668 lines
29 KiB
ReStructuredText
668 lines
29 KiB
ReStructuredText
.. _unicode-howto:
|
|
|
|
*****************
|
|
Unicode HOWTO
|
|
*****************
|
|
|
|
:Release: 1.11
|
|
|
|
This HOWTO discusses Python 2.x's support for Unicode, and explains
|
|
various problems that people commonly encounter when trying to work
|
|
with Unicode. (This HOWTO has not yet been updated to cover the 3.x
|
|
versions of Python.)
|
|
|
|
|
|
Introduction to Unicode
|
|
=======================
|
|
|
|
History of Character Codes
|
|
--------------------------
|
|
|
|
In 1968, the American Standard Code for Information Interchange, better known by
|
|
its acronym ASCII, was standardized. ASCII defined numeric codes for various
|
|
characters, with the numeric values running from 0 to 127. For example, the
|
|
lowercase letter 'a' is assigned 97 as its code value.
|
|
|
|
ASCII was an American-developed standard, so it only defined unaccented
|
|
characters. There was an 'e', but no 'é' or 'Í'. This meant that languages
|
|
which required accented characters couldn't be faithfully represented in ASCII.
|
|
(Actually the missing accents matter for English, too, which contains words such
|
|
as 'naïve' and 'café', and some publications have house styles which require
|
|
spellings such as 'coöperate'.)
|
|
|
|
For a while people just wrote programs that didn't display accents. I remember
|
|
looking at Apple ][ BASIC programs, published in French-language publications in
|
|
the mid-1980s, that had lines like these::
|
|
|
|
PRINT "FICHIER EST COMPLETE."
|
|
PRINT "CARACTERE NON ACCEPTE."
|
|
|
|
Those messages should contain accents, and they just look wrong to someone who
|
|
can read French.
|
|
|
|
In the 1980s, almost all personal computers were 8-bit, meaning that bytes could
|
|
hold values ranging from 0 to 255. ASCII codes only went up to 127, so some
|
|
machines assigned values between 128 and 255 to accented characters. Different
|
|
machines had different codes, however, which led to problems exchanging files.
|
|
Eventually various commonly used sets of values for the 128-255 range emerged.
|
|
Some were true standards, defined by the International Standards Organization,
|
|
and some were **de facto** conventions that were invented by one company or
|
|
another and managed to catch on.
|
|
|
|
255 characters aren't very many. For example, you can't fit both the accented
|
|
characters used in Western Europe and the Cyrillic alphabet used for Russian
|
|
into the 128-255 range because there are more than 127 such characters.
|
|
|
|
You could write files using different codes (all your Russian files in a coding
|
|
system called KOI8, all your French files in a different coding system called
|
|
Latin1), but what if you wanted to write a French document that quotes some
|
|
Russian text? In the 1980s people began to want to solve this problem, and the
|
|
Unicode standardization effort began.
|
|
|
|
Unicode started out using 16-bit characters instead of 8-bit characters. 16
|
|
bits means you have 2^16 = 65,536 distinct values available, making it possible
|
|
to represent many different characters from many different alphabets; an initial
|
|
goal was to have Unicode contain the alphabets for every single human language.
|
|
It turns out that even 16 bits isn't enough to meet that goal, and the modern
|
|
Unicode specification uses a wider range of codes, 0-1,114,111 (0x10ffff in
|
|
base-16).
|
|
|
|
There's a related ISO standard, ISO 10646. Unicode and ISO 10646 were
|
|
originally separate efforts, but the specifications were merged with the 1.1
|
|
revision of Unicode.
|
|
|
|
(This discussion of Unicode's history is highly simplified. I don't think the
|
|
average Python programmer needs to worry about the historical details; consult
|
|
the Unicode consortium site listed in the References for more information.)
|
|
|
|
|
|
Definitions
|
|
-----------
|
|
|
|
A **character** is the smallest possible component of a text. 'A', 'B', 'C',
|
|
etc., are all different characters. So are 'È' and 'Í'. Characters are
|
|
abstractions, and vary depending on the language or context you're talking
|
|
about. For example, the symbol for ohms (Ω) is usually drawn much like the
|
|
capital letter omega (Ω) in the Greek alphabet (they may even be the same in
|
|
some fonts), but these are two different characters that have different
|
|
meanings.
