imports e.g. test_support must do so using an absolute package name
such as "import test.test_support" or "from test import test_support".
This also updates the README in Lib/test, and gets rid of the
duplicate data dirctory in Lib/test/data (replaced by
Lib/email/test/data).
Now Tim and Jack can have at it. :)
array. Our samplesort special-cases the snot out of this, running about
12x faster than *sort. The experimental mergesort runs it about 8x
faster than *sort without special-casing, but should really do better
than that (when merging runs of different lengths, right now it only
does something clever about finding where the second run begins in
the first and where the first run ends in the second, and that's more
of a temp-memory optimization).
(i.e. email.test), so move the guts of them here from Lib/test. The
latter directory will retain stubs to run the email.test tests using
Python's standard regression test.
test_email_torture.py is a torture tester which will not run under
Python's test suite because I don't want to commit megs of data to
that project (it will fail cleanly there). When run under the mimelib
project it'll stress test the package with megs of message samples
collected from various locations in the wild.
version of PySlice_GetIndicesEx"):
> OK. Michael, if you want to check in indices(), go ahead.
Then I did what was needed, but didn't check it in. Here it is.
the default range to end at 2**20 (machines are much faster now).
Fixed what was quite a arguably a bug, explaining an old mystery: the
"!sort" case here contructs what *was* a quadratic-time disaster for
the old quicksort implementation. But under the current samplesort, it
always ran much faster than *sort (the random case). This never made
sense. Turns out it was because !sort was sorting an integer array,
while all the other cases sort floats; and comparing ints goes much
quicker than comparing floats in Python. After changing !sort to chew
on floats instead, it's now slower than the random sort case, which
makes more sense (but is just a few percent slower; samplesort is
massively less sensitive to "bad patterns" than quicksort).
existed at the time atexit first got imported. That's a bug, and this
fixes it.
Also reworked test_atexit.py to test for this too, and to stop using
an "expected output" file, and to test what actually happens at exit
instead of just simulating what it thinks atexit will do at exit.
Bugfix candidate, but it's messy so I'll backport to 2.2 myself.
The test of httplib makes it difficult to maintain httplib. There are
two many idioms that pyclbr doesn't seem to understand, and I don't
understand how to update these tests to make them work.
Also remove commented out test of urllib2.
takes much longer to run in the context of the test suite than when run in
isolation. That's because it forces a large number of full collections,
which take time proportional to the total number of gc'ed objects in the
whole system.
But since the dangerous implementation trickery that caused this test to
fail in 2.0, 2.1 and 2.2 doesn't exist in 2.3 anymore (the trashcan
mechanism stopped doing evil things when the possibility for compiling
without cyclic gc was taken away), such an expensive test is no longer
justified. This checkin leaves the test intact, but fiddles the
constants to reduce the runtime by about a factor of 5.
debug-build failure when an instance of a new-style class is resurrected
by a __del__ method -- we simply never had any code that tried this.
This is already fixed in 2.3 CVS. In 2.2.1, it blows up via
Fatal Python error: GC object already in linked list
I'll fix it in 2.2.1 CVS next.
.splitlines() on them, since they may be Header instances.
test_multilingual(), test_header_ctor_default_args(): New tests of
make_header() and that Header can take all default arguments.
ndiff function, so just alias it to assertEqual in that case.
Various: make sure all openfile()/read()'s are wrapped in
try/finally's so the file gets closed.
A bunch of new tests checking the corner cases for multipart/digest
and message/rfc822.
If multiple header fields with the same name occur, they are combined
according to the rules in RFC 2616 sec 4.2:
Appending each subsequent field-value to the first, each separated by
a comma. The order in which header fields with the same field-name are
received is significant to the interpretation of the combined field
value.
folding. Note that some of the Japanese tests have changed, but I
don't really know if they are correct or not. :(
Someone with Japanese and RFC 2047 expertise, please take a look!
Setting the buffer_text attribute to true causes the parser to collect
character data, waiting as long as possible to report it to the Python
callback. This can save an enormous number of callbacks from C to
Python, which can be a substantial performance improvement.
buffer_text defaults to false.
In a fresh interpreter, type.mro(tuple) would segfault, because
PyType_Ready() isn't called for tuple yet. To fix, call
PyType_Ready(type) if type->tp_dict is NULL.
They still run as standalone scripts, but when used as part of the
regression test suite, they are effectively no-ops.
(This is done by renaming test_main to main.)
473985. Through a subtle rearrangement of some members in the etype
struct (!), mapping methods are now preferred over sequence methods,
which is necessary to support str.__getitem__("hello", slice(4)) etc.
that retries the connect() call in timeout mode so it can be shared
between connect() and connect_ex(), and needs only a single #ifdef.
