_5F (0x5F) // Reserved
#define TELE_DEVICE_VSPEAK (0x60) // Reserved for V-Speak
#define TELE_DEVICE_SMOKE_EL (0x61) // Reserved for Smoke-EL.de
#define TELE_DEVICE_CROSSFIRE (0x62) // Reserved for Crossfire devices
#define TELE_DEVICE_RSV_63 (0x63) // Reserved
#define TELE_DEVICE_RSV_64 (0x64) // Reserved
#define TELE_DEVICE_RSV_65 (0x65) // Reserved
#define TELE_DEVICE_EXTRF (0x66) // Reserved for Generic External RF sources
#define TELE_DEVICE_RSV_67 (0x67) // Reserved
#define TELE_DEVICE_RSV_68 (0x68) // Reserved
#define TELE_DEVICE_RSV_69 (0x69) // Reserved
#define TELE_DEVICE_RSV_6A (0x6A) // Reserved
//#define DO_NOT_USE (0x6B) // DO NOT USE!
#define TELE_DEVICE_RSV_6C (0x6C) // Reserved
#define TELE_DEVICE_RSV_6D (0x6D) // Reserved
#define TELE_DEVICE_RSV_6E (0x6E) // Reserved
#define TELE_DEVICE_RSV_6F (0x6F) // Reserved
#define TELE_DEVICE_RSV_70 (0x70) // Reserved
#define TELE_XRF_LINKSTATUS (0x71) // External RF Link Status
#define TELE_DEVICE_RSV_72 (0x72) // Reserved
#define TELE_DEVICE_RSV_73 (0x73) // Reserved
#define TELE_DEVICE_RSV_74 (0x74) // Reserved
#define TELE_DEVICE_RSV_75 (0x75) // Reserved
#define TELE_DEVICE_RSV_76 (0x76) // Reserved
#define TELE_DEVICE_RSV_77 (0x77) // Reserved
#define TELE_DEVICE_RSV_78 (0x78) // Reserved
#define TELE_DEVICE_RSV_79 (0x79) // Reserved
#define TELE_DEVICE_RSV_7A (0x7A) // Reserved
#define TELE_DEVICE_ALT_ZERO (0x7B) // Pseudo-device setting Altitude "zero"
#define TELE_DEVICE_RTC (0x7C) // Pseudo-device giving timestamp
#define TELE_DEVICE_RPM (0x7E) // RPM sensor
#define TELE_DEVICE_QOS (0x7F) // RxV + flight log data
#define TELE_DEVICE_MAX (0x7F) // Last address available
#define TELE_DEVICE_SHORTRANGE (0x80) // OR this bit to indicate data is from a short-range telemetry device (e.g. TM1100)
#define TELE_DEVICE_MAX_PROGRAM (0x70) // Last programmable address when using sID
//////////////////////////////////////////////////////////////////////////////
//
// TELEMETRY
// DEVICE-SPECIFIC STRUCTURES
//
//////////////////////////////////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////
//
// THIRD-PARTY 16-BIT DATA SIGNED/UNSIGNED
//
//////////////////////////////////////////////////////////////////////////////
//
typedef struct
{
UINT8 identifier; // Source device = 0x50
UINT8 sID; // Secondary ID
INT16 sField1, // Signed 16-bit data fields
sField2,
sField3;
UINT16 uField1, // Unsigned 16-bit data fields
uField2,
uField3,
uField4;
} STRU_TELE_USER_16SU;
//////////////////////////////////////////////////////////////////////////////
//
// THIRD-PARTY 16-BIT SIGNED/UNSIGNED AND 32-BIT UNSIGNED
//
//////////////////////////////////////////////////////////////////////////////
//
typedef struct
{
UINT8 identifier; // Source device = 0x52
UINT8 sID; // Secondary ID
INT16 sField1, // Signed 16-bit data fields
sField2;
UINT16 uField1, // Unsigned 16-bit data fields
uField2,
uField3;
UINT32 u32Field; // Unsigned 32-bit data field
} STRU_TELE_USER_16SU32U;
//////////////////////////////////////////////////////////////////////////////
//
// THIRD-PARTY 16-BIT SIGNED/UNSIGNED AND 32-BIT SIGNED
//
//////////////////////////////////////////////////////////////////////////////
//
typedef struct
{
UINT8 identifier; // Source device = 0x54
UINT8 sID; // Secondary ID
INT16 sField1, // Signed 16-bit data fields
sField2;
UINT16 uField1, // Unsigned 16-bit data fields
uField2,
uField3;
INT32 s32Field; // Signed 32-bit data field
} STRU_TELE_USER_16SU32S;
//////////////////////////////////////////////////////////////////////////////
//
// THIRD-PARTY 16-BIT UNSIGNED AND 32-BIT SIGNED/UNSIGNED
//
//////////////////////////////////////////////////////////////////////////////
//
typedef struct
{
UINT8 identifier; // Source device = 0x56
UINT8 sID; // Secondary ID
UINT16 uField1; // Unsigned 16-bit data field
INT32 s32Field; // Signed 32-bit data field
UINT32 u32Field1, // Unsigned 32-bit data fields
u32Field2;
} STRU_TELE_USER_16U32SU;
//////////////////////////////////////////////////////////////////////////////
//
// POWERBOX
//
//////////////////////////////////////////////////////////////////////////////
//
typedef struct
{
UINT8 identifier; // Source device = 0x0A
UINT8 sID; // Secondary ID
UINT16 volt1; // Volts, 0.01v
UINT16 volt2; // Volts, 0.01v
UINT16 capacity1; // mAh, 1mAh
UINT16 capacity2; // mAh, 1mAh
UINT16 spare16_1;
UINT16 spare16_2;
UINT8 spare;
UINT8 alarms; // Alarm bitmask (see below)
} STRU_TELE_POWERBOX;
#define TELE_PBOX_ALARM_VOLTAGE_1 (0x01)
#define TELE_PBOX_ALARM_VOLTAGE_2 (0x02)
#define TELE_PBOX_ALARM_CAPACITY_1 (0x04)
#define TELE_PBOX_ALARM_CAPACITY_2 (0x08)
//#define TELE_PBOX_ALARM_RPM (0x10)
//#define TELE_PBOX_ALARM_TEMPERATURE (0x20)
#define TELE_PBOX_ALARM_RESERVED_1 (0x40)
#define TELE_PBOX_ALARM_RESERVED_2 (0x80)
//////////////////////////////////////////////////////////////////////////////
//
// VOLTAGE
//
//////////////////////////////////////////////////////////////////////////////
//
typedef struct
{
UINT8 identifier; // Source device = 0x01
UINT8 sID; // Secondary ID
UINT16 volts; // 0.01V increments
} STRU_TELE_HV;
