traverseda
/
cpython
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
cpython/Python/ceval_gil.h

410 lines
13 KiB
C
Raw Blame History

/*
* Implementation of the Global Interpreter Lock (GIL).
*/
#include <stdlib.h>
#include <errno.h>
/* First some general settings */
/* microseconds (the Python API uses seconds, though) */
#define DEFAULT_INTERVAL 5000
static unsigned long gil_interval = DEFAULT_INTERVAL;
#define INTERVAL (gil_interval >= 1 ? gil_interval : 1)
/* Enable if you want to force the switching of threads at least every `gil_interval` */
#undef FORCE_SWITCHING
#define FORCE_SWITCHING
/*
Notes about the implementation:
- The GIL is just a boolean variable (gil_locked) whose access is protected
by a mutex (gil_mutex), and whose changes are signalled by a condition
variable (gil_cond). gil_mutex is taken for short periods of time,
and therefore mostly uncontended.
- In the GIL-holding thread, the main loop (PyEval_EvalFrameEx) must be
able to release the GIL on demand by another thread. A volatile boolean
variable (gil_drop_request) is used for that purpose, which is checked
at every turn of the eval loop. That variable is set after a wait of
`interval` microseconds on `gil_cond` has timed out.
[Actually, another volatile boolean variable (eval_breaker) is used
which ORs several conditions into one. Volatile booleans are
sufficient as inter-thread signalling means since Python is run
on cache-coherent architectures only.]
- A thread wanting to take the GIL will first let pass a given amount of
time (`interval` microseconds) before setting gil_drop_request. This
encourages a defined switching period, but doesn't enforce it since
opcodes can take an arbitrary time to execute.
The `interval` value is available for the user to read and modify
using the Python API `sys.{get,set}switchinterval()`.
- When a thread releases the GIL and gil_drop_request is set, that thread
ensures that another GIL-awaiting thread gets scheduled.
It does so by waiting on a condition variable (switch_cond) until
the value of gil_last_holder is changed to something else than its
own thread state pointer, indicating that another thread was able to
take the GIL.
This is meant to prohibit the latency-adverse behaviour on multi-core
machines where one thread would speculatively release the GIL, but still
run and end up being the first to re-acquire it, making the "timeslices"
much longer than expected.
(Note: this mechanism is enabled with FORCE_SWITCHING above)
*/
#ifndef _POSIX_THREADS
/* This means pthreads are not implemented in libc headers, hence the macro
not present in unistd.h. But they still can be implemented as an external
library (e.g. gnu pth in pthread emulation) */
# ifdef HAVE_PTHREAD_H
# include <pthread.h> /* _POSIX_THREADS */
# endif
#endif
#ifdef _POSIX_THREADS
/*
* POSIX support
*/
#include <pthread.h>
#define ADD_MICROSECONDS(tv, interval) \
do { \
tv.tv_usec += (long) interval; \
tv.tv_sec += tv.tv_usec / 1000000; \
tv.tv_usec %= 1000000; \
} while (0)
/* We assume all modern POSIX systems have gettimeofday() */
#ifdef GETTIMEOFDAY_NO_TZ
#define GETTIMEOFDAY(ptv) gettimeofday(ptv)
#else
#define GETTIMEOFDAY(ptv) gettimeofday(ptv, (struct timezone *)NULL)
#endif
#define MUTEX_T pthread_mutex_t
#define MUTEX_INIT(mut) \
if (pthread_mutex_init(&mut, NULL)) { \
Py_FatalError("pthread_mutex_init(" #mut ") failed"); };
#define MUTEX_LOCK(mut) \
if (pthread_mutex_lock(&mut)) { \
Py_FatalError("pthread_mutex_lock(" #mut ") failed"); };
#define MUTEX_UNLOCK(mut) \
if (pthread_mutex_unlock(&mut)) { \
Py_FatalError("pthread_mutex_unlock(" #mut ") failed"); };
#define COND_T pthread_cond_t
#define COND_INIT(cond) \
if (pthread_cond_init(&cond, NULL)) { \
Py_FatalError("pthread_cond_init(" #cond ") failed"); };
#define COND_SIGNAL(cond) \
if (pthread_cond_signal(&cond)) { \
Py_FatalError("pthread_cond_signal(" #cond ") failed"); };
#define COND_WAIT(cond, mut) \
if (pthread_cond_wait(&cond, &mut)) { \
Py_FatalError("pthread_cond_wait(" #cond ") failed"); };
#define COND_TIMED_WAIT(cond, mut, microseconds, timeout_result) \
{ \
int r; \
struct timespec ts; \
struct timeval deadline; \
\
GETTIMEOFDAY(&deadline); \
ADD_MICROSECONDS(deadline, microseconds); \
ts.tv_sec = deadline.tv_sec; \
ts.tv_nsec = deadline.tv_usec * 1000; \
\
r = pthread_cond_timedwait(&cond, &mut, &ts); \
if (r == ETIMEDOUT) \
timeout_result = 1; \
else if (r) \
Py_FatalError("pthread_cond_timedwait(" #cond ") failed"); \
else \
timeout_result = 0; \
} \
#elif defined(NT_THREADS)
/*
* Windows (2000 and later, as well as (hopefully) CE) support
*/
#include <windows.h>
#define MUTEX_T CRITICAL_SECTION
#define MUTEX_INIT(mut) do { \
if (!(InitializeCriticalSectionAndSpinCount(&(mut), 4000))) \
Py_FatalError("CreateMutex(" #mut ") failed"); \
} while (0)
#define MUTEX_FINI(mut) \
DeleteCriticalSection(&(mut))
#define MUTEX_LOCK(mut) \
EnterCriticalSection(&(mut))
#define MUTEX_UNLOCK(mut) \
LeaveCriticalSection(&(mut))
/* We emulate condition variables with a semaphore.
