traverseda
/
cpython
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
cpython/Python/thread_pthread.h

871 lines
24 KiB
C
Raw Blame History

/* Posix threads interface */
#include <stdlib.h>
#include <string.h>
#if defined(__APPLE__) || defined(HAVE_PTHREAD_DESTRUCTOR)
#define destructor xxdestructor
#endif
#include <pthread.h>
#if defined(__APPLE__) || defined(HAVE_PTHREAD_DESTRUCTOR)
#undef destructor
#endif
#include <signal.h>
#if defined(__linux__)
# include <sys/syscall.h> /* syscall(SYS_gettid) */
#elif defined(__FreeBSD__)
# include <pthread_np.h> /* pthread_getthreadid_np() */
#elif defined(__OpenBSD__)
# include <unistd.h> /* getthrid() */
#elif defined(_AIX)
# include <sys/thread.h> /* thread_self() */
#elif defined(__NetBSD__)
# include <lwp.h> /* _lwp_self() */
#endif
/* The POSIX spec requires that use of pthread_attr_setstacksize
be conditional on _POSIX_THREAD_ATTR_STACKSIZE being defined. */
#ifdef _POSIX_THREAD_ATTR_STACKSIZE
#ifndef THREAD_STACK_SIZE
#define THREAD_STACK_SIZE 0 /* use default stack size */
#endif
/* The default stack size for new threads on OSX and BSD is small enough that
* we'll get hard crashes instead of 'maximum recursion depth exceeded'
* exceptions.
*
* The default stack sizes below are the empirically determined minimal stack
* sizes where a simple recursive function doesn't cause a hard crash.
*/
#if defined(__APPLE__) && defined(THREAD_STACK_SIZE) && THREAD_STACK_SIZE == 0
#undef THREAD_STACK_SIZE
/* Note: This matches the value of -Wl,-stack_size in configure.ac */
#define THREAD_STACK_SIZE 0x1000000
#endif
#if defined(__FreeBSD__) && defined(THREAD_STACK_SIZE) && THREAD_STACK_SIZE == 0
#undef THREAD_STACK_SIZE
#define THREAD_STACK_SIZE 0x400000
#endif
/* for safety, ensure a viable minimum stacksize */
#define THREAD_STACK_MIN 0x8000 /* 32 KiB */
#else /* !_POSIX_THREAD_ATTR_STACKSIZE */
#ifdef THREAD_STACK_SIZE
#error "THREAD_STACK_SIZE defined but _POSIX_THREAD_ATTR_STACKSIZE undefined"
#endif
#endif
/* The POSIX spec says that implementations supporting the sem_*
family of functions must indicate this by defining
_POSIX_SEMAPHORES. */
#ifdef _POSIX_SEMAPHORES
/* On FreeBSD 4.x, _POSIX_SEMAPHORES is defined empty, so
we need to add 0 to make it work there as well. */
#if (_POSIX_SEMAPHORES+0) == -1
#define HAVE_BROKEN_POSIX_SEMAPHORES
#else
#include <semaphore.h>
#include <errno.h>
#endif
#endif
/* Whether or not to use semaphores directly rather than emulating them with
* mutexes and condition variables:
*/
#if (defined(_POSIX_SEMAPHORES) && !defined(HAVE_BROKEN_POSIX_SEMAPHORES) && \
defined(HAVE_SEM_TIMEDWAIT))
# define USE_SEMAPHORES
#else
# undef USE_SEMAPHORES
#endif
/* On platforms that don't use standard POSIX threads pthread_sigmask()
* isn't present. DEC threads uses sigprocmask() instead as do most
* other UNIX International compliant systems that don't have the full
* pthread implementation.
*/
#if defined(HAVE_PTHREAD_SIGMASK) && !defined(HAVE_BROKEN_PTHREAD_SIGMASK)
# define SET_THREAD_SIGMASK pthread_sigmask
#else
# define SET_THREAD_SIGMASK sigprocmask
#endif
/* We assume all modern POSIX systems have gettimeofday() */
#ifdef GETTIMEOFDAY_NO_TZ
#define GETTIMEOFDAY(ptv) gettimeofday(ptv)
#else
#define GETTIMEOFDAY(ptv) gettimeofday(ptv, (struct timezone *)NULL)
#endif
#define MICROSECONDS_TO_TIMESPEC(microseconds, ts) \
do { \
struct timeval tv; \
GETTIMEOFDAY(&tv); \
tv.tv_usec += microseconds % 1000000; \
tv.tv_sec += microseconds / 1000000; \
tv.tv_sec += tv.tv_usec / 1000000; \
tv.tv_usec %= 1000000; \
ts.tv_sec = tv.tv_sec; \
ts.tv_nsec = tv.tv_usec * 1000; \
} while(0)
/*
* pthread_cond support
*/
#if defined(HAVE_PTHREAD_CONDATTR_SETCLOCK) && defined(HAVE_CLOCK_GETTIME) && defined(CLOCK_MONOTONIC)
// monotonic is supported statically. It doesn't mean it works on runtime.