//////////////////////////////////////////////////////////////////////////////
//
// TEMPERATURE
//
//////////////////////////////////////////////////////////////////////////////
//
typedef struct
{
UINT8 identifier; // Source device = 0x02
UINT8 sID; // Secondary ID
INT16 temperature; // Temperature in degrees Fahrenheit
} STRU_TELE_TEMP;
//////////////////////////////////////////////////////////////////////////////
//
// RX CAPACITY METER
//
//////////////////////////////////////////////////////////////////////////////
//
typedef struct
{
UINT8 identifier; // Source device = 0x18
UINT8 sID; // Secondary ID
INT16 current_A; // Instantaneous current, 0.01A (0-328.7A) 7FFF-> no data
UINT16 chargeUsed_A; // Integrated mAh used, 0.1mAh (0-3276.6mAh)
UINT16 volts_A; // Volts, 0.01V increments (0-16.00V)
INT16 current_B; // Instantaneous current, 0.01A (0-328.7A) 7FFF-> no data/sensor B
UINT16 chargeUsed_B; // Integrated mAh used, 0.1mAh (0-3276.6mAh)
UINT16 volts_B; // Volts, 0.01V increments (0-16.00V)
UINT8 alerts, // Bit mapped alert conditions (see below)
highCharge; // High nybble is extra bits for chargeUsed_B, Low is for chargeUsed_A
} STRU_TELE_RX_MAH;
#define RXMAH_PS_ALERT_NONE (0) // No alarms
#define RXMAH_PS_ALERT_RF_INT (1 << 0) // A or internal Remote failure
#define RXMAH_PS_ALERT_RF_ANT1 (1 << 1) // B remote power fault
#define RXMAH_PS_ALERT_RF_ANT2 (1 << 2) // L remote power fault
#define RXMAH_PS_ALERT_RF_ANT3 (1 << 3) // R remote power fault
#define RXMAH_PS_ALERT_OVERVOLT_A (1 << 4) // Battery A is over voltage
#define RXMAH_PS_ALERT_OVERVOLT_B (1 << 5) // Battery A is over voltage
#define RXMAH_PS_ALERT_RFU1 (1 << 6)
#define RXMAH_PS_ALERT_RFU2 (1 << 7)
//////////////////////////////////////////////////////////////////////////////
//
// HIGH-CURRENT
//
//////////////////////////////////////////////////////////////////////////////
//
typedef struct
{
UINT8 identifier; // Source device = 0x03
UINT8 sID; // Secondary ID
INT16 current, // Range: +/- 150A Resolution: 300A / 2048 = 0.196791 A/count
dummy; // TBD
} STRU_TELE_IHIGH;
#define IHIGH_RESOLUTION_FACTOR ((FP32)(0.196791))
//////////////////////////////////////////////////////////////////////////////
//
// SIMPLE VARIO
//
//////////////////////////////////////////////////////////////////////////////
//
typedef struct
{
UINT8 identifier; // Source device = 0x40
UINT8 sID; // Secondary ID
INT16 altitude; // .1m increments
INT16 delta_0250ms, // change in altitude last 250ms, 0.1m/s increments
delta_0500ms, // change in altitude last 500ms, 0.1m/s increments
delta_1000ms, // change in altitude last 1.0 seconds, 0.1m/s increments
delta_1500ms, // change in altitude last 1.5 seconds, 0.1m/s increments
delta_2000ms, // change in altitude last 2.0 seconds, 0.1m/s increments
delta_3000ms; // change in altitude last 3.0 seconds, 0.1m/s increments
} STRU_TELE_VARIO_S;
//////////////////////////////////////////////////////////////////////////////
//
// ALTIMETER
//
//////////////////////////////////////////////////////////////////////////////
//
typedef struct
{
UINT8 identifier;
UINT8 sID; // Secondary ID
INT16 altitude; // .1m increments
INT16 maxAltitude; // .1m increments
} STRU_TELE_ALT; // Eagle Tree Sensor
//////////////////////////////////////////////////////////////////////////////
//
// AIRSPEED
//
//////////////////////////////////////////////////////////////////////////////
//
typedef struct
{
UINT8 identifier;
UINT8 sID; // Secondary ID
UINT16 airspeed; // 1 km/h increments
UINT16 maxAirspeed; // 1 km/h increments
} STRU_TELE_SPEED; // Eagle Tree Sensor
//////////////////////////////////////////////////////////////////////////////
//
// LAP TIMER
//
//////////////////////////////////////////////////////////////////////////////
//
typedef struct
{
UINT8 identifier;
UINT8 sID; // Secondary ID
UINT8 lapNumber; // Lap last finished
UINT8 gateNumber; // Last gate passed
UINT32 lastLapTime; // Time of lap in 1ms increments (NOT duration)
UINT32 gateTime; // Duration between last 2 gates
UINT8 unused[4];
} STRU_TELE_LAPTIMER;
//////////////////////////////////////////////////////////////////////////////
//
// TEXT GENERATOR
//
//////////////////////////////////////////////////////////////////////////////
//
typedef struct
{
UINT8 identifier;
UINT8 sID; // Secondary ID
UINT8 lineNumber; // Line number to display (0 = title, 1-8 for general, 254 = Refresh backlight, 255 = Erase all text on screen)
char text[13]; // 0-terminated text when < 13 chars
} STRU_TELE_TEXTGEN;
//////////////////////////////////////////////////////////////////////////////
//
// VIDEO TRANSMITTER (VTX)
//
//////////////////////////////////////////////////////////////////////////////
//
// VTX spec subject to change. Refer to Spektrum VTX Interfacing document for latest info
//
typedef struct
{
UINT8 identifier;
UINT8 sID; // Secondary ID
UINT8 band; // VTX Band (0 = Fatshark, 1 = Raceband, 2 = E, 3 = B, 4 = A, 5-7 = Reserved)
UINT8 channel; // VTX Channel (0-7)
UINT8 pit; // Pit/Race mode (0 = Race, 1 = Pit). Race = (normal operating) mode. Pit = (reduced power) mode. When PIT is set, it overrides all other power settings.
