cpython/Doc/reference/simple_stmts.rst

991 lines
38 KiB
ReStructuredText

.. _simple:
*****************
Simple statements
*****************
.. index:: pair: simple; statement
Simple statements are comprised within a single logical line. Several simple
statements may occur on a single line separated by semicolons. The syntax for
simple statements is:
.. productionlist::
simple_stmt: `expression_stmt`
: | `assert_stmt`
: | `assignment_stmt`
: | `augmented_assignment_stmt`
: | `pass_stmt`
: | `del_stmt`
: | `return_stmt`
: | `yield_stmt`
: | `raise_stmt`
: | `break_stmt`
: | `continue_stmt`
: | `import_stmt`
: | `global_stmt`
: | `nonlocal_stmt`
.. _exprstmts:
Expression statements
=====================
.. index::
pair: expression; statement
pair: expression; list
.. index:: pair: expression; list
Expression statements are used (mostly interactively) to compute and write a
value, or (usually) to call a procedure (a function that returns no meaningful
result; in Python, procedures return the value ``None``). Other uses of
expression statements are allowed and occasionally useful. The syntax for an
expression statement is:
.. productionlist::
expression_stmt: `expression_list`
An expression statement evaluates the expression list (which may be a single
expression).
.. index::
builtin: repr
object: None
pair: string; conversion
single: output
pair: standard; output
pair: writing; values
pair: procedure; call
In interactive mode, if the value is not ``None``, it is converted to a string
using the built-in :func:`repr` function and the resulting string is written to
standard output on a line by itself (except if the result is ``None``, so that
procedure calls do not cause any output.)
.. _assignment:
Assignment statements
=====================
.. index::
pair: assignment; statement
pair: binding; name
pair: rebinding; name
object: mutable
pair: attribute; assignment
Assignment statements are used to (re)bind names to values and to modify
attributes or items of mutable objects:
.. productionlist::
assignment_stmt: (`target_list` "=")+ (`expression_list` | `yield_expression`)
target_list: `target` ("," `target`)* [","]
target: `identifier`
: | "(" `target_list` ")"
: | "[" `target_list` "]"
: | `attributeref`
: | `subscription`
: | `slicing`
: | "*" `target`
(See section :ref:`primaries` for the syntax definitions for the last three
symbols.)
An assignment statement evaluates the expression list (remember that this can be
a single expression or a comma-separated list, the latter yielding a tuple) and
assigns the single resulting object to each of the target lists, from left to
right.
.. index::
single: target
pair: target; list
Assignment is defined recursively depending on the form of the target (list).
When a target is part of a mutable object (an attribute reference, subscription
or slicing), the mutable object must ultimately perform the assignment and
decide about its validity, and may raise an exception if the assignment is
unacceptable. The rules observed by various types and the exceptions raised are
given with the definition of the object types (see section :ref:`types`).
.. index:: triple: target; list; assignment
Assignment of an object to a target list, optionally enclosed in parentheses or
square brackets, is recursively defined as follows.
* If the target list is a single target: The object is assigned to that target.
* If the target list is a comma-separated list of targets: The object must be an
iterable with the same number of items as there are targets in the target list,
and the items are assigned, from left to right, to the corresponding targets.
* If the target list contains one target prefixed with an asterisk, called a
"starred" target: The object must be a sequence with at least as many items
as there are targets in the target list, minus one. The first items of the
sequence are assigned, from left to right, to the targets before the starred
target. The final items of the sequence are assigned to the targets after
the starred target. A list of the remaining items in the sequence is then
assigned to the starred target (the list can be empty).
* Else: The object must be a sequence with the same number of items as there
are targets in the target list, and the items are assigned, from left to
right, to the corresponding targets.
Assignment of an object to a single target is recursively defined as follows.
* If the target is an identifier (name):
* If the name does not occur in a :keyword:`global` or :keyword:`nonlocal`
statement in the current code block: the name is bound to the object in the
current local namespace.