#define CONDATTR_MONOTONIC
#endif
// NULL when pthread_condattr_setclock(CLOCK_MONOTONIC) is not supported.
static pthread_condattr_t *condattr_monotonic = NULL;
static void
init_condattr()
{
#ifdef CONDATTR_MONOTONIC
static pthread_condattr_t ca;
pthread_condattr_init(&ca);
if (pthread_condattr_setclock(&ca, CLOCK_MONOTONIC) == 0) {
condattr_monotonic = &ca; // Use monotonic clock
}
#endif
}
int
_PyThread_cond_init(PyCOND_T *cond)
{
return pthread_cond_init(cond, condattr_monotonic);
}
void
_PyThread_cond_after(long long us, struct timespec *abs)
{
#ifdef CONDATTR_MONOTONIC
if (condattr_monotonic) {
clock_gettime(CLOCK_MONOTONIC, abs);
abs->tv_sec += us / 1000000;
abs->tv_nsec += (us % 1000000) * 1000;
abs->tv_sec += abs->tv_nsec / 1000000000;
abs->tv_nsec %= 1000000000;
return;
}
#endif
struct timespec ts;
MICROSECONDS_TO_TIMESPEC(us, ts);
*abs = ts;
}
/* A pthread mutex isn't sufficient to model the Python lock type
* because, according to Draft 5 of the docs (P1003.4a/D5), both of the
* following are undefined:
* -> a thread tries to lock a mutex it already has locked
* -> a thread tries to unlock a mutex locked by a different thread
* pthread mutexes are designed for serializing threads over short pieces
* of code anyway, so wouldn't be an appropriate implementation of
* Python's locks regardless.
*
* The pthread_lock struct implements a Python lock as a "locked?" bit
* and a <condition, mutex> pair. In general, if the bit can be acquired
* instantly, it is, else the pair is used to block the thread until the
* bit is cleared. 9 May 1994 tim@ksr.com
*/
typedef struct {
char locked; /* 0=unlocked, 1=locked */
/* a <cond, mutex> pair to handle an acquire of a locked lock */
pthread_cond_t lock_released;
pthread_mutex_t mut;
} pthread_lock;
#define CHECK_STATUS(name) if (status != 0) { perror(name); error = 1; }
#define CHECK_STATUS_PTHREAD(name) if (status != 0) { fprintf(stderr, \
"%s: %s\n", name, strerror(status)); error = 1; }
/*
* Initialization.
*/
static void
PyThread__init_thread(void)
{
#if defined(_AIX) && defined(__GNUC__)
extern void pthread_init(void);
pthread_init();
#endif
init_condattr();
}
/*
* Thread support.
*/
/* bpo-33015: pythread_callback struct and pythread_wrapper() cast
"void func(void *)" to "void* func(void *)": always return NULL.