The test for this was doing funky stuff I don't approve of,
so I removed it in favor of a simpler test. This allowed me
to implement a simpler, "purer" form of the timeout retry code.
Hopefully that's enough (if you want to be fancy, use non-blocking
mode and decode the errors yourself, like before).
- setblocking(0) and settimeout(0) are now equivalent, and ditto for
setblocking(1) and settimeout(None).
- Don't raise an exception from internal_select(); let the final call
report the error (this means you will get an EAGAIN error instead of
an ETIMEDOUT error -- I don't care).
- Move the select to inside the Py_{BEGIN,END}_ALLOW_THREADS brackets,
so other theads can run (this was a bug in the original code).
- Redid the retry logic in connect() and connect_ex() to avoid masking
errors. This probably doesn't work for Windows yet; I'll fix that
next. It may also fail on other platforms, depending on what
retrying a connect does; I need help with this.
- Get rid of the retry logic in accept(). I don't think it was needed
at all. But I may be wrong.
This was a simple typo. Strange that the compiler didn't catch it!
Instead of WHY_CONTINUE, two tests used CONTINUE_LOOP, which isn't a
why_code at all, but an opcode; but even though 'why' is declared as
an enum, comparing it to an int is apparently not even worth a
warning -- not in gcc, and not in VC++. :-(
Will fix in 2.2 too.
[ 400998 ] experimental support for extended slicing on lists
somewhat spruced up and better tested than it was when I wrote it.
Includes docs & tests. The whatsnew section needs expanding, and arrays
should support extended slices -- later.
I've made considerable changes to Michael's code, specifically to use
the select() system call directly and to store the timeout as a C
double instead of a Python object; internally, -1.0 (or anything
negative) represents the None from the API.
I'm not 100% sure that all corner cases are covered correctly, so
please keep an eye on this. Next I'm going to try it Windows before
Tim complains.
No way is this a bugfix candidate. :-)
Straightforward fix. Will backport to 2.2. If there's ever a new 2.1
release, this could be backported there too (since it's an issue with
anything that's got both a __reduce__ and a __setstate__).
While I was at it, I added a tp_clear handler and changed the
tp_dealloc handler to use the clear_slots helper for the tp_clear
handler.
Also tightened the rules for slot names: they must now be proper
identifiers (ignoring the dirty little fact that <ctype.h> is locale
sensitive).
Also set mp->flags = READONLY for the __weakref__ pseudo-slot.
Most of this is a 2.2 bugfix candidate; I'll apply it there myself.
Change the module constructor (module_init) to have the signature
__init__(name:str, doc=None); this prevents the call from type_new()
to succeed. While we're at it, prevent repeated calling of
module_init for the same module from leaking the dict, changing the
semantics so that __dict__ is only initialized if NULL.
Also adding a unittest, test_module.py.
This is an incompatibility with 2.2, if anybody was instantiating the
module class before, their argument list was probably empty; so this
can't be backported to 2.2.x.
-f/--fromfile <filename>
option. This runs all and only the tests named in the file, in the
order given (although -x may weed that list, and -r may shuffle it).
Lines starting with '#' are ignored.
This goes a long way toward helping to automate the binary-search-like
procedure I keep reinventing by hand when a test fails due to interaction
among tests (no failure in isolation, and some unknown number of
predecessor tests need to run first -- now you can stick all the test
names in a file, and comment/uncomment blocks of lines until finding a
minimal set of predecessors).
[ 559250 ] more POSIX signal stuff
Adds support (and docs and tests and autoconfery) for posix signal
mask handling -- sigpending, sigprocmask and sigsuspend.
A MemoryError is now raised when the list cannot be created.
There is a test, but as the comment says, it really only
works for 32 bit systems. I don't know how to improve
the test for other systems (ie, 64 bit or systems
where the data size != addressable size,
e.g. 64 bit data, but 48 bit addressable memory)
instead of calling the getaddrlist() method, since the latter doesn't
work with multiple calls (it will return the empty list for the second
and subsequent calls).
Closes SF bug #555035. Include a unittest.
returned a proxy for __class__ whose __bases__ was also a proxy. The
merge_class_dict() helper for dir() assumed incorrectly that __bases__
would always be a tuple and used the in-line tuple API on the proxy.
I will backport this to 2.2 as well.
and the .seed() and .whseed() methods failed to reset it. In other
words, setting the seed didn't completely determine the sequence of
results produced by random.gauss(). It does now. Programs repeatedly
mixing calls to a seed method with calls to gauss() may see different
results now.
Bugfix candidate (random.gauss() has always been broken in this way),
despite that it may change results.