* Otherwise: the name is bound to the object in the global namespace or the
outer namespace determined by :keyword:`nonlocal`, respectively.
.. index:: single: destructor
The name is rebound if it was already bound. This may cause the reference
count for the object previously bound to the name to reach zero, causing the
object to be deallocated and its destructor (if it has one) to be called.
* If the target is a target list enclosed in parentheses or in square brackets:
The object must be an iterable with the same number of items as there are
targets in the target list, and its items are assigned, from left to right,
to the corresponding targets.
.. index:: pair: attribute; assignment
* If the target is an attribute reference: The primary expression in the
reference is evaluated. It should yield an object with assignable attributes;
if this is not the case, :exc:`TypeError` is raised. That object is then
asked to assign the assigned object to the given attribute; if it cannot
perform the assignment, it raises an exception (usually but not necessarily
:exc:`AttributeError`).
.. _attr-target-note:
Note: If the object is a class instance and the attribute reference occurs on
both sides of the assignment operator, the RHS expression, ``a.x`` can access
either an instance attribute or (if no instance attribute exists) a class
attribute. The LHS target ``a.x`` is always set as an instance attribute,
creating it if necessary. Thus, the two occurrences of ``a.x`` do not
necessarily refer to the same attribute: if the RHS expression refers to a
class attribute, the LHS creates a new instance attribute as the target of the
assignment::
class Cls:
x = 3 # class variable
inst = Cls()
inst.x = inst.x + 1 # writes inst.x as 4 leaving Cls.x as 3
This description does not necessarily apply to descriptor attributes, such as
properties created with :func:`property`.
.. index::
pair: subscription; assignment
object: mutable
* If the target is a subscription: The primary expression in the reference is
evaluated. It should yield either a mutable sequence object (such as a list)
or a mapping object (such as a dictionary). Next, the subscript expression is
evaluated.
.. index::
object: sequence
object: list
If the primary is a mutable sequence object (such as a list), the subscript
must yield an integer. If it is negative, the sequence's length is added to
it. The resulting value must be a nonnegative integer less than the
sequence's length, and the sequence is asked to assign the assigned object to
its item with that index. If the index is out of range, :exc:`IndexError` is
raised (assignment to a subscripted sequence cannot add new items to a list).
.. index::
object: mapping
object: dictionary
If the primary is a mapping object (such as a dictionary), the subscript must
have a type compatible with the mapping's key type, and the mapping is then
asked to create a key/datum pair which maps the subscript to the assigned
object. This can either replace an existing key/value pair with the same key
value, or insert a new key/value pair (if no key with the same value existed).
For user-defined objects, the :meth:`__setitem__` method is called with
appropriate arguments.
.. index:: pair: slicing; assignment
* If the target is a slicing: The primary expression in the reference is
evaluated. It should yield a mutable sequence object (such as a list). The
assigned object should be a sequence object of the same type. Next, the lower
and upper bound expressions are evaluated, insofar they are present; defaults
are zero and the sequence's length. The bounds should evaluate to integers.
If either bound is negative, the sequence's length is added to it. The
resulting bounds are clipped to lie between zero and the sequence's length,
inclusive. Finally, the sequence object is asked to replace the slice with
the items of the assigned sequence. The length of the slice may be different
from the length of the assigned sequence, thus changing the length of the
target sequence, if the object allows it.
.. impl-detail::
In the current implementation, the syntax for targets is taken to be the same
as for expressions, and invalid syntax is rejected during the code generation
phase, causing less detailed error messages.
WARNING: Although the definition of assignment implies that overlaps between the
left-hand side and the right-hand side are 'safe' (for example ``a, b = b, a``
swaps two variables), overlaps *within* the collection of assigned-to variables
are not safe! For instance, the following program prints ``[0, 2]``::
x = [0, 1]
i = 0
i, x[i] = 1, 2
print(x)
.. seealso::
:pep:`3132` - Extended Iterable Unpacking
The specification for the ``*target`` feature.
