536 lines
24 KiB
ReStructuredText
536 lines
24 KiB
ReStructuredText
.. highlightlang:: c
|
|
|
|
.. _arg-parsing:
|
|
|
|
Parsing arguments and building values
|
|
=====================================
|
|
|
|
These functions are useful when creating your own extensions functions and
|
|
methods. Additional information and examples are available in
|
|
:ref:`extending-index`.
|
|
|
|
The first three of these functions described, :cfunc:`PyArg_ParseTuple`,
|
|
:cfunc:`PyArg_ParseTupleAndKeywords`, and :cfunc:`PyArg_Parse`, all use *format
|
|
strings* which are used to tell the function about the expected arguments. The
|
|
format strings use the same syntax for each of these functions.
|
|
|
|
A format string consists of zero or more "format units." A format unit
|
|
describes one Python object; it is usually a single character or a parenthesized
|
|
sequence of format units. With a few exceptions, a format unit that is not a
|
|
parenthesized sequence normally corresponds to a single address argument to
|
|
these functions. In the following description, the quoted form is the format
|
|
unit; the entry in (round) parentheses is the Python object type that matches
|
|
the format unit; and the entry in [square] brackets is the type of the C
|
|
variable(s) whose address should be passed.
|
|
|
|
``s`` (string or Unicode object) [const char \*]
|
|
Convert a Python string or Unicode object to a C pointer to a character string.
|
|
You must not provide storage for the string itself; a pointer to an existing
|
|
string is stored into the character pointer variable whose address you pass.
|
|
The C string is NUL-terminated. The Python string must not contain embedded NUL
|
|
bytes; if it does, a :exc:`TypeError` exception is raised. Unicode objects are
|
|
converted to C strings using the default encoding. If this conversion fails, a
|
|
:exc:`UnicodeError` is raised.
|
|
|
|
``s#`` (string, Unicode or any read buffer compatible object) [const char \*, int (or :ctype:`Py_ssize_t`, see below)]
|
|
This variant on ``s`` stores into two C variables, the first one a pointer to a
|
|
character string, the second one its length. In this case the Python string may
|
|
contain embedded null bytes. Unicode objects pass back a pointer to the default
|
|
encoded string version of the object if such a conversion is possible. All
|
|
other read-buffer compatible objects pass back a reference to the raw internal
|
|
data representation.
|
|
|
|
Starting with Python 2.5 the type of the length argument can be
|
|
controlled by defining the macro :cmacro:`PY_SSIZE_T_CLEAN` before
|
|
including :file:`Python.h`. If the macro is defined, length is a
|
|
:ctype:`Py_ssize_t` rather than an int.
|
|
|
|
``s*`` (string, Unicode, or any buffer compatible object) [Py_buffer \*]
|
|
Similar to ``s#``, this code fills a Py_buffer structure provided by the caller.
|
|
The buffer gets locked, so that the caller can subsequently use the buffer even
|
|
inside a ``Py_BEGIN_ALLOW_THREADS`` block; the caller is responsible for calling
|
|
``PyBuffer_Release`` with the structure after it has processed the data.
|
|
|
|
.. versionadded:: 2.6
|
|
|
|
``z`` (string or ``None``) [const char \*]
|
|
Like ``s``, but the Python object may also be ``None``, in which case the C
|
|
pointer is set to *NULL*.
|
|
|
|
``z#`` (string or ``None`` or any read buffer compatible object) [const char \*, int]
|
|
This is to ``s#`` as ``z`` is to ``s``.
|
|
|
|
``z*`` (string or ``None`` or any buffer compatible object) [Py_buffer*]
|
|
This is to ``s*`` as ``z`` is to ``s``.
|
|
|
|
.. versionadded:: 2.6
|
|
|
|
``u`` (Unicode object) [Py_UNICODE \*]
|
|
Convert a Python Unicode object to a C pointer to a NUL-terminated buffer of
|
|
16-bit Unicode (UTF-16) data. As with ``s``, there is no need to provide
|
|
storage for the Unicode data buffer; a pointer to the existing Unicode data is
|
|
stored into the :ctype:`Py_UNICODE` pointer variable whose address you pass.