We use a Semaphore rather than an auto-reset event, because although
an auto-resent event might appear to solve the lost-wakeup bug (race
condition between releasing the outer lock and waiting) because it
maintains state even though a wait hasn't happened, there is still
a lost wakeup problem if more than one thread are interrupted in the
critical place. A semaphore solves that.
Because it is ok to signal a condition variable with no one
waiting, we need to keep track of the number of
waiting threads. Otherwise, the semaphore's state could rise
without bound.
Generic emulations of the pthread_cond_* API using
Win32 functions can be found on the Web.
The following read can be edificating (or not):
http://www.cse.wustl.edu/~schmidt/win32-cv-1.html
*/
typedef struct COND_T
{
HANDLE sem; /* the semaphore */
int n_waiting; /* how many are unreleased */
} COND_T;
__inline static void _cond_init(COND_T *cond)
{
/* A semaphore with a large max value, The positive value
* is only needed to catch those "lost wakeup" events and
* race conditions when a timed wait elapses.
*/
if (!(cond->sem = CreateSemaphore(NULL, 0, 1000, NULL)))
Py_FatalError("CreateSemaphore() failed");
cond->n_waiting = 0;
}
__inline static void _cond_fini(COND_T *cond)
{
BOOL ok = CloseHandle(cond->sem);
if (!ok)
Py_FatalError("CloseHandle() failed");
}
__inline static void _cond_wait(COND_T *cond, MUTEX_T *mut)
{
++cond->n_waiting;
MUTEX_UNLOCK(*mut);
/* "lost wakeup bug" would occur if the caller were interrupted here,
* but we are safe because we are using a semaphore wich has an internal
* count.
*/
if (WaitForSingleObject(cond->sem, INFINITE) == WAIT_FAILED)
Py_FatalError("WaitForSingleObject() failed");
MUTEX_LOCK(*mut);
}
__inline static int _cond_timed_wait(COND_T *cond, MUTEX_T *mut,
int us)
{
DWORD r;
++cond->n_waiting;
MUTEX_UNLOCK(*mut);
r = WaitForSingleObject(cond->sem, us / 1000);
if (r == WAIT_FAILED)
Py_FatalError("WaitForSingleObject() failed");
MUTEX_LOCK(*mut);
if (r == WAIT_TIMEOUT)
--cond->n_waiting;
/* Here we have a benign race condition with _cond_signal. If the
* wait operation has timed out, but before we can acquire the
* mutex again to decrement n_waiting, a thread holding the mutex
* still sees a positive n_waiting value and may call
* ReleaseSemaphore and decrement n_waiting.
* This will cause n_waiting to be decremented twice.
* This is benign, though, because ReleaseSemaphore will also have
* been called, leaving the semaphore state positive. We may
* thus end up with semaphore in state 1, and n_waiting == -1, and
* the next time someone calls _cond_wait(), that thread will
* pass right through, decrementing the semaphore state and
* incrementing n_waiting, thus correcting the extra _cond_signal.
*/
return r == WAIT_TIMEOUT;
}
__inline static void _cond_signal(COND_T *cond) {
/* NOTE: This must be called with the mutex held */
if (cond->n_waiting > 0) {
if (!ReleaseSemaphore(cond->sem, 1, NULL))
Py_FatalError("ReleaseSemaphore() failed");
--cond->n_waiting;
}
}
#define COND_INIT(cond) \
_cond_init(&(cond))
#define COND_FINI(cond) \
_cond_fini(&(cond))
#define COND_SIGNAL(cond) \
_cond_signal(&(cond))
#define COND_WAIT(cond, mut) \
_cond_wait(&(cond), &(mut))
#define COND_TIMED_WAIT(cond, mut, us, timeout_result) do { \
(timeout_result) = _cond_timed_wait(&(cond), &(mut), us); \
} while (0)
#else
#error You need either a POSIX-compatible or a Windows system!