.. _augassign:
Augmented assignment statements
-------------------------------
.. index::
pair: augmented; assignment
single: statement; assignment, augmented
Augmented assignment is the combination, in a single statement, of a binary
operation and an assignment statement:
.. productionlist::
augmented_assignment_stmt: `augtarget` `augop` (`expression_list` | `yield_expression`)
augtarget: `identifier` | `attributeref` | `subscription` | `slicing`
augop: "+=" | "-=" | "*=" | "/=" | "//=" | "%=" | "**="
: | ">>=" | "<<=" | "&=" | "^=" | "|="
(See section :ref:`primaries` for the syntax definitions for the last three
symbols.)
An augmented assignment evaluates the target (which, unlike normal assignment
statements, cannot be an unpacking) and the expression list, performs the binary
operation specific to the type of assignment on the two operands, and assigns
the result to the original target. The target is only evaluated once.
An augmented assignment expression like ``x += 1`` can be rewritten as ``x = x +
1`` to achieve a similar, but not exactly equal effect. In the augmented
version, ``x`` is only evaluated once. Also, when possible, the actual operation
is performed *in-place*, meaning that rather than creating a new object and
assigning that to the target, the old object is modified instead.
With the exception of assigning to tuples and multiple targets in a single
statement, the assignment done by augmented assignment statements is handled the
same way as normal assignments. Similarly, with the exception of the possible
*in-place* behavior, the binary operation performed by augmented assignment is
the same as the normal binary operations.
For targets which are attribute references, the same :ref:`caveat about class
and instance attributes <attr-target-note>` applies as for regular assignments.
.. _assert:
The :keyword:`assert` statement
===============================
.. index::
statement: assert
pair: debugging; assertions
Assert statements are a convenient way to insert debugging assertions into a
program:
.. productionlist::
assert_stmt: "assert" `expression` ["," `expression`]
The simple form, ``assert expression``, is equivalent to ::
if __debug__:
if not expression: raise AssertionError
The extended form, ``assert expression1, expression2``, is equivalent to ::
if __debug__:
if not expression1: raise AssertionError(expression2)
.. index::
single: __debug__
exception: AssertionError
These equivalences assume that :const:`__debug__` and :exc:`AssertionError` refer to
the built-in variables with those names. In the current implementation, the
built-in variable :const:`__debug__` is ``True`` under normal circumstances,
``False`` when optimization is requested (command line option -O). The current
code generator emits no code for an assert statement when optimization is
requested at compile time. Note that it is unnecessary to include the source
code for the expression that failed in the error message; it will be displayed
as part of the stack trace.
Assignments to :const:`__debug__` are illegal. The value for the built-in variable
is determined when the interpreter starts.
.. _pass:
The :keyword:`pass` statement
=============================
.. index::
statement: pass
pair: null; operation
pair: null; operation
.. productionlist::
pass_stmt: "pass"
:keyword:`pass` is a null operation --- when it is executed, nothing happens.
It is useful as a placeholder when a statement is required syntactically, but no
code needs to be executed, for example::
def f(arg): pass # a function that does nothing (yet)
class C: pass # a class with no methods (yet)
.. _del:
The :keyword:`del` statement
============================
.. index::
statement: del
pair: deletion; target
triple: deletion; target; list
.. productionlist::
del_stmt: "del" `target_list`
Deletion is recursively defined very similar to the way assignment is defined.
Rather than spelling it out in full details, here are some hints.
Deletion of a target list recursively deletes each target, from left to right.
.. index::
statement: global
pair: unbinding; name
Deletion of a name removes the binding of that name from the local or global
namespace, depending on whether the name occurs in a :keyword:`global` statement
in the same code block. If the name is unbound, a :exc:`NameError` exception
will be raised.
.. index:: pair: attribute; deletion
Deletion of attribute references, subscriptions and slicings is passed to the
primary object involved; deletion of a slicing is in general equivalent to
assignment of an empty slice of the right type (but even this is determined by
the sliced object).