|
|
|
|
``u#`` (Unicode object) [Py_UNICODE \*, int]
|
|
This variant on ``u`` stores into two C variables, the first one a pointer to a
|
|
Unicode data buffer, the second one its length. Non-Unicode objects are handled
|
|
by interpreting their read-buffer pointer as pointer to a :ctype:`Py_UNICODE`
|
|
array.
|
|
|
|
``es`` (string, Unicode object or character buffer compatible object) [const char \*encoding, char \*\*buffer]
|
|
This variant on ``s`` is used for encoding Unicode and objects convertible to
|
|
Unicode into a character buffer. It only works for encoded data without embedded
|
|
NUL bytes.
|
|
|
|
This format requires two arguments. The first is only used as input, and
|
|
must be a :ctype:`const char\*` which points to the name of an encoding as a
|
|
NUL-terminated string, or *NULL*, in which case the default encoding is used.
|
|
An exception is raised if the named encoding is not known to Python. The
|
|
second argument must be a :ctype:`char\*\*`; the value of the pointer it
|
|
references will be set to a buffer with the contents of the argument text.
|
|
The text will be encoded in the encoding specified by the first argument.
|
|
|
|
:cfunc:`PyArg_ParseTuple` will allocate a buffer of the needed size, copy the
|
|
encoded data into this buffer and adjust *\*buffer* to reference the newly
|
|
allocated storage. The caller is responsible for calling :cfunc:`PyMem_Free` to
|
|
free the allocated buffer after use.
|
|
|
|
``et`` (string, Unicode object or character buffer compatible object) [const char \*encoding, char \*\*buffer]
|
|
Same as ``es`` except that 8-bit string objects are passed through without
|
|
recoding them. Instead, the implementation assumes that the string object uses
|
|
the encoding passed in as parameter.
|
|
|
|
``es#`` (string, Unicode object or character buffer compatible object) [const char \*encoding, char \*\*buffer, int \*buffer_length]
|
|
This variant on ``s#`` is used for encoding Unicode and objects convertible to
|
|
Unicode into a character buffer. Unlike the ``es`` format, this variant allows
|
|
input data which contains NUL characters.
|
|
|
|
It requires three arguments. The first is only used as input, and must be a
|
|
:ctype:`const char\*` which points to the name of an encoding as a
|
|
NUL-terminated string, or *NULL*, in which case the default encoding is used.
|
|
An exception is raised if the named encoding is not known to Python. The
|
|
second argument must be a :ctype:`char\*\*`; the value of the pointer it
|
|
references will be set to a buffer with the contents of the argument text.
|
|
The text will be encoded in the encoding specified by the first argument.
|
|
The third argument must be a pointer to an integer; the referenced integer
|
|
will be set to the number of bytes in the output buffer.
|
|
|
|
There are two modes of operation:
|
|
|
|
If *\*buffer* points a *NULL* pointer, the function will allocate a buffer of
|
|
the needed size, copy the encoded data into this buffer and set *\*buffer* to
|
|
reference the newly allocated storage. The caller is responsible for calling
|
|
:cfunc:`PyMem_Free` to free the allocated buffer after usage.
|
|
|
|
If *\*buffer* points to a non-*NULL* pointer (an already allocated buffer),
|
|
:cfunc:`PyArg_ParseTuple` will use this location as the buffer and interpret the
|
|
initial value of *\*buffer_length* as the buffer size. It will then copy the
|
|
encoded data into the buffer and NUL-terminate it. If the buffer is not large
|
|
enough, a :exc:`ValueError` will be set.
|
|
|
|
In both cases, *\*buffer_length* is set to the length of the encoded data
|
|
without the trailing NUL byte.