|
|
|
|
The Unicode standard describes how characters are represented by **code
|
|
points**. A code point is an integer value, usually denoted in base 16. In the
|
|
standard, a code point is written using the notation U+12ca to mean the
|
|
character with value 0x12ca (4810 decimal). The Unicode standard contains a lot
|
|
of tables listing characters and their corresponding code points::
|
|
|
|
0061 'a'; LATIN SMALL LETTER A
|
|
0062 'b'; LATIN SMALL LETTER B
|
|
0063 'c'; LATIN SMALL LETTER C
|
|
...
|
|
007B '{'; LEFT CURLY BRACKET
|
|
|
|
Strictly, these definitions imply that it's meaningless to say 'this is
|
|
character U+12ca'. U+12ca is a code point, which represents some particular
|
|
character; in this case, it represents the character 'ETHIOPIC SYLLABLE WI'. In
|
|
informal contexts, this distinction between code points and characters will
|
|
sometimes be forgotten.
|
|
|
|
A character is represented on a screen or on paper by a set of graphical
|
|
elements that's called a **glyph**. The glyph for an uppercase A, for example,
|
|
is two diagonal strokes and a horizontal stroke, though the exact details will
|
|
depend on the font being used. Most Python code doesn't need to worry about
|
|
glyphs; figuring out the correct glyph to display is generally the job of a GUI
|
|
toolkit or a terminal's font renderer.
|
|
|
|
|
|
Encodings
|
|
---------
|
|
|
|
To summarize the previous section: a Unicode string is a sequence of code
|
|
points, which are numbers from 0 to 0x10ffff. This sequence needs to be
|
|
represented as a set of bytes (meaning, values from 0-255) in memory. The rules
|
|
for translating a Unicode string into a sequence of bytes are called an
|
|
**encoding**.
|
|
|
|
The first encoding you might think of is an array of 32-bit integers. In this
|
|
representation, the string "Python" would look like this::
|
|
|
|
P y t h o n
|
|
0x50 00 00 00 79 00 00 00 74 00 00 00 68 00 00 00 6f 00 00 00 6e 00 00 00
|
|
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
|
|
|
|
This representation is straightforward but using it presents a number of
|
|
problems.
|
|
|
|
1. It's not portable; different processors order the bytes differently.
|
|
|
|
2. It's very wasteful of space. In most texts, the majority of the code points
|
|
are less than 127, or less than 255, so a lot of space is occupied by zero
|
|
bytes. The above string takes 24 bytes compared to the 6 bytes needed for an
|
|
ASCII representation. Increased RAM usage doesn't matter too much (desktop
|
|
computers have megabytes of RAM, and strings aren't usually that large), but
|
|
expanding our usage of disk and network bandwidth by a factor of 4 is
|
|
intolerable.
|
|
|
|
3. It's not compatible with existing C functions such as ``strlen()``, so a new
|
|
family of wide string functions would need to be used.
|
|
|
|
4. Many Internet standards are defined in terms of textual data, and can't
|
|
handle content with embedded zero bytes.
|
|
|
|
Generally people don't use this encoding, instead choosing other
|
|
encodings that are more efficient and convenient. UTF-8 is probably
|
|
the most commonly supported encoding; it will be discussed below.
|
|
|
|
Encodings don't have to handle every possible Unicode character, and most
|
|
encodings don't. The rules for converting a Unicode string into the ASCII
|
|
encoding, for example, are simple; for each code point:
|
|
|
|
1. If the code point is < 128, each byte is the same as the value of the code
|
|
point.
|
|
|
|
2. If the code point is 128 or greater, the Unicode string can't be represented
|
|
in this encoding. (Python raises a :exc:`UnicodeEncodeError` exception in this
|
|
case.)