UINT8 power; // VTX Power (0 = Off, 1 = 1mw to 14mW, 2 = 15mW to 25mW, 3 = 26mW to 99mW, 4 = 100mW to 299mW, 5 = 300mW to 600mW, 6 = 601mW+, 7 = manual control)
UINT16 powerDec; // VTX Power as a decimal 1mw/unit
UINT8 region; // Region (0 = USA, 1 = EU, 0xFF = Not Provided)
UINT8 unused[7]; // reserved
} STRU_TELE_VTX;
//////////////////////////////////////////////////////////////////////////////
//
// ESC
//
//////////////////////////////////////////////////////////////////////////////
//
// Uses big-endian byte order
//
typedef struct
{
UINT8 identifier; // Source device = 0x20
UINT8 sID; // Secondary ID
UINT16 RPM; // Electrical RPM, 10RPM (0-655340 RPM) 0xFFFF --> "No data"
UINT16 voltsInput; // Volts, 0.01v (0-655.34V) 0xFFFF --> "No data"
UINT16 tempFET; // Temperature, 0.1C (0-6553.4C) 0xFFFF --> "No data"
UINT16 currentMotor; // Current, 10mA (0-655.34A) 0xFFFF --> "No data"
UINT16 tempBEC; // Temperature, 0.1C (0-6553.4C) 0xFFFF --> "No data"
UINT8 currentBEC; // BEC Current, 100mA (0-25.4A) 0xFF ----> "No data"
UINT8 voltsBEC; // BEC Volts, 0.05V (0-12.70V) 0xFF ----> "No data"
UINT8 throttle; // 0.5% (0-100%) 0xFF ----> "No data"
UINT8 powerOut; // Power Output, 0.5% (0-127%) 0xFF ----> "No data"
} STRU_TELE_ESC;
//////////////////////////////////////////////////////////////////////////////
//
// (Liquid) Fuel Flow/Capacity (Two Tanks/Engines)
//
//////////////////////////////////////////////////////////////////////////////
//
typedef struct
{
UINT8 identifier; // Source device = 0x22
UINT8 sID; // Secondary ID
UINT16 fuelConsumed_A; // Integrated fuel consumption, 0.1mL
UINT16 flowRate_A; // Instantaneous consumption, 0.01mL/min
UINT16 temp_A; // Temperature, 0.1C (0-655.34C)
UINT16 fuelConsumed_B; // Integrated fuel consumption, 0.1mL
UINT16 flowRate_B; // Instantaneous consumption, 0.01mL/min
UINT16 temp_B; // Temperature, 0.1C (0-655.34C)
UINT16 spare; // Not used
} STRU_TELE_FUEL;
//////////////////////////////////////////////////////////////////////////////
//
// Battery Current/Capacity (Flight Pack Capacity)
//
//////////////////////////////////////////////////////////////////////////////
//
// AK 2013-11-19 make struct align with 0x03 device
//
typedef struct
{
UINT8 identifier; // Source device = 0x34
UINT8 sID; // Secondary ID
INT16 current_A; // Instantaneous current, 0.1A (0-3276.6A)
INT16 chargeUsed_A; // Integrated mAh used, 1mAh (0-32.766Ah)
UINT16 temp_A; // Temperature, 0.1C (0-150C, 0x7FFF indicates not populated)
INT16 current_B; // Instantaneous current, 0.1A (0-3276.6A)
INT16 chargeUsed_B; // Integrated mAh used, 1mAh (0-32.766Ah)
UINT16 temp_B; // Temperature, 0.1C (0-150C, 0x7FFF indicates not populated)
UINT16 spare; // Not used
} STRU_TELE_FP_MAH;
//////////////////////////////////////////////////////////////////////////////
//
// Digital Input Status (Retract Status) and Tank Pressure
//
//////////////////////////////////////////////////////////////////////////////
//
typedef struct
{
UINT8 identifier; // Source device = TELE_DEVICE_DIGITAL_AIR
UINT8 sID; // Secondary ID
UINT16 digital; // Digital inputs (bit per input)
UINT16 spare1;
UINT16 pressure[4]; // Tank pressure, 0.1PSI (0-6553.4PSI), 0xFFFF = Not Installed
UINT16 spare2;
} STRU_TELE_DIGITAL_AIR;
//////////////////////////////////////////////////////////////////////////////
//
// Thrust/Strain Gauge
//
//////////////////////////////////////////////////////////////////////////////
//
typedef struct
{
UINT8 identifier; // Source device = 0x38
UINT8 sID; // Secondary ID
UINT16 strain_A, // Strain sensor A
strain_B, // Strain sensor B
strain_C, // Strain sensor D
strain_D; // Strain sensor C
} STRU_TELE_STRAIN;
//////////////////////////////////////////////////////////////////////////////
//
// 6S LiPo Cell Monitor
//
//////////////////////////////////////////////////////////////////////////////
//
typedef struct
{
UINT8 identifier; // Source device = 0x3A
UINT8 sID; // Secondary ID
UINT16 cell[6]; // Voltage across cell 1, .01V steps
// 0x7FFF --> cell not present
UINT16 temp; // Temperature, 0.1C (0-655.34C)
} STRU_TELE_LIPOMON;
//////////////////////////////////////////////////////////////////////////////
//
// 14S LiPo Cell Monitor
//
//////////////////////////////////////////////////////////////////////////////
//
typedef struct
{
UINT8 identifier; // Source device = 0x3F
UINT8 sID; // Secondary ID
UINT8 cell[14]; // Voltage across cell 1, .01V steps, excess of 2.56V
// (ie, 3.00V would report 300-256 = 44)
// 0xFF --> cell not present
} STRU_TELE_LIPOMON_14;
//////////////////////////////////////////////////////////////////////////////
//
// Smart Battery
//
//////////////////////////////////////////////////////////////////////////////
//
// Uses little-endian byte order for all multi-byte fields
//
typedef struct
{
UINT8 identifier; // Source device = 0x42
UINT8 sID; // Secondary ID
UINT8 typeChannel; // Upper nybble = Message type; Lower nybble = Battery number (0 or 1)
UINT8 msgData[13]; // Message-specific data, determined by upper nybble of typeChannel (see defs below)
} STRU_SMARTBATT_HEADER;
#define SMARTBATT_MSG_TYPE_MASK_BATTNUMBER (0x0F)
#define SMARTBATT_MSG_TYPE_MASK_MSGTYPE (0xF0)
#define SMARTBATT_MSG_TYPE_REALTIME (0x00)
#define SMARTBATT_MSG_TYPE_CELLS_1_6 (0x10)
#define SMARTBATT_MSG_TYPE_CELLS_7_12 (0x20)
#define SMARTBATT_MSG_TYPE_CELLS_13_18 (0x30)
#define SMARTBATT_MSG_TYPE_ID (0x80)
#define SMARTBATT_MSG_TYPE_LIMITS (0x90)
//...........................................................................
// Real-time battery data when current sense is available
typedef struct
{
UINT8 identifier; // Source device = 0x42
UINT8 sID; // Secondary ID
UINT8 typeChannel; // Msg type = SMARTBATT_MSG_TYPE_REALTIME | Battery number (0 or 1)
INT8 temperature_C; // Temperature in degrees C, 1 degree increments (-128 = unavailable)
UINT32 dischargeCurrent_mA; // Amount of current being drawn from battery, in mA steps (0xFFFFFFFF = unavailable)
UINT16 batteryCapacityUsage_mAh; // Approximate battery capacity usage, in mAh (0xFFFF = unavailable)
UINT16 minCellVoltage_mV; // Minimum cell voltage of pack, in mV
UINT16 maxCellVoltage_mV; // Maximum cell voltage of pack, in mV
UINT8 rfu[2];
} STRU_SMARTBATT_REALTIME;
//...........................................................................
// Real-time cell voltage
typedef struct
{
UINT8 identifier; // Source device = 0x42
UINT8 sID; // Secondary ID
UINT8 typeChannel; // Msg type = SMARTBATT_MSG_TYPE_CELLS_X_Y | Battery number (0 or 1)
INT8 temperature_C; // Temperature in degrees C, 1 degree increments (-128 = unavailable)
UINT16 cellVoltage_mV[6]; // Cell voltage of first 6 cells, in mV (0xFFFF = unavailable)
} STRU_SMARTBATT_CELLS;
//...........................................................................