|
|
|
|
``et#`` (string, Unicode object or character buffer compatible object) [const char \*encoding, char \*\*buffer]
|
|
Same as ``es#`` except that string objects are passed through without recoding
|
|
them. Instead, the implementation assumes that the string object uses the
|
|
encoding passed in as parameter.
|
|
|
|
``b`` (integer) [char]
|
|
Convert a Python integer to a tiny int, stored in a C :ctype:`char`.
|
|
|
|
``B`` (integer) [unsigned char]
|
|
Convert a Python integer to a tiny int without overflow checking, stored in a C
|
|
:ctype:`unsigned char`.
|
|
|
|
.. versionadded:: 2.3
|
|
|
|
``h`` (integer) [short int]
|
|
Convert a Python integer to a C :ctype:`short int`.
|
|
|
|
``H`` (integer) [unsigned short int]
|
|
Convert a Python integer to a C :ctype:`unsigned short int`, without overflow
|
|
checking.
|
|
|
|
.. versionadded:: 2.3
|
|
|
|
``i`` (integer) [int]
|
|
Convert a Python integer to a plain C :ctype:`int`.
|
|
|
|
``I`` (integer) [unsigned int]
|
|
Convert a Python integer to a C :ctype:`unsigned int`, without overflow
|
|
checking.
|
|
|
|
.. versionadded:: 2.3
|
|
|
|
``l`` (integer) [long int]
|
|
Convert a Python integer to a C :ctype:`long int`.
|
|
|
|
``k`` (integer) [unsigned long]
|
|
Convert a Python integer or long integer to a C :ctype:`unsigned long` without
|
|
overflow checking.
|
|
|
|
.. versionadded:: 2.3
|
|
|
|
``L`` (integer) [PY_LONG_LONG]
|
|
Convert a Python integer to a C :ctype:`long long`. This format is only
|
|
available on platforms that support :ctype:`long long` (or :ctype:`_int64` on
|
|
Windows).
|
|
|
|
``K`` (integer) [unsigned PY_LONG_LONG]
|
|
Convert a Python integer or long integer to a C :ctype:`unsigned long long`
|
|
without overflow checking. This format is only available on platforms that
|
|
support :ctype:`unsigned long long` (or :ctype:`unsigned _int64` on Windows).
|
|
|
|
.. versionadded:: 2.3
|
|
|
|
``n`` (integer) [Py_ssize_t]
|
|
Convert a Python integer or long integer to a C :ctype:`Py_ssize_t`.
|
|
|
|
.. versionadded:: 2.5
|
|
|
|
``c`` (string of length 1) [char]
|
|
Convert a Python character, represented as a string of length 1, to a C
|
|
:ctype:`char`.
|
|
|
|
``f`` (float) [float]
|
|
Convert a Python floating point number to a C :ctype:`float`.
|
|
|
|
``d`` (float) [double]
|
|
Convert a Python floating point number to a C :ctype:`double`.
|
|
|
|
``D`` (complex) [Py_complex]
|
|
Convert a Python complex number to a C :ctype:`Py_complex` structure.
|
|
|
|
``O`` (object) [PyObject \*]
|
|
Store a Python object (without any conversion) in a C object pointer. The C
|
|
program thus receives the actual object that was passed. The object's reference
|
|
count is not increased. The pointer stored is not *NULL*.
|
|
|
|
``O!`` (object) [*typeobject*, PyObject \*]
|
|
Store a Python object in a C object pointer. This is similar to ``O``, but
|
|
takes two C arguments: the first is the address of a Python type object, the
|
|
second is the address of the C variable (of type :ctype:`PyObject\*`) into which
|
|
the object pointer is stored. If the Python object does not have the required
|
|
type, :exc:`TypeError` is raised.
|
|
|
|
``O&`` (object) [*converter*, *anything*]
|
|
Convert a Python object to a C variable through a *converter* function. This
|
|
takes two arguments: the first is a function, the second is the address of a C
|
|
variable (of arbitrary type), converted to :ctype:`void \*`. The *converter*
|
|
function in turn is called as follows::
|
|
|
|
status = converter(object, address);
|
|
|
|
where *object* is the Python object to be converted and *address* is the
|
|
:ctype:`void\*` argument that was passed to the :cfunc:`PyArg_Parse\*` function.