|
|
|
|
Latin-1, also known as ISO-8859-1, is a similar encoding. Unicode code points
|
|
0-255 are identical to the Latin-1 values, so converting to this encoding simply
|
|
requires converting code points to byte values; if a code point larger than 255
|
|
is encountered, the string can't be encoded into Latin-1.
|
|
|
|
Encodings don't have to be simple one-to-one mappings like Latin-1. Consider
|
|
IBM's EBCDIC, which was used on IBM mainframes. Letter values weren't in one
|
|
block: 'a' through 'i' had values from 129 to 137, but 'j' through 'r' were 145
|
|
through 153. If you wanted to use EBCDIC as an encoding, you'd probably use
|
|
some sort of lookup table to perform the conversion, but this is largely an
|
|
internal detail.
|
|
|
|
UTF-8 is one of the most commonly used encodings. UTF stands for "Unicode
|
|
Transformation Format", and the '8' means that 8-bit numbers are used in the
|
|
encoding. (There's also a UTF-16 encoding, but it's less frequently used than
|
|
UTF-8.) UTF-8 uses the following rules:
|
|
|
|
1. If the code point is <128, it's represented by the corresponding byte value.
|
|
2. If the code point is between 128 and 0x7ff, it's turned into two byte values
|
|
between 128 and 255.
|
|
3. Code points >0x7ff are turned into three- or four-byte sequences, where each
|
|
byte of the sequence is between 128 and 255.
|
|
|
|
UTF-8 has several convenient properties:
|
|
|
|
1. It can handle any Unicode code point.
|
|
2. A Unicode string is turned into a string of bytes containing no embedded zero
|
|
bytes. This avoids byte-ordering issues, and means UTF-8 strings can be
|
|
processed by C functions such as ``strcpy()`` and sent through protocols that
|
|
can't handle zero bytes.
|
|
3. A string of ASCII text is also valid UTF-8 text.
|
|
4. UTF-8 is fairly compact; the majority of code points are turned into two
|
|
bytes, and values less than 128 occupy only a single byte.
|
|
5. If bytes are corrupted or lost, it's possible to determine the start of the
|
|
next UTF-8-encoded code point and resynchronize. It's also unlikely that
|
|
random 8-bit data will look like valid UTF-8.
|
|
|
|
|
|
|
|
References
|
|
----------
|
|
|
|
The Unicode Consortium site at <http://www.unicode.org> has character charts, a
|
|
glossary, and PDF versions of the Unicode specification. Be prepared for some
|
|
difficult reading. <http://www.unicode.org/history/> is a chronology of the
|
|
origin and development of Unicode.
|
|
|
|
To help understand the standard, Jukka Korpela has written an introductory guide
|
|
to reading the Unicode character tables, available at
|
|
<http://www.cs.tut.fi/~jkorpela/unicode/guide.html>.
|
|
|
|
Another good introductory article was written by Joel Spolsky
|
|
<http://www.joelonsoftware.com/articles/Unicode.html>.
|
|
If this introduction didn't make things clear to you, you should try reading this
|
|
alternate article before continuing.
|
|
|
|
.. Jason Orendorff XXX http://www.jorendorff.com/articles/unicode/ is broken
|
|
|
|
Wikipedia entries are often helpful; see the entries for "character encoding"
|
|
<http://en.wikipedia.org/wiki/Character_encoding> and UTF-8
|
|
<http://en.wikipedia.org/wiki/UTF-8>, for example.
|
|
|
|
|
|
Python 2.x's Unicode Support
|
|
============================
|
|
|
|
Now that you've learned the rudiments of Unicode, we can look at Python's
|
|
Unicode features.
|
|
|
|
The String Type
|
|
---------------
|
|
|
|
Since Python 3.0, the language features a ``str`` type that contain Unicode
|
|
characters, meaning any string created using ``"unicode rocks!"``, ``'unicode
|
|
rocks!'``, or the triple-quoted string syntax is stored as Unicode.