PyThread_start_new_thread() uses "void func(void *)" type, whereas
pthread_create() requires a void* return value. */
typedef struct {
void (*func) (void *);
void *arg;
} pythread_callback;
static void *
pythread_wrapper(void *arg)
{
/* copy func and func_arg and free the temporary structure */
pythread_callback *callback = arg;
void (*func)(void *) = callback->func;
void *func_arg = callback->arg;
PyMem_RawFree(arg);
func(func_arg);
return NULL;
}
unsigned long
PyThread_start_new_thread(void (*func)(void *), void *arg)
{
pthread_t th;
int status;
#if defined(THREAD_STACK_SIZE) || defined(PTHREAD_SYSTEM_SCHED_SUPPORTED)
pthread_attr_t attrs;
#endif
#if defined(THREAD_STACK_SIZE)
size_t tss;
#endif
dprintf(("PyThread_start_new_thread called\n"));
if (!initialized)
PyThread_init_thread();
#if defined(THREAD_STACK_SIZE) || defined(PTHREAD_SYSTEM_SCHED_SUPPORTED)
if (pthread_attr_init(&attrs) != 0)
return PYTHREAD_INVALID_THREAD_ID;
#endif
#if defined(THREAD_STACK_SIZE)
PyThreadState *tstate = _PyThreadState_GET();
size_t stacksize = tstate ? tstate->interp->pythread_stacksize : 0;
tss = (stacksize != 0) ? stacksize : THREAD_STACK_SIZE;
if (tss != 0) {
if (pthread_attr_setstacksize(&attrs, tss) != 0) {
pthread_attr_destroy(&attrs);
return PYTHREAD_INVALID_THREAD_ID;
}
}
#endif
#if defined(PTHREAD_SYSTEM_SCHED_SUPPORTED)
pthread_attr_setscope(&attrs, PTHREAD_SCOPE_SYSTEM);
#endif
pythread_callback *callback = PyMem_RawMalloc(sizeof(pythread_callback));
if (callback == NULL) {
return PYTHREAD_INVALID_THREAD_ID;
}
callback->func = func;
callback->arg = arg;
status = pthread_create(&th,
#if defined(THREAD_STACK_SIZE) || defined(PTHREAD_SYSTEM_SCHED_SUPPORTED)
&attrs,
#else
(pthread_attr_t*)NULL,
#endif
pythread_wrapper, callback);
#if defined(THREAD_STACK_SIZE) || defined(PTHREAD_SYSTEM_SCHED_SUPPORTED)
pthread_attr_destroy(&attrs);
#endif
if (status != 0) {
PyMem_RawFree(callback);
return PYTHREAD_INVALID_THREAD_ID;
}
pthread_detach(th);
#if SIZEOF_PTHREAD_T <= SIZEOF_LONG
return (unsigned long) th;
#else
return (unsigned long) *(unsigned long *) &th;
#endif
}
/* XXX This implementation is considered (to quote Tim Peters) "inherently
hosed" because:
- It does not guarantee the promise that a non-zero integer is returned.
- The cast to unsigned long is inherently unsafe.
- It is not clear that the 'volatile' (for AIX?) are any longer necessary.
*/
unsigned long
PyThread_get_thread_ident(void)
{
volatile pthread_t threadid;
if (!initialized)
PyThread_init_thread();
threadid = pthread_self();
return (unsigned long) threadid;
}
#ifdef PY_HAVE_THREAD_NATIVE_ID
unsigned long
PyThread_get_thread_native_id(void)
{
if (!initialized)
PyThread_init_thread();
#ifdef __APPLE__
uint64_t native_id;
(void) pthread_threadid_np(NULL, &native_id);
#elif defined(__linux__)
pid_t native_id;
native_id = syscall(SYS_gettid);
#elif defined(__FreeBSD__)
int native_id;
native_id = pthread_getthreadid_np();
#elif defined(__OpenBSD__)
pid_t native_id;
native_id = getthrid();
#elif defined(_AIX)
tid_t native_id;
native_id = thread_self();
#elif defined(__NetBSD__)
lwpid_t native_id;
native_id = _lwp_self();
#endif
return (unsigned long) native_id;
}
#endif
void _Py_NO_RETURN
PyThread_exit_thread(void)
{
dprintf(("PyThread_exit_thread called\n"));
if (!initialized)
exit(0);
pthread_exit(0);
}
#ifdef USE_SEMAPHORES
/*
* Lock support.
*/
PyThread_type_lock
PyThread_allocate_lock(void)
{
sem_t *lock;
int status, error = 0;
dprintf(("PyThread_allocate_lock called\n"));
if (!initialized)
PyThread_init_thread();
lock = (sem_t *)PyMem_RawMalloc(sizeof(sem_t));
if (lock) {
status = sem_init(lock,0,1);
CHECK_STATUS("sem_init");
if (error) {
PyMem_RawFree((void *)lock);
lock = NULL;
}
}
dprintf(("PyThread_allocate_lock() -> %p\n", (void *)lock));
return (PyThread_type_lock)lock;
}
void
PyThread_free_lock(PyThread_type_lock lock)
{
sem_t *thelock = (sem_t *)lock;
int status, error = 0;
(void) error; /* silence unused-but-set-variable warning */
dprintf(("PyThread_free_lock(%p) called\n", lock));
if (!thelock)
return;
status = sem_destroy(thelock);
CHECK_STATUS("sem_destroy");
PyMem_RawFree((void *)thelock);
}
/*
* As of February 2002, Cygwin thread implementations mistakenly report error
* codes in the return value of the sem_ calls (like the pthread_ functions).