On Win2K it thought 'foo' started at byte offset 0 instead of at the
pagesize, and on Win98 it thought 'foo' didn't exist at all. Somehow
or other this is related to the new "in memory file" gimmicks in
bsddb, but the old bsddb we use on Windows sucks so bad anyway I don't
want to bother digging deeper. Flushing the file in test_mmap after
writing to it makes the problem go away, so good enough.
build's "undetected error" problems were originally detected with
extension types, but we can whitebox test the same situations with
new-style classes.
Also add a test that Python doesn't die with SIGXFSZ if it exceeds the
file rlimit. (Assuming this will also test the behavior when the 2GB
limit is exceed on a platform that doesn't have large file support.)
closes SF #514433
can now pass 'None' as the filename for the bsddb.*open functions,
and you'll get an in-memory temporary store.
docs are ripped out of the bsddb dbopen man page. Fred may want to
clean them up.
Considering this for 2.2, but not 2.1.
http://www.python.org/sf/444708
This adds the optional argument for str.strip
to unicode.strip too and makes it possible
to call str.strip with a unicode argument
and unicode.strip with a str argument.
test data: this test fails on WIndows now if universal newlines are
enabled (which they aren't yet, by default). I don't know whether the
test will also fail on Linux now.
Close a file before trying to unlink it, and apparently Cygwin needs
writes to an mmap'ed file to get flushed before they're visible.
Bugfix candidate, but I think only for the 2.2 line (it's testing
features that I think were new in 2.2).
Change type_get_doc (the get function for __doc__) to look in tp_dict
more often, and if it finds a descriptor in tp_dict, to call it (with
a NULL instance). This means you can add a __doc__ descriptor to a
new-style class that returns instance docs when called on an instance,
and class docs when called on a class -- or the same docs in either
case, but lazily computed.
I'll also check this into the 2.2 maintenance branch.
If a str or unicode method returns the original object,
make sure that for str and unicode subclasses the original
will not be returned.
This should prevent SF bug http://www.python.org/sf/460020
from reappearing.
PyNumber_InPlaceMultiply insisted on calling sq_inplace_repeat if it
existed, even if nb_inplace_multiply also existed and the arguments
weren't right for sq_inplace_repeat. Change this to only use
sq_inplace_repeat if nb_inplace_multiply isn't defined.
Bugfix candidate.
Add a method zfill to str, unicode and UserString and change
Lib/string.py accordingly.
This activates the zfill version in unicodeobject.c that was
commented out and implements the same in stringobject.c. It also
adds the test for unicode support in Lib/string.py back in and
uses repr() instead() of str() (as it was before Lib/string.py 1.62)
Add optional arg to string methods strip(), lstrip(), rstrip().
The optional arg specifies characters to delete.
Also for UserString.
Still to do:
- Misc/NEWS
- LaTeX docs (I did the docstrings though)
- Unicode methods, and Unicode support in the string methods.
The test function's signature should be
test(methodname, input, output, *args)
but the output argument was omitted. This caused all tests to fail,
because the expected output was passed as the initial argument to the
method call. But because of the way the test works (it compares the
results for a regular string to the results for a UserString instance
with the same value, and it's OK if both raise the same exception) the
test never failed!
I've fixed this, and also cleaned up a few warts in the verbose
output. Finally, I've made it possible to run the test stand-alone in
verbose mode by passing -v as a command line argument.
Now, the test will report failure related to zfill. That's not my
fault, that's a legitimate problem: the string_tests.py file contains
a test for the zfill() method (just added) but this method is not
implemented. The responsible party will surely fix this soon now.
non-us-ascii character sets in headers and bodies. Some API changes
(with DeprecationWarnings for the old APIs). Better RFC-compliant
implementations of base64 and quoted-printable.
Updated test cases. Documentation updates to follow (after I finish
writing them ;).
Change pickling format for bools to use a backwards compatible
encoding. This means you can pickle True or False on Python 2.3
and Python 2.2 or before will read it back as 1 or 0. The code
used for pickling bools before would create pickles that could
not be read in previous Python versions.
PEP 285. Everything described in the PEP is here, and there is even
some documentation. I had to fix 12 unit tests; all but one of these
were printing Boolean outcomes that changed from 0/1 to False/True.
(The exception is test_unicode.py, which did a type(x) == type(y)
style comparison. I could've fixed that with a single line using
issubtype(x, type(y)), but instead chose to be explicit about those
places where a bool is expected.
Still to do: perhaps more documentation; change standard library
modules to return False/True from predicates.
Fred Drake
Jeremy Hylton
Barry Warsaw
Tim Peters
Neal Norwitz
Guido van Rossum
Michael W. Hudson
Andrew MacIntyre
Thomas Heller
Jack Jansen
Martin v. Löwis
Raymond Hettinger
Piers Lauder
Skip Montanaro
Neil Schemenauer
Anthony Baxter
Walter Dörwald
Mark Hammond
Marc-André Lemburg
Andrew M. Kuchling