.. versionchanged:: 3.2
Previously it was illegal to delete a name from the local namespace if it
occurs as a free variable in a nested block.
.. _return:
The :keyword:`return` statement
===============================
.. index::
statement: return
pair: function; definition
pair: class; definition
.. productionlist::
return_stmt: "return" [`expression_list`]
:keyword:`return` may only occur syntactically nested in a function definition,
not within a nested class definition.
If an expression list is present, it is evaluated, else ``None`` is substituted.
:keyword:`return` leaves the current function call with the expression list (or
``None``) as return value.
.. index:: keyword: finally
When :keyword:`return` passes control out of a :keyword:`try` statement with a
:keyword:`finally` clause, that :keyword:`finally` clause is executed before
really leaving the function.
In a generator function, the :keyword:`return` statement is not allowed to
include an :token:`expression_list`. In that context, a bare :keyword:`return`
indicates that the generator is done and will cause :exc:`StopIteration` to be
raised.
.. _yield:
The :keyword:`yield` statement
==============================
.. index::
statement: yield
single: generator; function
single: generator; iterator
single: function; generator
exception: StopIteration
.. productionlist::
yield_stmt: `yield_expression`
The :keyword:`yield` statement is only used when defining a generator function,
and is only used in the body of the generator function. Using a :keyword:`yield`
statement in a function definition is sufficient to cause that definition to
create a generator function instead of a normal function.
When a generator function is called, it returns an iterator known as a generator
iterator, or more commonly, a generator. The body of the generator function is
executed by calling the :func:`next` function on the generator repeatedly until
it raises an exception.
When a :keyword:`yield` statement is executed, the state of the generator is
frozen and the value of :token:`expression_list` is returned to :meth:`next`'s
caller. By "frozen" we mean that all local state is retained, including the
current bindings of local variables, the instruction pointer, and the internal
evaluation stack: enough information is saved so that the next time :func:`next`
is invoked, the function can proceed exactly as if the :keyword:`yield`
statement were just another external call.
The :keyword:`yield` statement is allowed in the :keyword:`try` clause of a
:keyword:`try` ... :keyword:`finally` construct. If the generator is not
resumed before it is finalized (by reaching a zero reference count or by being
garbage collected), the generator-iterator's :meth:`close` method will be
called, allowing any pending :keyword:`finally` clauses to execute.
.. seealso::
:pep:`0255` - Simple Generators
The proposal for adding generators and the :keyword:`yield` statement to Python.
:pep:`0342` - Coroutines via Enhanced Generators
The proposal that, among other generator enhancements, proposed allowing
:keyword:`yield` to appear inside a :keyword:`try` ... :keyword:`finally` block.
.. _raise:
The :keyword:`raise` statement
==============================
.. index::
statement: raise
single: exception
pair: raising; exception
single: __traceback__ (exception attribute)
.. productionlist::
raise_stmt: "raise" [`expression` ["from" `expression`]]
If no expressions are present, :keyword:`raise` re-raises the last exception
that was active in the current scope. If no exception is active in the current
scope, a :exc:`RuntimeError` exception is raised indicating that this is an
error.
Otherwise, :keyword:`raise` evaluates the first expression as the exception
object. It must be either a subclass or an instance of :class:`BaseException`.
If it is a class, the exception instance will be obtained when needed by
instantiating the class with no arguments.
The :dfn:`type` of the exception is the exception instance's class, the
:dfn:`value` is the instance itself.
.. index:: object: traceback
A traceback object is normally created automatically when an exception is raised
and attached to it as the :attr:`__traceback__` attribute, which is writable.