* Correct implementations return -1 and put the code in errno. This supports
* either.
*/
static int
fix_status(int status)
{
return (status == -1) ? errno : status;
}
PyLockStatus
PyThread_acquire_lock_timed(PyThread_type_lock lock, PY_TIMEOUT_T microseconds,
int intr_flag)
{
PyLockStatus success;
sem_t *thelock = (sem_t *)lock;
int status, error = 0;
struct timespec ts;
_PyTime_t deadline = 0;
(void) error; /* silence unused-but-set-variable warning */
dprintf(("PyThread_acquire_lock_timed(%p, %lld, %d) called\n",
lock, microseconds, intr_flag));
if (microseconds > PY_TIMEOUT_MAX) {
Py_FatalError("Timeout larger than PY_TIMEOUT_MAX");
}
if (microseconds > 0) {
MICROSECONDS_TO_TIMESPEC(microseconds, ts);
if (!intr_flag) {
/* cannot overflow thanks to (microseconds > PY_TIMEOUT_MAX)
check done above */
_PyTime_t timeout = _PyTime_FromNanoseconds(microseconds * 1000);
deadline = _PyTime_GetMonotonicClock() + timeout;
}
}
while (1) {
if (microseconds > 0) {
status = fix_status(sem_timedwait(thelock, &ts));
}
else if (microseconds == 0) {
status = fix_status(sem_trywait(thelock));
}
else {
status = fix_status(sem_wait(thelock));
}
/* Retry if interrupted by a signal, unless the caller wants to be
notified. */
if (intr_flag || status != EINTR) {
break;
}
if (microseconds > 0) {
/* wait interrupted by a signal (EINTR): recompute the timeout */
_PyTime_t dt = deadline - _PyTime_GetMonotonicClock();
if (dt < 0) {
status = ETIMEDOUT;
break;
}
else if (dt > 0) {
_PyTime_t realtime_deadline = _PyTime_GetSystemClock() + dt;
if (_PyTime_AsTimespec(realtime_deadline, &ts) < 0) {
/* Cannot occur thanks to (microseconds > PY_TIMEOUT_MAX)
check done above */
Py_UNREACHABLE();
}
/* no need to update microseconds value, the code only care
if (microseconds > 0 or (microseconds == 0). */
}
else {
microseconds = 0;
}
}
}
/* Don't check the status if we're stopping because of an interrupt. */
if (!(intr_flag && status == EINTR)) {
if (microseconds > 0) {
if (status != ETIMEDOUT)
CHECK_STATUS("sem_timedwait");
}
else if (microseconds == 0) {
if (status != EAGAIN)
CHECK_STATUS("sem_trywait");
}
else {
CHECK_STATUS("sem_wait");
}
}
if (status == 0) {
success = PY_LOCK_ACQUIRED;
} else if (intr_flag && status == EINTR) {
success = PY_LOCK_INTR;
} else {
success = PY_LOCK_FAILURE;
}
dprintf(("PyThread_acquire_lock_timed(%p, %lld, %d) -> %d\n",
lock, microseconds, intr_flag, success));
return success;
}
void
PyThread_release_lock(PyThread_type_lock lock)
{
sem_t *thelock = (sem_t *)lock;
int status, error = 0;
(void) error; /* silence unused-but-set-variable warning */
dprintf(("PyThread_release_lock(%p) called\n", lock));
status = sem_post(thelock);
CHECK_STATUS("sem_post");
}
#else /* USE_SEMAPHORES */
/*
* Lock support.
*/
PyThread_type_lock
PyThread_allocate_lock(void)
{
pthread_lock *lock;
int status, error = 0;
dprintf(("PyThread_allocate_lock called\n"));
if (!initialized)
PyThread_init_thread();
lock = (pthread_lock *) PyMem_RawMalloc(sizeof(pthread_lock));
if (lock) {
memset((void *)lock, '\0', sizeof(pthread_lock));
lock->locked = 0;
status = pthread_mutex_init(&lock->mut, NULL);
CHECK_STATUS_PTHREAD("pthread_mutex_init");
/* Mark the pthread mutex underlying a Python mutex as
pure happens-before. We can't simply mark the
Python-level mutex as a mutex because it can be
acquired and released in different threads, which
will cause errors. */
_Py_ANNOTATE_PURE_HAPPENS_BEFORE_MUTEX(&lock->mut);
status = _PyThread_cond_init(&lock->lock_released);
CHECK_STATUS_PTHREAD("pthread_cond_init");
if (error) {
PyMem_RawFree((void *)lock);
lock = 0;
}
}
dprintf(("PyThread_allocate_lock() -> %p\n", (void *)lock));
return (PyThread_type_lock) lock;
}
void
PyThread_free_lock(PyThread_type_lock lock)
{
pthread_lock *thelock = (pthread_lock *)lock;
int status, error = 0;
(void) error; /* silence unused-but-set-variable warning */
dprintf(("PyThread_free_lock(%p) called\n", lock));
/* some pthread-like implementations tie the mutex to the cond
* and must have the cond destroyed first.