|
|
The returned *status* should be ``1`` for a successful conversion and ``0`` if
|
|
the conversion has failed. When the conversion fails, the *converter* function
|
|
should raise an exception and leave the content of *address* unmodified.
|
|
|
|
``S`` (string) [PyStringObject \*]
|
|
Like ``O`` but requires that the Python object is a string object. Raises
|
|
:exc:`TypeError` if the object is not a string object. The C variable may also
|
|
be declared as :ctype:`PyObject\*`.
|
|
|
|
``U`` (Unicode string) [PyUnicodeObject \*]
|
|
Like ``O`` but requires that the Python object is a Unicode object. Raises
|
|
:exc:`TypeError` if the object is not a Unicode object. The C variable may also
|
|
be declared as :ctype:`PyObject\*`.
|
|
|
|
``t#`` (read-only character buffer) [char \*, int]
|
|
Like ``s#``, but accepts any object which implements the read-only buffer
|
|
interface. The :ctype:`char\*` variable is set to point to the first byte of
|
|
the buffer, and the :ctype:`int` is set to the length of the buffer. Only
|
|
single-segment buffer objects are accepted; :exc:`TypeError` is raised for all
|
|
others.
|
|
|
|
``w`` (read-write character buffer) [char \*]
|
|
Similar to ``s``, but accepts any object which implements the read-write buffer
|
|
interface. The caller must determine the length of the buffer by other means,
|
|
or use ``w#`` instead. Only single-segment buffer objects are accepted;
|
|
:exc:`TypeError` is raised for all others.
|
|
|
|
``w#`` (read-write character buffer) [char \*, Py_ssize_t]
|
|
Like ``s#``, but accepts any object which implements the read-write buffer
|
|
interface. The :ctype:`char \*` variable is set to point to the first byte of
|
|
the buffer, and the :ctype:`int` is set to the length of the buffer. Only
|
|
single-segment buffer objects are accepted; :exc:`TypeError` is raised for all
|
|
others.
|
|
|
|
``w*`` (read-write byte-oriented buffer) [Py_buffer \*]
|
|
This is to ``w`` what ``s*`` is to ``s``.
|
|
.. versionadded:: 2.6
|
|
|
|
``(items)`` (tuple) [*matching-items*]
|
|
The object must be a Python sequence whose length is the number of format units
|
|
in *items*. The C arguments must correspond to the individual format units in
|
|
*items*. Format units for sequences may be nested.
|
|
|
|
.. note::
|
|
|
|
Prior to Python version 1.5.2, this format specifier only accepted a tuple
|
|
containing the individual parameters, not an arbitrary sequence. Code which
|
|
previously caused :exc:`TypeError` to be raised here may now proceed without an
|
|
exception. This is not expected to be a problem for existing code.
|
|
|
|
It is possible to pass Python long integers where integers are requested;
|
|
however no proper range checking is done --- the most significant bits are
|
|
silently truncated when the receiving field is too small to receive the value
|
|
(actually, the semantics are inherited from downcasts in C --- your mileage may
|
|
vary).
|
|
|
|
A few other characters have a meaning in a format string. These may not occur
|
|
inside nested parentheses. They are:
|
|
|
|
``|``
|
|
Indicates that the remaining arguments in the Python argument list are optional.
|
|
The C variables corresponding to optional arguments should be initialized to
|
|
their default value --- when an optional argument is not specified,
|
|
:cfunc:`PyArg_ParseTuple` does not touch the contents of the corresponding C
|
|
variable(s).
|
|
|
|
``:``
|
|
The list of format units ends here; the string after the colon is used as the
|
|
function name in error messages (the "associated value" of the exception that
|
|
:cfunc:`PyArg_ParseTuple` raises).