You can create an exception and set your own traceback in one step using the
:meth:`with_traceback` exception method (which returns the same exception
instance, with its traceback set to its argument), like so::
raise Exception("foo occurred").with_traceback(tracebackobj)
.. index:: pair: exception; chaining
__cause__ (exception attribute)
__context__ (exception attribute)
The ``from`` clause is used for exception chaining: if given, the second
*expression* must be another exception class or instance, which will then be
attached to the raised exception as the :attr:`__cause__` attribute (which is
writable). If the raised exception is not handled, both exceptions will be
printed::
>>> try:
... print(1 / 0)
... except Exception as exc:
... raise RuntimeError("Something bad happened") from exc
...
Traceback (most recent call last):
File "<stdin>", line 2, in <module>
ZeroDivisionError: int division or modulo by zero
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "<stdin>", line 4, in <module>
RuntimeError: Something bad happened
A similar mechanism works implicitly if an exception is raised inside an
exception handler: the previous exception is then attached as the new
exception's :attr:`__context__` attribute::
>>> try:
... print(1 / 0)
... except:
... raise RuntimeError("Something bad happened")
...
Traceback (most recent call last):
File "<stdin>", line 2, in <module>
ZeroDivisionError: int division or modulo by zero
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "<stdin>", line 4, in <module>
RuntimeError: Something bad happened
Additional information on exceptions can be found in section :ref:`exceptions`,
and information about handling exceptions is in section :ref:`try`.
.. _break:
The :keyword:`break` statement
==============================
.. index::
statement: break
statement: for
statement: while
pair: loop; statement
.. productionlist::
break_stmt: "break"
:keyword:`break` may only occur syntactically nested in a :keyword:`for` or
:keyword:`while` loop, but not nested in a function or class definition within
that loop.
.. index:: keyword: else
pair: loop control; target
It terminates the nearest enclosing loop, skipping the optional :keyword:`else`
clause if the loop has one.
If a :keyword:`for` loop is terminated by :keyword:`break`, the loop control
target keeps its current value.
.. index:: keyword: finally
When :keyword:`break` passes control out of a :keyword:`try` statement with a
:keyword:`finally` clause, that :keyword:`finally` clause is executed before
really leaving the loop.
.. _continue:
The :keyword:`continue` statement
=================================
.. index::
statement: continue
statement: for
statement: while
pair: loop; statement
keyword: finally
.. productionlist::
continue_stmt: "continue"
:keyword:`continue` may only occur syntactically nested in a :keyword:`for` or
:keyword:`while` loop, but not nested in a function or class definition or
:keyword:`finally` clause within that loop. It continues with the next
cycle of the nearest enclosing loop.
When :keyword:`continue` passes control out of a :keyword:`try` statement with a
:keyword:`finally` clause, that :keyword:`finally` clause is executed before
really starting the next loop cycle.
.. _import:
.. _from:
The :keyword:`import` statement
===============================
.. index::
statement: import
single: module; importing
pair: name; binding
keyword: from
.. productionlist::
import_stmt: "import" `module` ["as" `name`] ( "," `module` ["as" `name`] )*
: | "from" `relative_module` "import" `identifier` ["as" `name`]
: ( "," `identifier` ["as" `name`] )*
: | "from" `relative_module` "import" "(" `identifier` ["as" `name`]
: ( "," `identifier` ["as" `name`] )* [","] ")"
: | "from" `module` "import" "*"
module: (`identifier` ".")* `identifier`
relative_module: "."* `module` | "."+
name: `identifier`
Import statements are executed in two steps: (1) find a module, and initialize
it if necessary; (2) define a name or names in the local namespace (of the scope
where the :keyword:`import` statement occurs). The statement comes in two
forms differing on whether it uses the :keyword:`from` keyword. The first form
(without :keyword:`from`) repeats these steps for each identifier in the list.
The form with :keyword:`from` performs step (1) once, and then performs step
(2) repeatedly. For a reference implementation of step (1), see the
:mod:`importlib` module.
.. index::
single: package
To understand how step (1) occurs, one must first understand how Python handles
hierarchical naming of modules. To help organize modules and provide a
hierarchy in naming, Python has a concept of packages. A package can contain
other packages and modules while modules cannot contain other modules or
packages. From a file system perspective, packages are directories and modules
are files. The original `specification for packages
<http://www.python.org/doc/essays/packages.html>`_ is still available to read,
although minor details have changed since the writing of that document.