// Smart Battery ID and general info
typedef struct
{
UINT8 identifier; // Source device = 0x42
UINT8 sID; // Secondary ID
UINT8 typeChannel; // Msg type = SMARTBATT_MSG_TYPE_ID | Battery number (0 or 1)
UINT8 chemistry; // 0:LiHv, 1:LiPo, 2:LiIon, 3:LiFe, 4:Pb, 5:Ni-MH/Cd
UINT8 numOfCells; // Number of cells in the battery
UINT8 manufacturer; // 0:BattGo
UINT16 cycles; // Number of charge/discharge cycles recorded (0 = unavailable)
UINT8 uniqueID[8]; // Unique battery ID, manufacturer-specific
// 0: [0] = lower (first) byte of "Customer ID"
// [1-3] = lower 3 bytes of "Special Mark of Battery"
// [4-7] = 4-byte "Manufacturing Date"
} STRU_SMARTBATT_ID;
//...........................................................................
// Smart Battery Limits
typedef struct
{
UINT8 identifier; // Source device = 0x42
UINT8 sID; // Secondary ID
UINT8 typeChannel; // Msg type = SMARTBATT_MSG_TYPE_LIMITS | Battery number (0 or 1)
UINT8 rfu;
UINT16 fullCapacity_mAh; // Fully charged battery capacity, in mAh
UINT16 dischargeCurrentRating; // Rated discharge current, in 0.1C
UINT16 overDischarge_mV; // Limit below which battery is likely damaged, in mV
UINT16 zeroCapacity_mV; // Voltage at which LVC protection should activate, in mV
UINT16 fullyCharged_mV; // Voltage reading expected when fully charged, in mV
INT8 minWorkingTemp; // Minimum working temperature in degrees C, 1 degree steps
INT8 maxWorkingTemp; // Maximum working temperature in degrees C, 1 degree steps
} STRU_SMARTBATT_LIMITS;
//////////////////////////////////////////////////////////////////////////////
//
// ACCELEROMETER
//
//////////////////////////////////////////////////////////////////////////////
//
typedef struct
{
UINT8 identifier; // Source device = 0x14
UINT8 sID; // Secondary ID
INT16 GForceX; // force is reported as .01G increments
INT16 GForceY; // Range = +/-4000 (+/- 40G) in Pro model
INT16 GForceZ; // Range = +/-800 (+/- 8G) in Standard model
INT16 maxGForceX; // abs(max G X-axis) FORE/AFT
INT16 maxGForceY; // abs (max G Y-axis) LEFT/RIGHT
INT16 maxGForceZ; // max G Z-axis WING SPAR LOAD
INT16 minGForceZ; // min G Z-axis WING SPAR LOAD
} STRU_TELE_G_METER;
//////////////////////////////////////////////////////////////////////////////
//
// SURFACE TILT (ATTITUDE) SENSOR
//
//////////////////////////////////////////////////////////////////////////////
//
typedef struct
{
UINT8 identifier; // Source device = 0x1C TELE_DEVICE_TILT
UINT8 sID; // Secondary ID
INT16 attQuatX; // Quaternion representing attitude using RHR. X component in Q14.
INT16 attQuatY; // Y component in Q14.
INT16 attQuatZ; // Z component in Q14.
INT16 attQuatW; // W component in Q14.
UINT16 spare[3];
} STRU_TELE_TILT;
//////////////////////////////////////////////////////////////////////////////
//
// TURBINE
//
//////////////////////////////////////////////////////////////////////////////
//
typedef struct
{
UINT8 identifier; // Source device = 0x15
UINT8 sID; // Secondary ID
UINT8 status; // Table below
UINT8 throttle; // (BCD) xx Percent
UINT16 packVoltage; // (BCD) xx.yy
UINT16 pumpVoltage; // (BCD) xx.yy
UINT32 RPM; // (BCD)
UINT16 EGT; // (BCD) Temperature, Celsius
UINT8 offCondition; // Table below
UINT8 spare;
} STRU_TELE_JETCAT;
enum JETCAT_ECU_TURBINE_STATE { // ECU Status definitions
JETCAT_ECU_STATE_OFF = 0x00,
JETCAT_ECU_STATE_WAIT_for_RPM = 0x01, // (Stby/Start)
JETCAT_ECU_STATE_Ignite = 0x02,
JETCAT_ECU_STATE_Accelerate = 0x03,
JETCAT_ECU_STATE_Stabilise = 0x04,
JETCAT_ECU_STATE_Learn_HI = 0x05,
JETCAT_ECU_STATE_Learn_LO = 0x06,
JETCAT_ECU_STATE_UNDEFINED = 0x07,
JETCAT_ECU_STATE_Slow_Down = 0x08,
JETCAT_ECU_STATE_Manual = 0x09,
JETCAT_ECU_STATE_AutoOff = 0x10,
JETCAT_ECU_STATE_Run = 0x11, // (reg.)