|
|
|
|
To insert a Unicode character that is not part ASCII, e.g., any letters with
|
|
accents, one can use escape sequences in their string literals as such::
|
|
|
|
>>> "\N{GREEK CAPITAL LETTER DELTA}" # Using the character name
|
|
'\u0394'
|
|
>>> "\u0394" # Using a 16-bit hex value
|
|
'\u0394'
|
|
>>> "\U00000394" # Using a 32-bit hex value
|
|
'\u0394'
|
|
|
|
In addition, one can create a string using the :func:`decode` method of
|
|
:class:`bytes`. This method takes an encoding, such as UTF-8, and, optionally,
|
|
an *errors* argument.
|
|
|
|
The *errors* argument specifies the response when the input string can't be
|
|
converted according to the encoding's rules. Legal values for this argument are
|
|
'strict' (raise a :exc:`UnicodeDecodeError` exception), 'replace' (use U+FFFD,
|
|
'REPLACEMENT CHARACTER'), or 'ignore' (just leave the character out of the
|
|
Unicode result). The following examples show the differences::
|
|
|
|
>>> b'\x80abc'.decode("utf-8", "strict")
|
|
Traceback (most recent call last):
|
|
File "<stdin>", line 1, in ?
|
|
UnicodeDecodeError: 'utf8' codec can't decode byte 0x80 in position 0:
|
|
unexpected code byte
|
|
>>> b'\x80abc'.decode("utf-8", "replace")
|
|
'\ufffdabc'
|
|
>>> b'\x80abc'.decode("utf-8", "ignore")
|
|
'abc'
|
|
|
|
Encodings are specified as strings containing the encoding's name. Python 3.2
|
|
comes with roughly 100 different encodings; see the Python Library Reference at
|
|
:ref:`standard-encodings` for a list. Some encodings have multiple names; for
|
|
example, 'latin-1', 'iso_8859_1' and '8859' are all synonyms for the same
|
|
encoding.
|
|
|
|
One-character Unicode strings can also be created with the :func:`chr`
|
|
built-in function, which takes integers and returns a Unicode string of length 1
|
|
that contains the corresponding code point. The reverse operation is the
|
|
built-in :func:`ord` function that takes a one-character Unicode string and
|
|
returns the code point value::
|
|
|
|
>>> chr(40960)
|
|
'\ua000'
|
|
>>> ord('\ua000')
|
|
40960
|
|
|
|
Converting to Bytes
|
|
-------------------
|
|
|
|
Another important str method is ``.encode([encoding], [errors='strict'])``,
|
|
which returns a ``bytes`` representation of the Unicode string, encoded in the
|
|
requested encoding. The ``errors`` parameter is the same as the parameter of
|
|
the :meth:`decode` method, with one additional possibility; as well as 'strict',
|
|
'ignore', and 'replace' (which in this case inserts a question mark instead of
|
|
the unencodable character), you can also pass 'xmlcharrefreplace' which uses
|
|
XML's character references. The following example shows the different results::
|
|
|
|
>>> u = chr(40960) + 'abcd' + chr(1972)
|
|
>>> u.encode('utf-8')
|
|
b'\xea\x80\x80abcd\xde\xb4'
|
|
>>> u.encode('ascii')
|
|
Traceback (most recent call last):
|
|
File "<stdin>", line 1, in ?
|
|
UnicodeEncodeError: 'ascii' codec can't encode character '\ua000' in
|
|
position 0: ordinal not in range(128)
|
|
>>> u.encode('ascii', 'ignore')
|
|
b'abcd'
|
|
>>> u.encode('ascii', 'replace')
|
|
b'?abcd?'
|
|
>>> u.encode('ascii', 'xmlcharrefreplace')
|
|
b'ꀀabcd޴'
|
|
|
|
The low-level routines for registering and accessing the available encodings are
|
|
found in the :mod:`codecs` module. However, the encoding and decoding functions
|
|
returned by this module are usually more low-level than is comfortable, so I'm
|
|
not going to describe the :mod:`codecs` module here. If you need to implement a
|
|
completely new encoding, you'll need to learn about the :mod:`codecs` module
|
|
interfaces, but implementing encodings is a specialized task that also won't be
|
|
covered here. Consult the Python documentation to learn more about this module.