.. index::
single: sys.modules
Once the name of the module is known (unless otherwise specified, the term
"module" will refer to both packages and modules), searching
for the module or package can begin. The first place checked is
:data:`sys.modules`, the cache of all modules that have been imported
previously. If the module is found there then it is used in step (2) of import
unless ``None`` is found in :data:`sys.modules`, in which case
:exc:`ImportError` is raised.
.. index::
single: sys.meta_path
single: finder
pair: finder; find_module
single: __path__
If the module is not found in the cache, then :data:`sys.meta_path` is searched
(the specification for :data:`sys.meta_path` can be found in :pep:`302`).
The object is a list of :term:`finder` objects which are queried in order as to
whether they know how to load the module by calling their :meth:`find_module`
method with the name of the module. If the module happens to be contained
within a package (as denoted by the existence of a dot in the name), then a
second argument to :meth:`find_module` is given as the value of the
:attr:`__path__` attribute from the parent package (everything up to the last
dot in the name of the module being imported). If a finder can find the module
it returns a :term:`loader` (discussed later) or returns ``None``.
.. index::
single: sys.path_hooks
single: sys.path_importer_cache
single: sys.path
If none of the finders on :data:`sys.meta_path` are able to find the module
then some implicitly defined finders are queried. Implementations of Python
vary in what implicit meta path finders are defined. The one they all do
define, though, is one that handles :data:`sys.path_hooks`,
:data:`sys.path_importer_cache`, and :data:`sys.path`.
The implicit finder searches for the requested module in the "paths" specified
in one of two places ("paths" do not have to be file system paths). If the
module being imported is supposed to be contained within a package then the
second argument passed to :meth:`find_module`, :attr:`__path__` on the parent
package, is used as the source of paths. If the module is not contained in a
package then :data:`sys.path` is used as the source of paths.
Once the source of paths is chosen it is iterated over to find a finder that
can handle that path. The dict at :data:`sys.path_importer_cache` caches
finders for paths and is checked for a finder. If the path does not have a
finder cached then :data:`sys.path_hooks` is searched by calling each object in
the list with a single argument of the path, returning a finder or raises
:exc:`ImportError`. If a finder is returned then it is cached in
:data:`sys.path_importer_cache` and then used for that path entry. If no finder
can be found but the path exists then a value of ``None`` is
stored in :data:`sys.path_importer_cache` to signify that an implicit,
file-based finder that handles modules stored as individual files should be
used for that path. If the path does not exist then a finder which always
returns ``None`` is placed in the cache for the path.
.. index::
single: loader
pair: loader; load_module
exception: ImportError
If no finder can find the module then :exc:`ImportError` is raised. Otherwise
some finder returned a loader whose :meth:`load_module` method is called with
the name of the module to load (see :pep:`302` for the original definition of
loaders). A loader has several responsibilities to perform on a module it
loads. First, if the module already exists in :data:`sys.modules` (a
possibility if the loader is called outside of the import machinery) then it
is to use that module for initialization and not a new module. But if the
module does not exist in :data:`sys.modules` then it is to be added to that
dict before initialization begins. If an error occurs during loading of the
module and it was added to :data:`sys.modules` it is to be removed from the
dict. If an error occurs but the module was already in :data:`sys.modules` it
is left in the dict.
.. index::
single: __name__
single: __file__
single: __path__
single: __package__
single: __loader__
The loader must set several attributes on the module. :data:`__name__` is to be
set to the name of the module. :data:`__file__` is to be the "path" to the file
unless the module is built-in (and thus listed in
:data:`sys.builtin_module_names`) in which case the attribute is not set.