|
|
|
|
``;``
|
|
The list of format units ends here; the string after the semicolon is used as
|
|
the error message *instead* of the default error message. Clearly, ``:`` and
|
|
``;`` mutually exclude each other.
|
|
|
|
Note that any Python object references which are provided to the caller are
|
|
*borrowed* references; do not decrement their reference count!
|
|
|
|
Additional arguments passed to these functions must be addresses of variables
|
|
whose type is determined by the format string; these are used to store values
|
|
from the input tuple. There are a few cases, as described in the list of format
|
|
units above, where these parameters are used as input values; they should match
|
|
what is specified for the corresponding format unit in that case.
|
|
|
|
For the conversion to succeed, the *arg* object must match the format
|
|
and the format must be exhausted. On success, the
|
|
:cfunc:`PyArg_Parse\*` functions return true, otherwise they return
|
|
false and raise an appropriate exception. When the
|
|
:cfunc:`PyArg_Parse\*` functions fail due to conversion failure in one
|
|
of the format units, the variables at the addresses corresponding to that
|
|
and the following format units are left untouched.
|
|
|
|
|
|
.. cfunction:: int PyArg_ParseTuple(PyObject *args, const char *format, ...)
|
|
|
|
Parse the parameters of a function that takes only positional parameters into
|
|
local variables. Returns true on success; on failure, it returns false and
|
|
raises the appropriate exception.
|
|
|
|
|
|
.. cfunction:: int PyArg_VaParse(PyObject *args, const char *format, va_list vargs)
|
|
|
|
Identical to :cfunc:`PyArg_ParseTuple`, except that it accepts a va_list rather
|
|
than a variable number of arguments.
|
|
|
|
|
|
.. cfunction:: int PyArg_ParseTupleAndKeywords(PyObject *args, PyObject *kw, const char *format, char *keywords[], ...)
|
|
|
|
Parse the parameters of a function that takes both positional and keyword
|
|
parameters into local variables. Returns true on success; on failure, it
|
|
returns false and raises the appropriate exception.
|
|
|
|
|
|
.. cfunction:: int PyArg_VaParseTupleAndKeywords(PyObject *args, PyObject *kw, const char *format, char *keywords[], va_list vargs)
|
|
|
|
Identical to :cfunc:`PyArg_ParseTupleAndKeywords`, except that it accepts a
|
|
va_list rather than a variable number of arguments.
|
|
|
|
|
|
.. cfunction:: int PyArg_Parse(PyObject *args, const char *format, ...)
|
|
|
|
Function used to deconstruct the argument lists of "old-style" functions ---
|
|
these are functions which use the :const:`METH_OLDARGS` parameter parsing
|
|
method. This is not recommended for use in parameter parsing in new code, and
|
|
most code in the standard interpreter has been modified to no longer use this
|
|
for that purpose. It does remain a convenient way to decompose other tuples,
|
|
however, and may continue to be used for that purpose.
|
|
|
|
|
|
.. cfunction:: int PyArg_UnpackTuple(PyObject *args, const char *name, Py_ssize_t min, Py_ssize_t max, ...)
|
|
|
|
A simpler form of parameter retrieval which does not use a format string to
|
|
specify the types of the arguments. Functions which use this method to retrieve
|
|
their parameters should be declared as :const:`METH_VARARGS` in function or
|
|
method tables. The tuple containing the actual parameters should be passed as
|
|
*args*; it must actually be a tuple. The length of the tuple must be at least
|
|
*min* and no more than *max*; *min* and *max* may be equal. Additional
|
|
arguments must be passed to the function, each of which should be a pointer to a
|
|
:ctype:`PyObject\*` variable; these will be filled in with the values from
|
|
*args*; they will contain borrowed references. The variables which correspond
|
|
to optional parameters not given by *args* will not be filled in; these should
|
|
be initialized by the caller. This function returns true on success and false if
|
|
*args* is not a tuple or contains the wrong number of elements; an exception
|
|
will be set if there was a failure.