|
|
|
|
|
|
Unicode Literals in Python Source Code
|
|
--------------------------------------
|
|
|
|
In Python source code, specific Unicode code points can be written using the
|
|
``\u`` escape sequence, which is followed by four hex digits giving the code
|
|
point. The ``\U`` escape sequence is similar, but expects 8 hex digits, not 4::
|
|
|
|
>>> s = "a\xac\u1234\u20ac\U00008000"
|
|
^^^^ two-digit hex escape
|
|
^^^^^ four-digit Unicode escape
|
|
^^^^^^^^^^ eight-digit Unicode escape
|
|
>>> for c in s: print(ord(c), end=" ")
|
|
...
|
|
97 172 4660 8364 32768
|
|
|
|
Using escape sequences for code points greater than 127 is fine in small doses,
|
|
but becomes an annoyance if you're using many accented characters, as you would
|
|
in a program with messages in French or some other accent-using language. You
|
|
can also assemble strings using the :func:`chr` built-in function, but this is
|
|
even more tedious.
|
|
|
|
Ideally, you'd want to be able to write literals in your language's natural
|
|
encoding. You could then edit Python source code with your favorite editor
|
|
which would display the accented characters naturally, and have the right
|
|
characters used at runtime.
|
|
|
|
Python supports writing source code in UTF-8 by default, but you can use almost
|
|
any encoding if you declare the encoding being used. This is done by including
|
|
a special comment as either the first or second line of the source file::
|
|
|
|
#!/usr/bin/env python
|
|
# -*- coding: latin-1 -*-
|
|
|
|
u = 'abcdé'
|
|
print(ord(u[-1]))
|
|
|
|
The syntax is inspired by Emacs's notation for specifying variables local to a
|
|
file. Emacs supports many different variables, but Python only supports
|
|
'coding'. The ``-*-`` symbols indicate to Emacs that the comment is special;
|
|
they have no significance to Python but are a convention. Python looks for
|
|
``coding: name`` or ``coding=name`` in the comment.
|
|
|
|
If you don't include such a comment, the default encoding used will be UTF-8 as
|
|
already mentioned.
|
|
|
|
|
|
Unicode Properties
|
|
------------------
|
|
|
|
The Unicode specification includes a database of information about code points.
|
|
For each code point that's defined, the information includes the character's
|
|
name, its category, the numeric value if applicable (Unicode has characters
|
|
representing the Roman numerals and fractions such as one-third and
|
|
four-fifths). There are also properties related to the code point's use in
|
|
bidirectional text and other display-related properties.
|
|
|
|
The following program displays some information about several characters, and
|
|
prints the numeric value of one particular character::
|
|
|
|
import unicodedata
|
|
|
|
u = chr(233) + chr(0x0bf2) + chr(3972) + chr(6000) + chr(13231)
|
|
|
|
for i, c in enumerate(u):
|
|
print(i, '%04x' % ord(c), unicodedata.category(c), end=" ")
|
|
print(unicodedata.name(c))
|
|
|
|
# Get numeric value of second character
|
|
print(unicodedata.numeric(u[1]))
|
|
|
|
When run, this prints::
|
|
|
|
0 00e9 Ll LATIN SMALL LETTER E WITH ACUTE
|
|
1 0bf2 No TAMIL NUMBER ONE THOUSAND
|
|
2 0f84 Mn TIBETAN MARK HALANTA
|
|
3 1770 Lo TAGBANWA LETTER SA
|
|
4 33af So SQUARE RAD OVER S SQUARED
|
|
1000.0
|
|
|
|
The category codes are abbreviations describing the nature of the character.
|
|
These are grouped into categories such as "Letter", "Number", "Punctuation", or
|
|
"Symbol", which in turn are broken up into subcategories. To take the codes
|
|
from the above output, ``'Ll'`` means 'Letter, lowercase', ``'No'`` means
|
|
"Number, other", ``'Mn'`` is "Mark, nonspacing", and ``'So'`` is "Symbol,
|
|
other". See
|
|
<http://www.unicode.org/reports/tr44/#General_Category_Values> for a
|
|
list of category codes.