If what is being imported is a package then :data:`__path__` is to be set to a
list of paths to be searched when looking for modules and packages contained
within the package being imported. :data:`__package__` is optional but should
be set to the name of package that contains the module or package (the empty
string is used for module not contained in a package). :data:`__loader__` is
also optional but should be set to the loader object that is loading the
module.
.. index::
exception: ImportError
If an error occurs during loading then the loader raises :exc:`ImportError` if
some other exception is not already being propagated. Otherwise the loader
returns the module that was loaded and initialized.
When step (1) finishes without raising an exception, step (2) can begin.
The first form of :keyword:`import` statement binds the module name in the local
namespace to the module object, and then goes on to import the next identifier,
if any. If the module name is followed by :keyword:`as`, the name following
:keyword:`as` is used as the local name for the module.
.. index::
pair: name; binding
exception: ImportError
The :keyword:`from` form does not bind the module name: it goes through the list
of identifiers, looks each one of them up in the module found in step (1), and
binds the name in the local namespace to the object thus found. As with the
first form of :keyword:`import`, an alternate local name can be supplied by
specifying ":keyword:`as` localname". If a name is not found,
:exc:`ImportError` is raised. If the list of identifiers is replaced by a star
(``'*'``), all public names defined in the module are bound in the local
namespace of the :keyword:`import` statement.
.. index:: single: __all__ (optional module attribute)
The *public names* defined by a module are determined by checking the module's
namespace for a variable named ``__all__``; if defined, it must be a sequence of
strings which are names defined or imported by that module. The names given in
``__all__`` are all considered public and are required to exist. If ``__all__``
is not defined, the set of public names includes all names found in the module's
namespace which do not begin with an underscore character (``'_'``).
``__all__`` should contain the entire public API. It is intended to avoid
accidentally exporting items that are not part of the API (such as library
modules which were imported and used within the module).
The :keyword:`from` form with ``*`` may only occur in a module scope. The wild
card form of import --- ``import *`` --- is only allowed at the module level.
Attempting to use it in class or function definitions will raise a
:exc:`SyntaxError`.
.. index::
single: relative; import
When specifying what module to import you do not have to specify the absolute
name of the module. When a module or package is contained within another
package it is possible to make a relative import within the same top package
without having to mention the package name. By using leading dots in the
specified module or package after :keyword:`from` you can specify how high to
traverse up the current package hierarchy without specifying exact names. One
leading dot means the current package where the module making the import
exists. Two dots means up one package level. Three dots is up two levels, etc.
So if you execute ``from . import mod`` from a module in the ``pkg`` package
then you will end up importing ``pkg.mod``. If you execute ``from ..subpkg2
import mod`` from within ``pkg.subpkg1`` you will import ``pkg.subpkg2.mod``.
The specification for relative imports is contained within :pep:`328`.
:func:`importlib.import_module` is provided to support applications that
determine which modules need to be loaded dynamically.
.. _future:
Future statements
-----------------
.. index:: pair: future; statement
A :dfn:`future statement` is a directive to the compiler that a particular
module should be compiled using syntax or semantics that will be available in a
specified future release of Python. The future statement is intended to ease
migration to future versions of Python that introduce incompatible changes to
the language. It allows use of the new features on a per-module basis before
the release in which the feature becomes standard.
.. productionlist:: *
future_statement: "from" "__future__" "import" feature ["as" name]
: ("," feature ["as" name])*
: | "from" "__future__" "import" "(" feature ["as" name]
: ("," feature ["as" name])* [","] ")"
feature: identifier
name: identifier
A future statement must appear near the top of the module. The only lines that
can appear before a future statement are:
* the module docstring (if any),
* comments,
* blank lines, and
* other future statements.
.. XXX change this if future is cleaned out
The features recognized by Python 3.0 are ``absolute_import``, ``division``,
``generators``, ``unicode_literals``, ``print_function``, ``nested_scopes`` and
``with_statement``. They are all redundant because they are always enabled, and
only kept for backwards compatibility.