|
|
|
|
This is an example of the use of this function, taken from the sources for the
|
|
:mod:`_weakref` helper module for weak references::
|
|
|
|
static PyObject *
|
|
weakref_ref(PyObject *self, PyObject *args)
|
|
{
|
|
PyObject *object;
|
|
PyObject *callback = NULL;
|
|
PyObject *result = NULL;
|
|
|
|
if (PyArg_UnpackTuple(args, "ref", 1, 2, &object, &callback)) {
|
|
result = PyWeakref_NewRef(object, callback);
|
|
}
|
|
return result;
|
|
}
|
|
|
|
The call to :cfunc:`PyArg_UnpackTuple` in this example is entirely equivalent to
|
|
this call to :cfunc:`PyArg_ParseTuple`::
|
|
|
|
PyArg_ParseTuple(args, "O|O:ref", &object, &callback)
|
|
|
|
.. versionadded:: 2.2
|
|
|
|
|
|
.. cfunction:: PyObject* Py_BuildValue(const char *format, ...)
|
|
|
|
Create a new value based on a format string similar to those accepted by the
|
|
:cfunc:`PyArg_Parse\*` family of functions and a sequence of values. Returns
|
|
the value or *NULL* in the case of an error; an exception will be raised if
|
|
*NULL* is returned.
|
|
|
|
:cfunc:`Py_BuildValue` does not always build a tuple. It builds a tuple only if
|
|
its format string contains two or more format units. If the format string is
|
|
empty, it returns ``None``; if it contains exactly one format unit, it returns
|
|
whatever object is described by that format unit. To force it to return a tuple
|
|
of size 0 or one, parenthesize the format string.
|
|
|
|
When memory buffers are passed as parameters to supply data to build objects, as
|
|
for the ``s`` and ``s#`` formats, the required data is copied. Buffers provided
|
|
by the caller are never referenced by the objects created by
|
|
:cfunc:`Py_BuildValue`. In other words, if your code invokes :cfunc:`malloc`
|
|
and passes the allocated memory to :cfunc:`Py_BuildValue`, your code is
|
|
responsible for calling :cfunc:`free` for that memory once
|
|
:cfunc:`Py_BuildValue` returns.
|
|
|
|
In the following description, the quoted form is the format unit; the entry in
|
|
(round) parentheses is the Python object type that the format unit will return;
|
|
and the entry in [square] brackets is the type of the C value(s) to be passed.
|
|
|
|
The characters space, tab, colon and comma are ignored in format strings (but
|
|
not within format units such as ``s#``). This can be used to make long format
|
|
strings a tad more readable.
|
|
|
|
``s`` (string) [char \*]
|
|
Convert a null-terminated C string to a Python object. If the C string pointer
|
|
is *NULL*, ``None`` is used.
|
|
|
|
``s#`` (string) [char \*, int]
|
|
Convert a C string and its length to a Python object. If the C string pointer
|
|
is *NULL*, the length is ignored and ``None`` is returned.
|
|
|
|
``z`` (string or ``None``) [char \*]
|
|
Same as ``s``.
|
|
|
|
``z#`` (string or ``None``) [char \*, int]
|
|
Same as ``s#``.
|
|
|
|
``u`` (Unicode string) [Py_UNICODE \*]
|
|
Convert a null-terminated buffer of Unicode (UCS-2 or UCS-4) data to a Python
|
|
Unicode object. If the Unicode buffer pointer is *NULL*, ``None`` is returned.
|
|
|
|
``u#`` (Unicode string) [Py_UNICODE \*, int]
|
|
Convert a Unicode (UCS-2 or UCS-4) data buffer and its length to a Python
|
|
Unicode object. If the Unicode buffer pointer is *NULL*, the length is ignored
|
|
and ``None`` is returned.
|
|
|
|
``i`` (integer) [int]
|
|
Convert a plain C :ctype:`int` to a Python integer object.