*/
status = pthread_cond_destroy( &thelock->lock_released );
CHECK_STATUS_PTHREAD("pthread_cond_destroy");
status = pthread_mutex_destroy( &thelock->mut );
CHECK_STATUS_PTHREAD("pthread_mutex_destroy");
PyMem_RawFree((void *)thelock);
}
PyLockStatus
PyThread_acquire_lock_timed(PyThread_type_lock lock, PY_TIMEOUT_T microseconds,
int intr_flag)
{
PyLockStatus success = PY_LOCK_FAILURE;
pthread_lock *thelock = (pthread_lock *)lock;
int status, error = 0;
dprintf(("PyThread_acquire_lock_timed(%p, %lld, %d) called\n",
lock, microseconds, intr_flag));
if (microseconds == 0) {
status = pthread_mutex_trylock( &thelock->mut );
if (status != EBUSY)
CHECK_STATUS_PTHREAD("pthread_mutex_trylock[1]");
}
else {
status = pthread_mutex_lock( &thelock->mut );
CHECK_STATUS_PTHREAD("pthread_mutex_lock[1]");
}
if (status == 0) {
if (thelock->locked == 0) {
success = PY_LOCK_ACQUIRED;
}
else if (microseconds != 0) {
struct timespec abs;
if (microseconds > 0) {
_PyThread_cond_after(microseconds, &abs);
}
/* continue trying until we get the lock */
/* mut must be locked by me -- part of the condition
* protocol */
while (success == PY_LOCK_FAILURE) {
if (microseconds > 0) {
status = pthread_cond_timedwait(
&thelock->lock_released,
&thelock->mut, &abs);
if (status == 1) {
break;
}
if (status == ETIMEDOUT)
break;
CHECK_STATUS_PTHREAD("pthread_cond_timedwait");
}
else {
status = pthread_cond_wait(
&thelock->lock_released,
&thelock->mut);
CHECK_STATUS_PTHREAD("pthread_cond_wait");
}
if (intr_flag && status == 0 && thelock->locked) {
/* We were woken up, but didn't get the lock. We probably received
* a signal. Return PY_LOCK_INTR to allow the caller to handle
* it and retry. */
success = PY_LOCK_INTR;
break;
}
else if (status == 0 && !thelock->locked) {
success = PY_LOCK_ACQUIRED;
}
}
}
if (success == PY_LOCK_ACQUIRED) thelock->locked = 1;
status = pthread_mutex_unlock( &thelock->mut );
CHECK_STATUS_PTHREAD("pthread_mutex_unlock[1]");
}
if (error) success = PY_LOCK_FAILURE;
dprintf(("PyThread_acquire_lock_timed(%p, %lld, %d) -> %d\n",
lock, microseconds, intr_flag, success));
return success;
}
void
PyThread_release_lock(PyThread_type_lock lock)
{
pthread_lock *thelock = (pthread_lock *)lock;
int status, error = 0;
(void) error; /* silence unused-but-set-variable warning */
dprintf(("PyThread_release_lock(%p) called\n", lock));
status = pthread_mutex_lock( &thelock->mut );
CHECK_STATUS_PTHREAD("pthread_mutex_lock[3]");
thelock->locked = 0;
/* wake up someone (anyone, if any) waiting on the lock */
status = pthread_cond_signal( &thelock->lock_released );
CHECK_STATUS_PTHREAD("pthread_cond_signal");
status = pthread_mutex_unlock( &thelock->mut );
CHECK_STATUS_PTHREAD("pthread_mutex_unlock[3]");
}
#endif /* USE_SEMAPHORES */
int
PyThread_acquire_lock(PyThread_type_lock lock, int waitflag)
{
return PyThread_acquire_lock_timed(lock, waitflag ? -1 : 0, /*intr_flag=*/0);
}
/* set the thread stack size.