JETCAT_ECU_STATE_Accleleration_delay = 0x12,
JETCAT_ECU_STATE_SpeedReg = 0x13, // (Speed Ctrl)
JETCAT_ECU_STATE_Two_Shaft_Regulate = 0x14, // (only for secondary shaft)
JETCAT_ECU_STATE_PreHeat1 = 0x15,
JETCAT_ECU_STATE_PreHeat2 = 0x16,
JETCAT_ECU_STATE_MainFStart = 0x17,
JETCAT_ECU_STATE_NotUsed = 0x18,
JETCAT_ECU_STATE_KeroFullOn = 0x19,
// undefined states 0x1A-0x1F
EVOJET_ECU_STATE_off = 0x20,
EVOJET_ECU_STATE_ignt = 0x21,
EVOJET_ECU_STATE_acce = 0x22,
EVOJET_ECU_STATE_run = 0x23,
EVOJET_ECU_STATE_cal = 0x24,
EVOJET_ECU_STATE_cool = 0x25,
EVOJET_ECU_STATE_fire = 0x26,
EVOJET_ECU_STATE_glow = 0x27,
EVOJET_ECU_STATE_heat = 0x28,
EVOJET_ECU_STATE_idle = 0x29,
EVOJET_ECU_STATE_lock = 0x2A,
EVOJET_ECU_STATE_rel = 0x2B,
EVOJET_ECU_STATE_spin = 0x2C,
EVOJET_ECU_STATE_stop = 0x2D,
// undefined states 0x2E-0x2F
HORNET_ECU_STATE_OFF = 0x30,
HORNET_ECU_STATE_SLOWDOWN = 0x31,
HORNET_ECU_STATE_COOL_DOWN = 0x32,
HORNET_ECU_STATE_AUTO = 0x33,
HORNET_ECU_STATE_AUTO_HC = 0x34,
HORNET_ECU_STATE_BURNER_ON = 0x35,
HORNET_ECU_STATE_CAL_IDLE = 0x36,
HORNET_ECU_STATE_CALIBRATE = 0x37,
HORNET_ECU_STATE_DEV_DELAY = 0x38,
HORNET_ECU_STATE_EMERGENCY = 0x39,
HORNET_ECU_STATE_FUEL_HEAT = 0x3A,
HORNET_ECU_STATE_FUEL_IGNITE = 0x3B,
HORNET_ECU_STATE_GO_IDLE = 0x3C,
HORNET_ECU_STATE_PROP_IGNITE = 0x3D,
HORNET_ECU_STATE_RAMP_DELAY = 0x3E,
HORNET_ECU_STATE_RAMP_UP = 0x3F,
HORNET_ECU_STATE_STANDBY = 0x40,
HORNET_ECU_STATE_STEADY = 0x41,
HORNET_ECU_STATE_WAIT_ACC = 0x42,
HORNET_ECU_STATE_ERROR = 0x43,
// undefined states 0x44-0x4F
XICOY_ECU_STATE_Temp_High = 0x50,
XICOY_ECU_STATE_Trim_Low = 0x51,
XICOY_ECU_STATE_Set_Idle = 0x52,
XICOY_ECU_STATE_Ready = 0x53,
XICOY_ECU_STATE_Ignition = 0x54,
XICOY_ECU_STATE_Fuel_Ramp = 0x55,
XICOY_ECU_STATE_Glow_Test = 0x56,
XICOY_ECU_STATE_Running = 0x57,
XICOY_ECU_STATE_Stop = 0x58,
XICOY_ECU_STATE_Flameout = 0x59,
XICOY_ECU_STATE_Speed_Low = 0x5A,
XICOY_ECU_STATE_Cooling = 0x5B,
XICOY_ECU_STATE_Igniter_Bad = 0x5C,
XICOY_ECU_STATE_Starter_F = 0x5D,
XICOY_ECU_STATE_Weak_Fuel = 0x5E,
XICOY_ECU_STATE_Start_On = 0x5F,
XICOY_ECU_STATE_Pre_Heat = 0x60,
XICOY_ECU_STATE_Battery = 0x61,
XICOY_ECU_STATE_Time_Out = 0x62,
XICOY_ECU_STATE_Overload = 0x63,
XICOY_ECU_STATE_Igniter_Fail = 0x64,
XICOY_ECU_STATE_Burner_On = 0x65,
XICOY_ECU_STATE_Starting = 0x66,
XICOY_ECU_STATE_SwitchOver = 0x67,
XICOY_ECU_STATE_Cal_Pump = 0x68,
XICOY_ECU_STATE_Pump_Limit = 0x69,
XICOY_ECU_STATE_No_Engine = 0x6A,
XICOY_ECU_STATE_Pwr_Boost = 0x6B,
XICOY_ECU_STATE_Run_Idle = 0x6C,
XICOY_ECU_STATE_Run_Max = 0x6D,
// undefined states 0x6e-0x73
JETCENT_ECU_STATE_STOP = 0x74,
JETCENT_ECU_STATE_GLOW_TEST = 0x75,
JETCENT_ECU_STATE_STARTER_TEST = 0x76,
JETCENT_ECU_STATE_PRIME_FUEL = 0x77,
JETCENT_ECU_STATE_PRIME_BURNER = 0x78,
JETCENT_ECU_STATE_MAN_COOL = 0x79,
JETCENT_ECU_STATE_AUTO_COOL = 0x7A,
JETCENT_ECU_STATE_IGN_HEAT = 0x7B,
JETCENT_ECU_STATE_IGNITION = 0x7C,
JETCENT_ECU_STATE_PREHEAT = 0x7D,
JETCENT_ECU_STATE_SWITCHOVER = 0x7E,
JETCENT_ECU_STATE_TO_IDLE = 0x7F,
JETCENT_ECU_STATE_RUNNING = 0x80,
JETCENT_ECU_STATE_STOP_ERROR = 0x81,
// undefined states 0x82-0x8F
SWIWIN_ECU_STATE_STOP = 0x90,
SWIWIN_ECU_STATE_READY = 0x91,
SWIWIN_ECU_STATE_IGNITION = 0x92,
SWIWIN_ECU_STATE_PREHEAT = 0x93,
SWIWIN_ECU_STATE_FUEL_RAMP = 0x94,
SWIWIN_ECU_STATE_RUNNING = 0x95,
SWIWIN_ECU_STATE_COOLING = 0x96,
SWIWIN_ECU_STATE_RESTART_SWOVER = 0x97,
SWIWIN_ECU_STATE_NOTUSED = 0x98,
// undefined states 0x99-0x9F
TURBINE_ECU_MAX_STATE = 0x9F
};
enum JETCAT_ECU_OFF_CONDITIONS { // ECU off conditions. Valid only when the ECUStatus = JETCAT_ECU_STATE_OFF
JETCAT_ECU_OFF_No_Off_Condition_defined = 0,
JETCAT_ECU_OFF_Shut_down_via_RC,
JETCAT_ECU_OFF_Overtemperature,
JETCAT_ECU_OFF_Ignition_timeout,
JETCAT_ECU_OFF_Acceleration_time_out,
JETCAT_ECU_OFF_Acceleration_too_slow,
JETCAT_ECU_OFF_Over_RPM,
JETCAT_ECU_OFF_Low_Rpm_Off,
JETCAT_ECU_OFF_Low_Battery,
JETCAT_ECU_OFF_Auto_Off,
JETCAT_ECU_OFF_Low_temperature_Off,
JETCAT_ECU_OFF_Hi_Temp_Off,
JETCAT_ECU_OFF_Glow_Plug_defective,
JETCAT_ECU_OFF_Watch_Dog_Timer,
JETCAT_ECU_OFF_Fail_Safe_Off,
JETCAT_ECU_OFF_Manual_Off, // (via GSU)
JETCAT_ECU_OFF_Power_fail, // (Battery fail)
JETCAT_ECU_OFF_Temp_Sensor_fail, // (only during startup)
JETCAT_ECU_OFF_Fuel_fail,
JETCAT_ECU_OFF_Prop_fail,
JETCAT_ECU_OFF_2nd_Engine_fail,
JETCAT_ECU_OFF_2nd_Engine_Diff_Too_High,
JETCAT_ECU_OFF_2nd_Engine_No_Comm,
JETCAT_ECU_MAX_OFF_COND,
// Jet Central
JETCENT_ECU_OFF_No_Off_Condition_defined = 24, // ECU off conditions. Valid only when the ECUStatus = JETCENT_ECU_STATE_STOP or JETCENT_ECU_STATE_STOP_ERROR or JETCENT_ECU_STATE_RUNNING
JETCENT_ECU_OFF_IGNITION_ERROR,
JETCENT_ECU_OFF_PREHEAT_ERROR,
JETCENT_ECU_OFF_SWITCHOVER_ERROR,
JETCENT_ECU_OFF_STARTER_MOTOR_ERROR,
JETCENT_ECU_OFF_TO_IDLE_ERROR,
JETCENT_ECU_OFF_ACCELERATION_ERROR,
JETCENT_ECU_OFF_IGNITER_BAD,
JETCENT_ECU_OFF_MIN_PUMP_OK,
JETCENT_ECU_OFF_MAX_PUMP_OK,
JETCENT_ECU_OFF_LOW_RX_BATTERY,
JETCENT_ECU_OFF_LOW_ECU_BATTERY,
