Modify test_coroutines, test_cprofile, test_generators, test_raise,
test_ssl and test_yield_from to use
support.catch_unraisable_exception() rather than
support.captured_stderr().
test_thread: remove test_save_exception_state_on_error() which is now
updated. test_unraisable_exception() checks that sys.unraisablehook()
is called to handle _thread.start_new_thread() exception.
test_cprofile now rely on unittest for test discovery: replace
support.run_unittest() with unittest.main().
* Copy test_exceptions.test_unraisable() to
test_sys.UnraisableHookTest().
* Use catch_unraisable_exception() in test_coroutines,
test_exceptions, test_generators.
* created a c API wrapper for pyDate_FromDate and added the test
* 📜🤖 Added by blurb_it.
* fixed auto-alignment by vscode
* made changes as per PEP7
* Update 2019-05-04-21-25-19.bpo-36782.h3oPIb.rst
* Refactored code as per requested changes
* Remove Whitespace to Fix failed travis build
* Update 2019-05-04-21-25-19.bpo-36782.h3oPIb.rst
* Add a new line at end of ACKS
* Added C API function for PyDateTime_FromDateAndTime
* Added a test for the C API wrapper of PyDateTime_FromDateAndTime
* Added C API function for PyDateTime_FromDateAndTime
* Added a test for the C API wrapper of PyDateTime_FromDateAndTimeAndFold
* Remove Whitespace using patchcheck
* Added a C API function for PyTime_FromTime
* Added a test for the C API wrapper of PyTime_FromTime
* Added a C API function for PyTime_FromTimeAndFold
* Added a test for the C API wrapper of PyTime_FromTimeAndFold
* Added a C API function for PyDelta_FromDSU
* Added a test for the C API wrapper of PyDelta_FromDSU
* Refactor code, re-edit lines longer than 80 chars
* Fix Whitespace issues in DatetimeTester
* List all tests that were added in this PR
* Update 2019-05-04-21-25-19.bpo-36782.h3oPIb.rst
* Reformat code as per PEP7 guidelines
* Remove unused varibles from another function
* Added specific tests for the Fold Attribute
* Update 2019-05-04-21-25-19.bpo-36782.h3oPIb.rst
* Reformat code according to requested changes
* Reformat code to PEP7 Guidelines
* Reformat code to PEP7 Guidelines
* Re-add name to blurb
* Added a backtick to blurb file
* Update 2019-05-04-21-25-19.bpo-36782.h3oPIb.rst
* Remove the need to initialize mandatory parameters
* Make the macro parameter mandatory
* Re-arrange the order of unit-test args
* Removed the need to initialize macro
change all the int macro = 0 to int macro; now that macro is required
Co-Authored-By: Paul Ganssle <pganssle@users.noreply.github.com>
* Removed the need to initialize macro
change all the `int macro = 0` to `int macro`; now that macro is required
Co-Authored-By: Paul Ganssle <pganssle@users.noreply.github.com>
* Removed the need to initialize macro
change all the `int macro = 0` to `int macro`; now that macro is required
Co-Authored-By: Paul Ganssle <pganssle@users.noreply.github.com>
* Removed the need to initialize macro
change all the `int macro = 0` to `int macro`; now that macro is required
Co-Authored-By: Paul Ganssle <pganssle@users.noreply.github.com>
* Removed the need to initialize macro
change all the `int macro = 0` to `int macro`; now that macro is required
Co-Authored-By: Paul Ganssle <pganssle@users.noreply.github.com>
* Removed the need to initialize macro
change all the `int macro = 0` to `int macro`; now that macro is required
Co-Authored-By: Paul Ganssle <pganssle@users.noreply.github.com>
When using multiprocessing (-jN option), worker processes now create
their temporary directory inside the temporary directory of the
main process. So the main process is able to remove temporary
directories of worker processes even if they crash or when they are
killed by regrtest on KeyboardInterrupt (CTRL+c).
Rework also how multiprocessing arguments are parsed in main.py.