|
|
|
|
References
|
|
----------
|
|
|
|
The ``str`` type is described in the Python library reference at
|
|
:ref:`typesseq`.
|
|
|
|
The documentation for the :mod:`unicodedata` module.
|
|
|
|
The documentation for the :mod:`codecs` module.
|
|
|
|
Marc-André Lemburg gave a presentation at EuroPython 2002 titled "Python and
|
|
Unicode". A PDF version of his slides is available at
|
|
<http://downloads.egenix.com/python/Unicode-EPC2002-Talk.pdf>, and is an
|
|
excellent overview of the design of Python's Unicode features (based on Python
|
|
2, where the Unicode string type is called ``unicode`` and literals start with
|
|
``u``).
|
|
|
|
|
|
Reading and Writing Unicode Data
|
|
================================
|
|
|
|
Once you've written some code that works with Unicode data, the next problem is
|
|
input/output. How do you get Unicode strings into your program, and how do you
|
|
convert Unicode into a form suitable for storage or transmission?
|
|
|
|
It's possible that you may not need to do anything depending on your input
|
|
sources and output destinations; you should check whether the libraries used in
|
|
your application support Unicode natively. XML parsers often return Unicode
|
|
data, for example. Many relational databases also support Unicode-valued
|
|
columns and can return Unicode values from an SQL query.
|
|
|
|
Unicode data is usually converted to a particular encoding before it gets
|
|
written to disk or sent over a socket. It's possible to do all the work
|
|
yourself: open a file, read an 8-bit byte string from it, and convert the string
|
|
with ``str(bytes, encoding)``. However, the manual approach is not recommended.
|
|
|
|
One problem is the multi-byte nature of encodings; one Unicode character can be
|
|
represented by several bytes. If you want to read the file in arbitrary-sized
|
|
chunks (say, 1K or 4K), you need to write error-handling code to catch the case
|
|
where only part of the bytes encoding a single Unicode character are read at the
|
|
end of a chunk. One solution would be to read the entire file into memory and
|
|
then perform the decoding, but that prevents you from working with files that
|
|
are extremely large; if you need to read a 2Gb file, you need 2Gb of RAM.
|
|
(More, really, since for at least a moment you'd need to have both the encoded
|
|
string and its Unicode version in memory.)
|
|
|
|
The solution would be to use the low-level decoding interface to catch the case
|
|
of partial coding sequences. The work of implementing this has already been
|
|
done for you: the built-in :func:`open` function can return a file-like object
|
|
that assumes the file's contents are in a specified encoding and accepts Unicode
|
|
parameters for methods such as ``.read()`` and ``.write()``. This works through
|
|
:func:`open`\'s *encoding* and *errors* parameters which are interpreted just
|
|
like those in string objects' :meth:`encode` and :meth:`decode` methods.
|
|
|
|
Reading Unicode from a file is therefore simple::
|
|
|
|
f = open('unicode.rst', encoding='utf-8')
|
|
for line in f:
|
|
print(repr(line))
|
|
|
|
It's also possible to open files in update mode, allowing both reading and
|
|
writing::
|
|
|
|
f = open('test', encoding='utf-8', mode='w+')
|
|
f.write('\u4500 blah blah blah\n')
|
|
f.seek(0)
|
|
print(repr(f.readline()[:1]))
|
|
f.close()
|
|
|
|
The Unicode character U+FEFF is used as a byte-order mark (BOM), and is often
|
|
written as the first character of a file in order to assist with autodetection
|
|
of the file's byte ordering. Some encodings, such as UTF-16, expect a BOM to be
|
|
present at the start of a file; when such an encoding is used, the BOM will be
|
|
automatically written as the first character and will be silently dropped when
|
|
the file is read. There are variants of these encodings, such as 'utf-16-le'
|
|
and 'utf-16-be' for little-endian and big-endian encodings, that specify one
|
|
particular byte ordering and don't skip the BOM.