JETCENT_ECU_OFF_NO_RX,
JETCENT_ECU_OFF_TRIM_DOWN,
JETCENT_ECU_OFF_TRIM_UP,
JETCENT_ECU_OFF_FAILSAFE,
JETCENT_ECU_OFF_FULL,
JETCENT_ECU_OFF_RX_SETUP_ERROR,
JETCENT_ECU_OFF_TEMP_SENSOR_ERROR,
JETCENT_ECU_OFF_COM_TURBINE_ERROR,
JETCENT_ECU_OFF_MAX_TEMP,
JETCENT_ECU_OFF_MAX_AMPS,
JETCENT_ECU_OFF_LOW_RPM,
JETCENT_ECU_OFF_ERROR_RPM_SENSOR,
JETCENT_ECU_OFF_MAX_PUMP,
JETCENT_ECU_MAX_OFF_COND
};
typedef struct
{
UINT8 identifier; // Source device = 0x19
UINT8 sID; // Secondary ID
UINT16 FuelFlowRateMLMin; // (BCD) mL per Minute
UINT32 RestFuelVolumeInTankML; // (BCD) mL remaining in tank
UINT8 ECUbatteryPercent; // (BCD) % battery pack capacity remaining
// 7 bytes left
} STRU_TELE_JETCAT2;
//////////////////////////////////////////////////////////////////////////////
//
// GPS
// Packed-BCD Type
//
//////////////////////////////////////////////////////////////////////////////
//
typedef struct
{
UINT8 identifier; // Source device = 0x16
UINT8 sID; // Secondary ID
UINT16 altitudeLow; // BCD, meters, format 3.1 (Low order of altitude)
UINT32 latitude; // BCD, format 4.4, Degrees * 100 + minutes, less than 100 degrees
UINT32 longitude; // BCD, format 4.4 , Degrees * 100 + minutes, flag indicates > 99 degrees
UINT16 course; // BCD, 3.1
UINT8 HDOP; // BCD, format 1.1
UINT8 GPSflags; // see definitions below
} STRU_TELE_GPS_LOC;
typedef struct
{
UINT8 identifier; // Source device = 0x17
UINT8 sID; // Secondary ID
UINT16 speed; // BCD, knots, format 3.1
UINT32 UTC; // BCD, format HH:MM:SS.S, format 6.1
UINT8 numSats; // BCD, 0-99
UINT8 altitudeHigh; // BCD, meters, format 2.0 (High order of altitude)
} STRU_TELE_GPS_STAT;
// GPS flags definitions:
#define GPS_INFO_FLAGS_IS_NORTH_BIT (0)
#define GPS_INFO_FLAGS_IS_NORTH (1 << GPS_INFO_FLAGS_IS_NORTH_BIT)
#define GPS_INFO_FLAGS_IS_EAST_BIT (1)
#define GPS_INFO_FLAGS_IS_EAST (1 << GPS_INFO_FLAGS_IS_EAST_BIT)
#define GPS_INFO_FLAGS_LONGITUDE_GREATER_99_BIT (2)
#define GPS_INFO_FLAGS_LONGITUDE_GREATER_99 (1 << GPS_INFO_FLAGS_LONGITUDE_GREATER_99_BIT)
#define GPS_INFO_FLAGS_GPS_FIX_VALID_BIT (3)
#define GPS_INFO_FLAGS_GPS_FIX_VALID (1 << GPS_INFO_FLAGS_GPS_FIX_VALID_BIT)
#define GPS_INFO_FLAGS_GPS_DATA_RECEIVED_BIT (4)
#define GPS_INFO_FLAGS_GPS_DATA_RECEIVED (1 << GPS_INFO_FLAGS_GPS_DATA_RECEIVED_BIT)
#define GPS_INFO_FLAGS_3D_FIX_BIT (5)
#define GPS_INFO_FLAGS_3D_FIX (1 << GPS_INFO_FLAGS_3D_FIX_BIT)
#define GPS_INFO_FLAGS_NEGATIVE_ALT_BIT (7)
#define GPS_INFO_FLAGS_NEGATIVE_ALT (1 << GPS_INFO_FLAGS_NEGATIVE_ALT_BIT)
//////////////////////////////////////////////////////////////////////////////
//
// GPS
// Binary Type
//
// NOTE: Data resolution for all fields matches Crossfire EXCEPT speed.
//
//////////////////////////////////////////////////////////////////////////////
//
typedef struct
{
UINT8 identifier; // Source device = 0x26
UINT8 sID; // Secondary ID
UINT16 altitude; // m, 1000m offset
INT32 latitude; // degree / 10,000,000
INT32 longitude; // degree / 10,000,000
UINT16 heading; // degree / 10
UINT8 groundSpeed; // km/h
UINT8 numSats; // count
} STRU_TELE_GPS_BINARY;
//////////////////////////////////////////////////////////////////////////////
//
// AS3X Legacy Gain Report
//
//////////////////////////////////////////////////////////////////////////////
//
typedef struct
{
UINT8 identifier; // Source device = TELE_DEVICE_AS3X_LEGACYGAIN
UINT8 sID; // Secondary ID
UINT8 gainRoll; // Configured normal gains per axis
UINT8 gainPitch;
UINT8 gainYaw;
UINT8 headRoll; // Configured heading hold gains per axis
UINT8 headPitch;
UINT8 headYaw;
UINT8 activeRoll; // Active gains per axis (as affected by FM channel)
UINT8 activePitch;
UINT8 activeYaw;
UINT8 flightMode; // bit 7 1 --> FM present in bits 0,1 except 0xFF --> not present
UINT8 unused[4];
} STRU_TELE_AS3X_LEGACY;
//////////////////////////////////////////////////////////////////////////////
//
// AS6X Gain Report (AS3X Legacy + more fields)
//
//////////////////////////////////////////////////////////////////////////////
//
typedef struct
{
UINT8 identifier; // Source device = TELE_DEVICE_AS6X_GAIN
UINT8 sID; // Secondary ID
UINT8 gainRoll; // Configured normal gains per axis
UINT8 gainPitch;
UINT8 gainYaw;
UINT8 headRoll; // Configured heading hold gains per axis
UINT8 headPitch;
UINT8 headYaw;
UINT8 activeRoll; // Active gains per axis (as affected by FM channel)
UINT8 activePitch;
UINT8 activeYaw;
UINT8 flightMode; // bit 7 1 --> FM present in bits 0,1 except 0xFF --> not present
// new fields go here:
UINT8 unused[4];
} STRU_TELE_AS6X_GAIN;
//////////////////////////////////////////////////////////////////////////////
//
// GYRO
//
//////////////////////////////////////////////////////////////////////////////
//
typedef struct
{
UINT8 identifier; // Source device = 0x1A
UINT8 sID; // Secondary ID
INT16 gyroX; // Rotation rates of the body - Rate is about the X Axis which is defined out the nose of the vehicle.