"python3 -m test -jN ..." now continues the execution of next tests
when a worker process crash (CHILD_ERROR state). Previously, the test
suite stopped immediately. Use --failfast to stop at the first error.
Moreover, --forever now also implies --failfast.
Modern Linux distros such as Debian Buster have default OpenSSL system
configurations that reject connections to servers with weak certificates
by default. This causes our test suite run with external networking
resources enabled to skip these tests when they encounter such a failure.
Fixing the network servers is a separate issue.
regrtest now always detects uncollectable objects. Previously, the
check was only enabled by --findleaks. The check now also works with
-jN/--multiprocess N.
--findleaks becomes a deprecated alias to --fail-env-changed.
Rewrite run_tests_multiprocess() function as a new MultiprocessRunner
class with multiple methods to better report errors and stop
immediately when needed.
Changes:
* Worker processes are now killed immediately if tests are
interrupted or if a test does crash (CHILD_ERROR): worker
processes are killed.
* Rewrite how errors in a worker thread are reported to
the main thread. No longer ignore BaseException or parsing errors
silently.
* Remove 'finished' variable: use worker.is_alive() instead
* Always compute omitted tests. Add Regrtest.get_executed() method.
Change test_time.test_monotonic() to test only the lower bound of elapsed time
after a sleep command rather than the upper bound. This prevents unnecessary
test failures on slow buildbots. Patch by Victor Stinner.
Add a new _testinternalcapi module to test the internal C API.
Move _Py_GetConfigsAsDict() function to the internal C API:
_testembed now uses _testinternalcapi to access the function.
Fix test_sys.test_getallocatedblocks() when tracemalloc is enabled.
If the name of Python memory allocators cannot get read, consider
that pymalloc is disabled.
Fix the following error:
./python -X tracemalloc -m test test_sys -v -m test_getallocatedblocks
ERROR: test_getallocatedblocks (test.test_sys.SysModuleTest)
------------------------------------------------------------
Traceback (most recent call last):
File "Lib/test/test_sys.py", line 770, in test_getallocatedblocks
alloc_name = _testcapi.pymem_getallocatorsname()
RuntimeError: cannot get allocators name
Fix reference leak hunting in regrtest: compute also deltas (of
reference count, allocated memory blocks, file descriptor count)
during warmup, to ensure that everything is initialized before
starting to hunt reference leaks.
Other changes:
* Replace gc.collect() with support.gc_collect()
* Move calls to read memory statistics from dash_R_cleanup() to
dash_R()
* Pass regrtest 'ns' to dash_R()
* dash_R() is now more quiet with --quiet option (don't display
progress).
* Precompute the full range for "for it in range(repcount):" to
ensure that the iteration doesn't allocate anything new.
* dash_R() now is responsible to call warm_caches().
test_posix.PosixUidGidTests:
* Add tests for invalid uid/gid type (str)
* Add UID_OVERFLOW and GID_OVERFLOW constants to replace (1 << 32)
Initial patch written by David Malcolm.
Co-Authored-By: David Malcolm <dmalcolm@redhat.com>
Use locale.getpreferredencoding() rather than locale.getlocale() to
get the locale encoding. With some locales, locale.getlocale()
returns the wrong encoding.
For example, on Fedora 29, locale.getlocale() returns ISO-8859-1
encoding for the "en_IN" locale, whereas
locale.getpreferredencoding() reports the correct encoding: UTF-8.
Fix test_ssl for strict OpenSSL configuration like RHEL8 strict crypto policy.
Use older TLS version for minimum TLS version of the server SSL context if
needed, to test TLS version older than default minimum TLS version.
It checks that a SyntaxWarning is raised when compile specified
statement, that it is raised only once, that it is converted to
a SyntaxError when raised as exception, and that both warning and
exception objects have corresponding attributes.
Fix Modules/_testmultiphase.c so that it exits with non-zero status on AIX just as other systems do (non zero exit status, e.g. as result of a segmentation fault) when a NULL pointer is accessed for data.
https://bugs.python.org/issue34720
Fix sparse file tests of test_tarfile on ppc64le with the tmpfs
filesystem.