|
|
|
|
In some areas, it is also convention to use a "BOM" at the start of UTF-8
|
|
encoded files; the name is misleading since UTF-8 is not byte-order dependent.
|
|
The mark simply announces that the file is encoded in UTF-8. Use the
|
|
'utf-8-sig' codec to automatically skip the mark if present for reading such
|
|
files.
|
|
|
|
|
|
Unicode filenames
|
|
-----------------
|
|
|
|
Most of the operating systems in common use today support filenames that contain
|
|
arbitrary Unicode characters. Usually this is implemented by converting the
|
|
Unicode string into some encoding that varies depending on the system. For
|
|
example, Mac OS X uses UTF-8 while Windows uses a configurable encoding; on
|
|
Windows, Python uses the name "mbcs" to refer to whatever the currently
|
|
configured encoding is. On Unix systems, there will only be a filesystem
|
|
encoding if you've set the ``LANG`` or ``LC_CTYPE`` environment variables; if
|
|
you haven't, the default encoding is ASCII.
|
|
|
|
The :func:`sys.getfilesystemencoding` function returns the encoding to use on
|
|
your current system, in case you want to do the encoding manually, but there's
|
|
not much reason to bother. When opening a file for reading or writing, you can
|
|
usually just provide the Unicode string as the filename, and it will be
|
|
automatically converted to the right encoding for you::
|
|
|
|
filename = 'filename\u4500abc'
|
|
f = open(filename, 'w')
|
|
f.write('blah\n')
|
|
f.close()
|
|
|
|
Functions in the :mod:`os` module such as :func:`os.stat` will also accept Unicode
|
|
filenames.
|
|
|
|
:func:`os.listdir`, which returns filenames, raises an issue: should it return
|
|
the Unicode version of filenames, or should it return byte strings containing
|
|
the encoded versions? :func:`os.listdir` will do both, depending on whether you
|
|
provided the directory path as a byte string or a Unicode string. If you pass a
|
|
Unicode string as the path, filenames will be decoded using the filesystem's
|
|
encoding and a list of Unicode strings will be returned, while passing a byte
|
|
path will return the byte string versions of the filenames. For example,
|
|
assuming the default filesystem encoding is UTF-8, running the following
|
|
program::
|
|
|
|
fn = 'filename\u4500abc'
|
|
f = open(fn, 'w')
|
|
f.close()
|
|
|
|
import os
|
|
print(os.listdir(b'.'))
|
|
print(os.listdir('.'))
|
|
|
|
will produce the following output::
|
|
|
|
amk:~$ python t.py
|
|
[b'.svn', b'filename\xe4\x94\x80abc', ...]
|
|
['.svn', 'filename\u4500abc', ...]
|
|
|
|
The first list contains UTF-8-encoded filenames, and the second list contains
|
|
the Unicode versions.
|
|
|
|
Note that in most occasions, the Unicode APIs should be used. The bytes APIs
|
|
should only be used on systems where undecodable file names can be present,
|
|
i.e. Unix systems.
|
|
|
|
|
|
|
|
Tips for Writing Unicode-aware Programs
|
|
---------------------------------------
|
|
|
|
This section provides some suggestions on writing software that deals with
|
|
Unicode.
|
|
|
|
The most important tip is:
|
|
|
|
Software should only work with Unicode strings internally, converting to a
|
|
particular encoding on output.
|
|
|
|
If you attempt to write processing functions that accept both Unicode and byte
|
|
strings, you will find your program vulnerable to bugs wherever you combine the
|
|
two different kinds of strings. There is no automatic encoding or decoding if
|
|
you do e.g. ``str + bytes``, a :exc:`TypeError` is raised for this expression.
|
|
|
|
It's easy to miss such problems if you only test your software with data that
|
|
doesn't contain any accents; everything will seem to work, but there's actually
|
|
a bug in your program waiting for the first user who attempts to use characters
|
|
> 127. A second tip, therefore, is:
|
|
|
|
Include characters > 127 and, even better, characters > 255 in your test
|
|
data.