INT16 gyroY; // Units are 0.1 deg/sec - Rate is about the Y Axis which is define out the right wing of the vehicle.
INT16 gyroZ; // Rate is about the Z axis which is defined down from the vehicle.
INT16 maxGyroX; // Max rates (absolute value)
INT16 maxGyroY;
INT16 maxGyroZ;
} STRU_TELE_GYRO;
//////////////////////////////////////////////////////////////////////////////
//
// Alpha6 Stabilizer
//
//////////////////////////////////////////////////////////////////////////////
//
typedef struct
{
UINT8 identifier; // Source device = 0x24
UINT8 sID; // Secondary ID
UINT16 volts; // 0.01V increments
UINT8 state_FM; // Flight Mode and System State (see below)
UINT8 gainRoll, // Roll Gain, high bit --> Heading Hold
gainPitch, // Pitch Gain
gainYaw; // Yaw Gain
INT16 attRoll, // Roll Attitude, 0.1degree, RHR
attPitch, // Pitch Attitude
attYaw; // Yaw Attitude
UINT16 spare;
} STRU_TELE_ALPHA6;
#define GBOX_STATE_BOOT (0x00) // Alpha6 State - Boot
#define GBOX_STATE_INIT (0x01) // Init
#define GBOX_STATE_READY (0x02) // Ready
#define GBOX_STATE_SENSORFAULT (0x03) // Sensor Fault
#define GBOX_STATE_POWERFAULT (0x04) // Power Fault
#define GBOX_STATE_MASK (0x0F)
#define GBOX_FMODE_FM0 (0x00) // FM0 through FM4
#define GBOX_FMODE_FM1 (0x10)
#define GBOX_FMODE_FM2 (0x20)
#define GBOX_FMODE_FM3 (0x30)
#define GBOX_FMODE_FM4 (0x40)
#define GBOX_FMODE_PANIC (0x50)
#define GBOX_FMODE_MASK (0xF0)
//////////////////////////////////////////////////////////////////////////////
//
// ATTITUDE & MAG COMPASS
//
//////////////////////////////////////////////////////////////////////////////
//
typedef struct
{
UINT8 identifier; // Source device = 0x1B
UINT8 sID; // Secondary ID
INT16 attRoll; // Attitude, 3 axes. Roll is a rotation about the X Axis of the vehicle using the RHR.
INT16 attPitch; // Units are 0.1 deg - Pitch is a rotation about the Y Axis of the vehicle using the RHR.
INT16 attYaw; // Yaw is a rotation about the Z Axis of the vehicle using the RHR.
INT16 magX; // Magnetic Compass, 3 axes
INT16 magY; // Units are 0.1mG
INT16 magZ; //
UINT16 heading; // Heading, 0.1deg
} STRU_TELE_ATTMAG;
//////////////////////////////////////////////////////////////////////////////
//
// Altitude "Zero" Message
//
//////////////////////////////////////////////////////////////////////////////
//
typedef struct
{
UINT8 identifier; // Source device = 0x7B
UINT8 sID; // Secondary ID
UINT8 spare[2];
UINT32 altOffset; // Altitude "zero" log
} STRU_TELE_ALT_ZERO;
//////////////////////////////////////////////////////////////////////////////
//
// Real-Time Clock
//
//////////////////////////////////////////////////////////////////////////////
//
typedef struct
{
UINT8 identifier; // Source device = 0x7C
UINT8 sID; // Secondary ID
UINT8 spare[6];
UINT64 UTC64; // Linux 64-bit time_t for post-2038 date compatibility
} STRU_TELE_RTC;
//////////////////////////////////////////////////////////////////////////////
//
// V-Speak (Placeholder)
//
//////////////////////////////////////////////////////////////////////////////
//
typedef struct
{
UINT8 identifier; // Source device = 0x61
UINT8 sID; // Secondary ID
UINT8 spare[14]; // Format TBD by V-Speak
} STRU_TELE_V_SPEAK;
//////////////////////////////////////////////////////////////////////////////
//
// www.Smoke-EL.de
//
//////////////////////////////////////////////////////////////////////////////
//
typedef struct
{
UINT8 identifier; // Source device = 0x61
UINT8 sID; // Secondary ID
UINT16 batteryV; // 0.01V, Range 0.00-70.00V
UINT16 countdown; // 0.01s, Range 0.00-30.00s
INT16 GForce; // 0.01g, Range = +/-8.00g
UINT8 cutoff; // 1 count, Range 0-9
UINT8 connected; // 0=not connected, 1=connected, x = TBD
UINT16 spare[3];
} STRU_TELE_SMOKE_EL;
//////////////////////////////////////////////////////////////////////////////
//
// MULTI-CYLINDER SENSOR
//
//////////////////////////////////////////////////////////////////////////////
//
typedef struct
{
UINT8 identifier; // Source device = TELE_DEVICE_MULTICYLINDER
UINT8 sID; // Secondary ID
UINT8 temperature[9]; // Temperature, 1C increments, Offset = 30C, 0xFF = NO DATA
// 0x00 = 30C (86F)
// 0x01 = 31C ... (88F)
// 0xFE = 284C (543F)
// 0xFF = NO SENSOR ATTACHED. Note that sensors must be installed cylinder 1-9 in sequence!
UINT8 throttlePct; // Throttle percent (0-100% typical, 0xFF = NO DATA)
UINT16 RPM; // 4 RPM increments, Offset = 400RPM, range 404-16776.
// 0x000 = 0 RPM
// 0x001 = 404 RPM
// 0x002 = 408 RPM
// 0xFFE = 16776 RPM
// 0xFFF = NO SENSOR ATTACHED
// NOTE: HI NYBBLE RESERVED, set to 0xF to mark "NO DATA" for now
UINT8 batteryV; // Voltage, 0.1V increments, Offset = 3.5V, 0xFF = NO DATA
// 0x00 = 3.5V
// 0x01 = 3.6V
// 0xFE = 28.9V
// 0xFF = NO SENSOR ATTACHED
UINT8 spare; // 0xFF --> no data
} STRU_TELE_MULTI_TEMP;
//////////////////////////////////////////////////////////////////////////////
//
// Transmitter Frame Data
//
//////////////////////////////////////////////////////////////////////////////
//
typedef struct
{
UINT8 identifier; // Source device = 0x7D
UINT8 sID; // Secondary ID
UINT16 chanData[7]; // Channel Data array
} STRU_TELE_FRAMEDATA;
//////////////////////////////////////////////////////////////////////////////
//
// AHRS Monitor
//
//////////////////////////////////////////////////////////////////////////////
//
typedef struct
{
UINT8 identifier; // Source device = TELE_DEVICE_AHRS
UINT8 sID; // Secondary ID
INT16 attRoll; // Attitude, 3 axes. Roll is a rotation about the X Axis of the vehicle using the RHR.