Fix the function testing if the filesystem supports sparse files:
create a file which contains data and "holes", instead of creating a
file which contains no data.
tmpfs effective block size is a page size (tmpfs lives in the page
cache). RHEL uses 64 KiB pages on aarch64, ppc64 and ppc64le, only
s390x and x86_64 use 4 KiB pages, whereas the test punch holes of
4 KiB.
test.pythoninfo: Add resource.getpagesize().
Make ssl tests less strict and also accept TLSv1 as system default. The
changes unbreaks test_min_max_version on Fedora 29.
Signed-off-by: Christian Heimes <christian@python.org>
test_asyncio/test_sendfile.py now resets the event loop policy using
tearDownModule() as done in other tests, to prevent a warning when
running tests on Windows.
Command line options for the xlc compiler behave differently from gcc and clang,
so skip this test case for now when xlc is the compiler.
Patch by aixtools (Michael Felt)
* Fix test_mktime on AIX by adding code to get mktime to behave the
same way as it does on other *nix systems
* Fix test_pthread_getcpuclickid in AIX by adjusting the test case
expectations when running on AIX in 32-bit mode
Patch by Michael Felt.
This test case needs "signed short" bitfields, but the
IBM XLC compiler (on AIX) does not support this.
Skip the code and test when AIX and XLC are used.
Use __xlc__ as identifier to detect the XLC compiler.
* use platform.system() as runtime test, rather than sys.platform() build-time test
* IPv6 zone id support on AIX is limited to inet_pton6_zone(), so skip related
getaddrinfo() and getnameinfo() tests as not supported
Fix a race condition in check_interrupted_write() of test_io:
create directly the thread with SIGALRM signal blocked,
rather than blocking the signal later from the thread. Previously, it
was possible that the thread gets the signal before the signal is
blocked.
Rename test.bisect module to test.bisect_cmd to avoid conflict with
bisect module when running directly a test like
"./python Lib/test/test_xmlrpc.py".
Replace time.time() with time.monotonic() in tests to measure time
delta.
test_zipfile64: display progress every minute (60 secs) rather than
every 5 minutes (5*60 seconds).
bpo-34279, bpo-35412: support.run_unittest() no longer raises
TestDidNotRun if a test result contains skipped tests. The
exception is now only raised if no test have been run and no test
have been skipped.
Modify asyncio tests to utilize the certificates from the test directory
instead of its own set, as they are the same and with each update they had
to be updated as well.
Fix mktime() overflow error in test_email: run
test_localtime_daylight_true_dst_true() and
test_localtime_daylight_false_dst_true() with a specific timezone.
When Python is built with the intel control-flow protection flags,
-mcet -fcf-protection, gdb is not able to read the stack without
actually jumping inside the function. This means an extra
'next' command is required to make the $pc (program counter)
enter the function and make the stack of the function exposed to gdb.
Co-Authored-By: Marcel Plch <gmarcel.plch@gmail.com>
(cherry picked from commit 9b7c74ca32)
We cannot simply call locale.getpreferredencoding() here,
as GDB might have been linked against a different version
of Python with a different encoding and coercion policy
with respect to PEP 538 and PEP 540.
Thanks to Victor Stinner for a hint on how to fix this.
The test tries to fill the receiver's socket buffer and expects an
error. But the RDS protocol doesn't require that. Moreover, the Linux
implementation of RDS expects that the producer of the messages
reduces its rate, it's not the role of the receiver to trigger an
error.
The test fails on Fedora 28 by design, so remove it.
* Modify DEFAULT_CONFIG for AIX
* bedevere/news did not like old name
* Modify NEWS entry
* Modified per peer review
* Define and use NULL_STR constant to account for AIX libc behavior
* Modify per peer review
* Modify NEWS
This causes the tearDown code to only unimport the test modules specifically created as part of each test via the self.mkhier method rather than abusing test.support.modules_setup() and the scary test.support.modules_cleanup() code.
https://bugs.python.org/issue34200
Update all test certs and keys to use future proof crypto settings:
* 3072 bit RSA keys
* SHA-256 signature
Signed-off-by: Christian Heimes <christian@python.org>
Read from data socket to avoid "[SSL] shutdown while in init" exception
during shutdown of the dummy server.