|
|
|
|
``b`` (integer) [char]
|
|
Convert a plain C :ctype:`char` to a Python integer object.
|
|
|
|
``h`` (integer) [short int]
|
|
Convert a plain C :ctype:`short int` to a Python integer object.
|
|
|
|
``l`` (integer) [long int]
|
|
Convert a C :ctype:`long int` to a Python integer object.
|
|
|
|
``B`` (integer) [unsigned char]
|
|
Convert a C :ctype:`unsigned char` to a Python integer object.
|
|
|
|
``H`` (integer) [unsigned short int]
|
|
Convert a C :ctype:`unsigned short int` to a Python integer object.
|
|
|
|
``I`` (integer/long) [unsigned int]
|
|
Convert a C :ctype:`unsigned int` to a Python integer object or a Python long
|
|
integer object, if it is larger than ``sys.maxint``.
|
|
|
|
``k`` (integer/long) [unsigned long]
|
|
Convert a C :ctype:`unsigned long` to a Python integer object or a Python long
|
|
integer object, if it is larger than ``sys.maxint``.
|
|
|
|
``L`` (long) [PY_LONG_LONG]
|
|
Convert a C :ctype:`long long` to a Python long integer object. Only available
|
|
on platforms that support :ctype:`long long`.
|
|
|
|
``K`` (long) [unsigned PY_LONG_LONG]
|
|
Convert a C :ctype:`unsigned long long` to a Python long integer object. Only
|
|
available on platforms that support :ctype:`unsigned long long`.
|
|
|
|
``n`` (int) [Py_ssize_t]
|
|
Convert a C :ctype:`Py_ssize_t` to a Python integer or long integer.
|
|
|
|
.. versionadded:: 2.5
|
|
|
|
``c`` (string of length 1) [char]
|
|
Convert a C :ctype:`int` representing a character to a Python string of length
|
|
1.
|
|
|
|
``d`` (float) [double]
|
|
Convert a C :ctype:`double` to a Python floating point number.
|
|
|
|
``f`` (float) [float]
|
|
Same as ``d``.
|
|
|
|
``D`` (complex) [Py_complex \*]
|
|
Convert a C :ctype:`Py_complex` structure to a Python complex number.
|
|
|
|
``O`` (object) [PyObject \*]
|
|
Pass a Python object untouched (except for its reference count, which is
|
|
incremented by one). If the object passed in is a *NULL* pointer, it is assumed
|
|
that this was caused because the call producing the argument found an error and
|
|
set an exception. Therefore, :cfunc:`Py_BuildValue` will return *NULL* but won't
|
|
raise an exception. If no exception has been raised yet, :exc:`SystemError` is
|
|
set.
|
|
|
|
``S`` (object) [PyObject \*]
|
|
Same as ``O``.
|
|
|
|
``N`` (object) [PyObject \*]
|
|
Same as ``O``, except it doesn't increment the reference count on the object.
|
|
Useful when the object is created by a call to an object constructor in the
|
|
argument list.
|
|
|
|
``O&`` (object) [*converter*, *anything*]
|
|
Convert *anything* to a Python object through a *converter* function. The
|
|
function is called with *anything* (which should be compatible with :ctype:`void
|
|
\*`) as its argument and should return a "new" Python object, or *NULL* if an
|
|
error occurred.
|
|
|
|
``(items)`` (tuple) [*matching-items*]
|
|
Convert a sequence of C values to a Python tuple with the same number of items.
|
|
|
|
``[items]`` (list) [*matching-items*]
|
|
Convert a sequence of C values to a Python list with the same number of items.
|
|
|
|
``{items}`` (dictionary) [*matching-items*]
|
|
Convert a sequence of C values to a Python dictionary. Each pair of consecutive
|
|
C values adds one item to the dictionary, serving as key and value,
|
|
respectively.
|
|
|
|
If there is an error in the format string, the :exc:`SystemError` exception is
|
|
set and *NULL* returned.
|