INT16 attPitch; // Units are 0.1 deg - Pitch is a rotation about the Y Axis of the vehicle using the RHR.
INT16 attYaw; // Roll is a rotation about the Z Axis of the vehicle using the RHR.
INT16 altitude; // .1m increments
UINT8 waypoint; // Waypoint number
UINT8 spare8;
UINT16 spare16[2];
} STRU_TELE_AHRS; // AHRS data from rx
//////////////////////////////////////////////////////////////////////////////
//
// FLIGHT MODE
//
//////////////////////////////////////////////////////////////////////////////
//
typedef struct
{
UINT8 identifier; // Source device = 0x05 TELE_DEVICE_FLITECTRL
UINT8 sID; // Secondary ID
UINT8 fMode, // Current flight mode (low nybble)
spare8;
UINT16 spare[6]; // Growth
// Ideas -
// arming status in a bitmap
// time in state
} STRU_TELE_FLITECTRL;
//////////////////////////////////////////////////////////////////////////////
//
// Crossfire QOS
//
//////////////////////////////////////////////////////////////////////////////
//
typedef struct
{
UINT8 identifier; // Source device = TELE_XRF_LINKSTATUS
UINT8 sID; // Secondary ID
UINT8 ant1, // dBm * -1
ant2,
quality; // %
INT8 SNR; // dB
UINT8 activeAnt, // ant1=0, ant2=1
RFmode, // 4fps=0, 50fps, 150Hz
upPower, // 0mW=0, 10mW, 25mW, 100mW, 500mW, 1000mW, 2000mW
downlink, // dBm * -1
qualityDown; // %
INT8 SNRdown; // dB
} STRU_TELE_XF_QOS;
//////////////////////////////////////////////////////////////////////////////
//
// RPM/Volts/Temperature
//
//////////////////////////////////////////////////////////////////////////////
//
// Uses big-endian byte order
//
typedef struct
{
UINT8 identifier; // Source device = 0x7E
UINT8 sID; // Secondary ID
UINT16 microseconds; // microseconds between pulse leading edges
UINT16 volts; // 0.01V increments (typically flight pack voltage)
INT16 temperature; // Temperature in degrees F. 0x7FFF = "No Data"
INT8 dBm_A, // Avg RSSI in dBm (<-1 = dBm, 0 = no data, >0 = % range) -- (legacy)antenna A in dBm
dBm_B; // Avg RSSI in % (<-1 = dBm, 0 = no data, >0 = % range) -- (legacy)antenna B in dBm
// Note: Legacy use as antenna A/B dBm values is still supported. If only 1 antenna, set B = A.
// The "no data" value is 0, but -1 (0xFF) is treated the same for backwards compatibility
UINT16 spare[2];
} STRU_TELE_RPM;
//////////////////////////////////////////////////////////////////////////////
//
// QoS DATA
//
//////////////////////////////////////////////////////////////////////////////
//
// NOTE: AR6410-series send:
// id = 7F
// sID = 0
// A = 0
// B = 0
// L = 0
// R = 0
// F = fades
// H = holds
// rxV = 0xFFFF
//
typedef struct
{
UINT8 identifier; // Source device = 0x7F
UINT8 sID; // Secondary ID
UINT16 A; // Internal/base receiver fades. 0xFFFF = "No data"
UINT16 B; // Remote receiver fades. 0xFFFF = "No data"
UINT16 L; // Third receiver fades. 0xFFFF = "No data"
UINT16 R; // Fourth receiver fades. 0xFFFF = "No data"
UINT16 F; // Frame losses. 0xFFFF = "No data"
UINT16 H; // Holds. 0xFFFF = "No data"
UINT16 rxVoltage; // Volts, .01V increment. 0xFFFF = "No data"
} STRU_TELE_QOS;
//////////////////////////////////////////////////////////////////////////////
//
// UNION OF ALL DEVICE MESSAGES
//
//////////////////////////////////////////////////////////////////////////////
//
typedef union
{
UINT16 raw[8];
STRU_TELE_QOS qos;
STRU_TELE_RPM rpm;
STRU_TELE_HV hv;
STRU_TELE_TEMP temp;
STRU_TELE_IHIGH amps;
STRU_TELE_ALT alt;
STRU_TELE_SPEED speed;
STRU_TELE_ESC escSPM;
STRU_TELE_VARIO_S varioSimple;
STRU_TELE_G_METER accel;
STRU_TELE_JETCAT jetcat;
STRU_TELE_JETCAT2 jetcat2;
STRU_TELE_GPS_LOC gpsloc;
STRU_TELE_GPS_STAT gpsstat;
STRU_TELE_GPS_BINARY gpsbin;
STRU_TELE_AS3X_LEGACY as3x;
STRU_TELE_AS6X_GAIN as6x;
STRU_TELE_GYRO gyro;
STRU_TELE_ALPHA6 alpha6;
STRU_TELE_ATTMAG attMag;
STRU_TELE_POWERBOX powerBox;
STRU_TELE_RX_MAH rxMAH;
STRU_TELE_FP_MAH fpMAH;
STRU_TELE_ESC esc;
STRU_TELE_FUEL fuel;
STRU_TELE_DIGITAL_AIR digAir;
STRU_TELE_STRAIN strain;
STRU_TELE_LIPOMON lipomon;
STRU_TELE_LIPOMON_14 lipomon14;
STRU_SMARTBATT_HEADER smartBatt_header;
STRU_SMARTBATT_REALTIME smartBatt_realtime;
STRU_SMARTBATT_CELLS smartBatt_cells;
STRU_SMARTBATT_ID smartBatt_ID;
STRU_SMARTBATT_LIMITS smartBatt_limits;
STRU_TELE_USER_16SU user_16SU;
STRU_TELE_USER_16SU32U user_16SU32U;
STRU_TELE_USER_16SU32S user_16SU32S;
STRU_TELE_USER_16U32SU user_16U32SU;
STRU_TELE_TEXTGEN textgen;
STRU_TELE_VTX vtx;
STRU_TELE_V_SPEAK vSpeak;
STRU_TELE_SMOKE_EL smoke_el;
STRU_TELE_MULTI_TEMP multiCylinder;
STRU_TELE_FLITECTRL fControl;
STRU_TELE_TILT tilt;
STRU_TELE_XF_QOS xfire;
} UN_TELEMETRY; // All telemetry messages
//////////////////////////////////////////////////////////////////
//
// sID Field Functionality
//
//////////////////////////////////////////////////////////////////
//
// if .sID == 0x00 then .identifier = device type (TELE_DEVICE_xxx) and address I2C bus
// if .sID != 0x00 then .sID = device type and .identifer = address on I2C bus
#endif