A future statement is recognized and treated specially at compile time: Changes
to the semantics of core constructs are often implemented by generating
different code. It may even be the case that a new feature introduces new
incompatible syntax (such as a new reserved word), in which case the compiler
may need to parse the module differently. Such decisions cannot be pushed off
until runtime.
For any given release, the compiler knows which feature names have been defined,
and raises a compile-time error if a future statement contains a feature not
known to it.
The direct runtime semantics are the same as for any import statement: there is
a standard module :mod:`__future__`, described later, and it will be imported in
the usual way at the time the future statement is executed.
The interesting runtime semantics depend on the specific feature enabled by the
future statement.
Note that there is nothing special about the statement::
import __future__ [as name]
That is not a future statement; it's an ordinary import statement with no
special semantics or syntax restrictions.
Code compiled by calls to the built-in functions :func:`exec` and :func:`compile`
that occur in a module :mod:`M` containing a future statement will, by default,
use the new syntax or semantics associated with the future statement. This can
be controlled by optional arguments to :func:`compile` --- see the documentation
of that function for details.
A future statement typed at an interactive interpreter prompt will take effect
for the rest of the interpreter session. If an interpreter is started with the
:option:`-i` option, is passed a script name to execute, and the script includes
a future statement, it will be in effect in the interactive session started
after the script is executed.
.. seealso::
:pep:`236` - Back to the __future__
The original proposal for the __future__ mechanism.
.. _global:
The :keyword:`global` statement
===============================
.. index::
statement: global
triple: global; name; binding
.. productionlist::
global_stmt: "global" `identifier` ("," `identifier`)*
The :keyword:`global` statement is a declaration which holds for the entire
current code block. It means that the listed identifiers are to be interpreted
as globals. It would be impossible to assign to a global variable without
:keyword:`global`, although free variables may refer to globals without being
declared global.
Names listed in a :keyword:`global` statement must not be used in the same code
block textually preceding that :keyword:`global` statement.
Names listed in a :keyword:`global` statement must not be defined as formal
parameters or in a :keyword:`for` loop control target, :keyword:`class`
definition, function definition, or :keyword:`import` statement.
.. impl-detail::
The current implementation does not enforce the latter two restrictions, but
programs should not abuse this freedom, as future implementations may enforce
them or silently change the meaning of the program.
.. index::
builtin: exec
builtin: eval
builtin: compile
**Programmer's note:** the :keyword:`global` is a directive to the parser. It
applies only to code parsed at the same time as the :keyword:`global` statement.
In particular, a :keyword:`global` statement contained in a string or code
object supplied to the built-in :func:`exec` function does not affect the code
block *containing* the function call, and code contained in such a string is
unaffected by :keyword:`global` statements in the code containing the function
call. The same applies to the :func:`eval` and :func:`compile` functions.
.. _nonlocal:
The :keyword:`nonlocal` statement
=================================
.. index:: statement: nonlocal
.. productionlist::
nonlocal_stmt: "nonlocal" `identifier` ("," `identifier`)*
.. XXX add when implemented
: ["=" (`target_list` "=")+ expression_list]
: | "nonlocal" identifier augop expression_list
The :keyword:`nonlocal` statement causes the listed identifiers to refer to
previously bound variables in the nearest enclosing scope. This is important
because the default behavior for binding is to search the local namespace
first. The statement allows encapsulated code to rebind variables outside of
the local scope besides the global (module) scope.
.. XXX not implemented
The :keyword:`nonlocal` statement may prepend an assignment or augmented
assignment, but not an expression.
Names listed in a :keyword:`nonlocal` statement, unlike to those listed in a
:keyword:`global` statement, must refer to pre-existing bindings in an
enclosing scope (the scope in which a new binding should be created cannot
be determined unambiguously).
Names listed in a :keyword:`nonlocal` statement must not collide with
pre-existing bindings in the local scope.
.. seealso::
:pep:`3104` - Access to Names in Outer Scopes
The specification for the :keyword:`nonlocal` statement.