* Return 0 if size is valid, -1 if size is invalid,
* -2 if setting stack size is not supported.
*/
static int
_pythread_pthread_set_stacksize(size_t size)
{
#if defined(THREAD_STACK_SIZE)
pthread_attr_t attrs;
size_t tss_min;
int rc = 0;
#endif
/* set to default */
if (size == 0) {
_PyInterpreterState_GET_UNSAFE()->pythread_stacksize = 0;
return 0;
}
#if defined(THREAD_STACK_SIZE)
#if defined(PTHREAD_STACK_MIN)
tss_min = PTHREAD_STACK_MIN > THREAD_STACK_MIN ? PTHREAD_STACK_MIN
: THREAD_STACK_MIN;
#else
tss_min = THREAD_STACK_MIN;
#endif
if (size >= tss_min) {
/* validate stack size by setting thread attribute */
if (pthread_attr_init(&attrs) == 0) {
rc = pthread_attr_setstacksize(&attrs, size);
pthread_attr_destroy(&attrs);
if (rc == 0) {
_PyInterpreterState_GET_UNSAFE()->pythread_stacksize = size;
return 0;
}
}
}
return -1;
#else
return -2;
#endif
}
#define THREAD_SET_STACKSIZE(x) _pythread_pthread_set_stacksize(x)
/* Thread Local Storage (TLS) API
This API is DEPRECATED since Python 3.7. See PEP 539 for details.
*/
/* Issue #25658: On platforms where native TLS key is defined in a way that
cannot be safely cast to int, PyThread_create_key returns immediately a
failure status and other TLS functions all are no-ops. This indicates
clearly that the old API is not supported on platforms where it cannot be
used reliably, and that no effort will be made to add such support.
Note: PTHREAD_KEY_T_IS_COMPATIBLE_WITH_INT will be unnecessary after
removing this API.
*/
int
PyThread_create_key(void)
{
#ifdef PTHREAD_KEY_T_IS_COMPATIBLE_WITH_INT
pthread_key_t key;
int fail = pthread_key_create(&key, NULL);
if (fail)
return -1;
if (key > INT_MAX) {
/* Issue #22206: handle integer overflow */
pthread_key_delete(key);
errno = ENOMEM;
return -1;
}
return (int)key;
#else
return -1; /* never return valid key value. */
#endif
}
void
PyThread_delete_key(int key)
{
#ifdef PTHREAD_KEY_T_IS_COMPATIBLE_WITH_INT
pthread_key_delete(key);
#endif
}
void
PyThread_delete_key_value(int key)
{
#ifdef PTHREAD_KEY_T_IS_COMPATIBLE_WITH_INT
pthread_setspecific(key, NULL);
#endif
}
int
PyThread_set_key_value(int key, void *value)
{
#ifdef PTHREAD_KEY_T_IS_COMPATIBLE_WITH_INT
int fail = pthread_setspecific(key, value);
return fail ? -1 : 0;
#else
return -1;
#endif
}
void *
PyThread_get_key_value(int key)
{
#ifdef PTHREAD_KEY_T_IS_COMPATIBLE_WITH_INT
return pthread_getspecific(key);
#else
return NULL;
#endif
}
void
PyThread_ReInitTLS(void)
{
}
/* Thread Specific Storage (TSS) API
Platform-specific components of TSS API implementation.
*/
int
PyThread_tss_create(Py_tss_t *key)
{
assert(key != NULL);
/* If the key has been created, function is silently skipped. */
if (key->_is_initialized) {
return 0;
}
int fail = pthread_key_create(&(key->_key), NULL);
if (fail) {
return -1;
}
key->_is_initialized = 1;
return 0;
}
void
PyThread_tss_delete(Py_tss_t *key)
{
assert(key != NULL);
/* If the key has not been created, function is silently skipped. */
if (!key->_is_initialized) {
return;
}
pthread_key_delete(key->_key);
/* pthread has not provided the defined invalid value for the key. */
key->_is_initialized = 0;
}
int
PyThread_tss_set(Py_tss_t *key, void *value)
{
assert(key != NULL);
int fail = pthread_setspecific(key->_key, value);
return fail ? -1 : 0;
}
void *
PyThread_tss_get(Py_tss_t *key)
{
assert(key != NULL);
return pthread_getspecific(key->_key);
}
Reference in New Issue View Git Blame Copy Permalink