#endif /* _POSIX_THREADS, NT_THREADS */
/* Whether the GIL is already taken (-1 if uninitialized). This is atomic
because it can be read without any lock taken in ceval.c. */
static _Py_atomic_int gil_locked = {-1};
/* Number of GIL switches since the beginning. */
static unsigned long gil_switch_number = 0;
/* Last PyThreadState holding / having held the GIL. This helps us know
whether anyone else was scheduled after we dropped the GIL. */
static _Py_atomic_address gil_last_holder = {NULL};
/* This condition variable allows one or several threads to wait until
the GIL is released. In addition, the mutex also protects the above
variables. */
static COND_T gil_cond;
static MUTEX_T gil_mutex;
#ifdef FORCE_SWITCHING
/* This condition variable helps the GIL-releasing thread wait for
a GIL-awaiting thread to be scheduled and take the GIL. */
static COND_T switch_cond;
static MUTEX_T switch_mutex;
#endif
static int gil_created(void)
{
return _Py_atomic_load_explicit(&gil_locked, _Py_memory_order_acquire) >= 0;
}
static void create_gil(void)
{
MUTEX_INIT(gil_mutex);
#ifdef FORCE_SWITCHING
MUTEX_INIT(switch_mutex);
#endif
COND_INIT(gil_cond);
#ifdef FORCE_SWITCHING
COND_INIT(switch_cond);
#endif
_Py_atomic_store_relaxed(&gil_last_holder, NULL);
_Py_ANNOTATE_RWLOCK_CREATE(&gil_locked);
_Py_atomic_store_explicit(&gil_locked, 0, _Py_memory_order_release);
}
static void recreate_gil(void)
{
_Py_ANNOTATE_RWLOCK_DESTROY(&gil_locked);
create_gil();
}
static void drop_gil(PyThreadState *tstate)
{
/* NOTE: tstate is allowed to be NULL. */
if (!_Py_atomic_load_relaxed(&gil_locked))
Py_FatalError("drop_gil: GIL is not locked");
if (tstate != NULL &&
tstate != _Py_atomic_load_relaxed(&gil_last_holder))
Py_FatalError("drop_gil: wrong thread state");
MUTEX_LOCK(gil_mutex);
_Py_ANNOTATE_RWLOCK_RELEASED(&gil_locked, /*is_write=*/1);
_Py_atomic_store_relaxed(&gil_locked, 0);
COND_SIGNAL(gil_cond);
MUTEX_UNLOCK(gil_mutex);
#ifdef FORCE_SWITCHING
if (_Py_atomic_load_relaxed(&gil_drop_request) && tstate != NULL) {
MUTEX_LOCK(switch_mutex);
/* Not switched yet => wait */
if (_Py_atomic_load_relaxed(&gil_last_holder) == tstate) {
RESET_GIL_DROP_REQUEST();
/* NOTE: if COND_WAIT does not atomically start waiting when
releasing the mutex, another thread can run through, take
the GIL and drop it again, and reset the condition
before we even had a chance to wait for it. */
COND_WAIT(switch_cond, switch_mutex);
}
MUTEX_UNLOCK(switch_mutex);
}
#endif
}
static void take_gil(PyThreadState *tstate)
{
int err;
if (tstate == NULL)
Py_FatalError("take_gil: NULL tstate");
err = errno;
MUTEX_LOCK(gil_mutex);
if (!_Py_atomic_load_relaxed(&gil_locked))
goto _ready;
while (_Py_atomic_load_relaxed(&gil_locked)) {
int timed_out = 0;
unsigned long saved_switchnum;
saved_switchnum = gil_switch_number;
COND_TIMED_WAIT(gil_cond, gil_mutex, INTERVAL, timed_out);
/* If we timed out and no switch occurred in the meantime, it is time
to ask the GIL-holding thread to drop it. */
if (timed_out &&
_Py_atomic_load_relaxed(&gil_locked) &&
gil_switch_number == saved_switchnum) {
SET_GIL_DROP_REQUEST();
}
}
_ready:
#ifdef FORCE_SWITCHING
/* This mutex must be taken before modifying gil_last_holder (see drop_gil()). */
MUTEX_LOCK(switch_mutex);
#endif
/* We now hold the GIL */
_Py_atomic_store_relaxed(&gil_locked, 1);
_Py_ANNOTATE_RWLOCK_ACQUIRED(&gil_locked, /*is_write=*/1);
if (tstate != _Py_atomic_load_relaxed(&gil_last_holder)) {
_Py_atomic_store_relaxed(&gil_last_holder, tstate);
++gil_switch_number;
}
#ifdef FORCE_SWITCHING
COND_SIGNAL(switch_cond);
MUTEX_UNLOCK(switch_mutex);
#endif
if (_Py_atomic_load_relaxed(&gil_drop_request)) {
RESET_GIL_DROP_REQUEST();
}
if (tstate->async_exc != NULL) {
_PyEval_SignalAsyncExc();
}
MUTEX_UNLOCK(gil_mutex);
errno = err;
}
void _PyEval_SetSwitchInterval(unsigned long microseconds)
{
gil_interval = microseconds;
}
unsigned long _PyEval_GetSwitchInterval()
{
return gil_interval;
}
Reference in New Issue View Git Blame Copy Permalink