|
|
|
|
When using data coming from a web browser or some other untrusted source, a
|
|
common technique is to check for illegal characters in a string before using the
|
|
string in a generated command line or storing it in a database. If you're doing
|
|
this, be careful to check the string once it's in the form that will be used or
|
|
stored; it's possible for encodings to be used to disguise characters. This is
|
|
especially true if the input data also specifies the encoding; many encodings
|
|
leave the commonly checked-for characters alone, but Python includes some
|
|
encodings such as ``'base64'`` that modify every single character.
|
|
|
|
For example, let's say you have a content management system that takes a Unicode
|
|
filename, and you want to disallow paths with a '/' character. You might write
|
|
this code::
|
|
|
|
def read_file(filename, encoding):
|
|
if '/' in filename:
|
|
raise ValueError("'/' not allowed in filenames")
|
|
unicode_name = filename.decode(encoding)
|
|
f = open(unicode_name, 'r')
|
|
# ... return contents of file ...
|
|
|
|
However, if an attacker could specify the ``'base64'`` encoding, they could pass
|
|
``'L2V0Yy9wYXNzd2Q='``, which is the base-64 encoded form of the string
|
|
``'/etc/passwd'``, to read a system file. The above code looks for ``'/'``
|
|
characters in the encoded form and misses the dangerous character in the
|
|
resulting decoded form.
|
|
|
|
References
|
|
----------
|
|
|
|
The PDF slides for Marc-André Lemburg's presentation "Writing Unicode-aware
|
|
Applications in Python" are available at
|
|
<http://downloads.egenix.com/python/LSM2005-Developing-Unicode-aware-applications-in-Python.pdf>
|
|
and discuss questions of character encodings as well as how to internationalize
|
|
and localize an application.
|
|
|
|
|
|
Revision History and Acknowledgements
|
|
=====================================
|
|
|
|
Thanks to the following people who have noted errors or offered suggestions on
|
|
this article: Nicholas Bastin, Marius Gedminas, Kent Johnson, Ken Krugler,
|
|
Marc-André Lemburg, Martin von Löwis, Chad Whitacre.
|
|
|
|
Version 1.0: posted August 5 2005.
|
|
|
|
Version 1.01: posted August 7 2005. Corrects factual and markup errors; adds
|
|
several links.
|
|
|
|
Version 1.02: posted August 16 2005. Corrects factual errors.
|
|
|
|
Version 1.1: Feb-Nov 2008. Updates the document with respect to Python 3 changes.
|
|
|
|
Version 1.11: posted June 20 2010. Notes that Python 3.x is not covered,
|
|
and that the HOWTO only covers 2.x.
|
|
|
|
.. comment Describe Python 3.x support (new section? new document?)
|
|
.. comment Additional topic: building Python w/ UCS2 or UCS4 support
|
|
.. comment Describe use of codecs.StreamRecoder and StreamReaderWriter
|
|
|
|
.. comment
|
|
Original outline:
|
|
|
|
- [ ] Unicode introduction
|
|
- [ ] ASCII
|
|
- [ ] Terms
|
|
- [ ] Character
|
|
- [ ] Code point
|
|
- [ ] Encodings
|
|
- [ ] Common encodings: ASCII, Latin-1, UTF-8
|
|
- [ ] Unicode Python type
|
|
- [ ] Writing unicode literals
|
|
- [ ] Obscurity: -U switch
|
|
- [ ] Built-ins
|
|
- [ ] unichr()
|
|
- [ ] ord()
|
|
- [ ] unicode() constructor
|
|
- [ ] Unicode type
|
|
- [ ] encode(), decode() methods
|
|
- [ ] Unicodedata module for character properties
|
|
- [ ] I/O
|
|
- [ ] Reading/writing Unicode data into files
|
|
- [ ] Byte-order marks
|
|
- [ ] Unicode filenames
|
|
- [ ] Writing Unicode programs
|
|
- [ ] Do everything in Unicode
|
|
- [ ] Declaring source code encodings (PEP 263)
|
|
- [ ] Other issues
|
|
- [ ] Building Python (UCS2, UCS4)
|