Signed-off-by: Christian Heimes <christian@python.org>
<!-- issue-number: [bpo-34391](https://www.bugs.python.org/issue34391) -->
https://bugs.python.org/issue34391
<!-- /issue-number -->
Downstream vendors have started to deprecate weak keys. Update all RSA keys
and DH params to use at least 2048 bits.
Finite field DH param file use RFC 7919 values, generated with
certtool --get-dh-params --sec-param=high
Signed-off-by: Christian Heimes <christian@python.org>
Enable and fix SMTPUTF8SimTests in test_smtplib.
The tests for SMTPUTF8SimTests in test_smtplib.py were not actually
being run because test_smtplib was still using the 'test_main' pattern,
and the class was never added to test_main.
Additionally, one of the tests needed to be moved to the non-UTF8 server
class because it relies on the server not being UTF-8 compatible (and it
had a bug in in).
Fix bug in `Lib/test/libregrtest/runtest.py` that makes running tests an extra time than the specified number of runs.
Add check for invalid --huntrleaks/-R parameters.
Only make sure that the result is in unittest.signals._results, don't
check the full content of unittest.signals._results.
support._run_suite() uses TextTestRunner in verbose mode, but
TextTestRunner.run() calls registerResult(result) which made the test
fail with "odd object in result set".
Call also removeResult() to restore unittest.signals._results to
avoid test side effect.
Using gdbm 1.15, creating a database creates a file of 16 MiB. Adding
a small entry and then modifying the small entry doesn't change the
file size. Modify test_dbm_gnu to be less strict: allow that the file
size doesn't change.
When Python is built with the intel control-flow protection flags,
-mcet -fcf-protection, gdb is not able to read the stack without
actually jumping inside the function. This means an extra
'next' command is required to make the $pc (program counter)
enter the function and make the stack of the function exposed to gdb.
test_asyncio hangs indefinitely on macOS 10.13.2+ on `read_pty_output()`
using the KqueueSelector. Closing `proto.transport` (as is done in
`write_pty_output()`) seems to fix it.
(cherry picked from commit 12f74d8608)
Co-authored-by: Nathan Henrie <n8henrie@users.noreply.github.com>
Also, re-enable test_read_pty_output on macOS.
Add test cases for IDNA 2003 and 2008 host names. IDNA 2003
internationalized host names are working since bpo-31399 has landed. IDNA
2008 deviations are still broken and will be fixed in another patch.
Signed-off-by: Christian Heimes <christian@python.org>
Add test certs and test for ECDSA cert and EC/RSA dual mode.
I'm also adding certs for IDNA 2003/2008 tests and simplify some test
data handling.
Signed-off-by: Christian Heimes <christian@python.org>
Exactly which locale requests will end up giving
you the "C" locale is actually platform dependent.
A blank locale and "POSIX" will translate to "C"
on most Linux distros, but may not do so on other platforms, so this adjusts the way the tests are structured to better account for that.
This is an initial step towards fixing the current
test failure on Cygwin (hence the issue reference)
Some parts of the C API are only relevant to larger
applications embedding CPython as a runtime engine.
The helpers to test those APIs are already separated
out into Programs/_testembed.c, this update moves
the associated test cases out into their own dedicated
test file.
test.support.HOST should be "localhost" as it was in the past. See the bpo-29639.
Tests that need the IP address should use HOSTv4 (added) or the existing HOSTv6 constant.
This changes the definition and fixes tests that needed updating to deal with HOST being
the hostname rather than the hardcoded IP address.
This is only the first step in addressing https://bugs.python.org/issue29639.
In case PROTOCOL_TLS_SERVER is used for both client context and server
context, the test thread dies with OSError. Catch OSError to avoid
traceback on sys.stderr
Signed-off-by: Christian Heimes <christian@python.org>
OpenSSL 1.1.0 to 1.1.0e aborted the handshake when server and client
could not agree on a protocol using ALPN. OpenSSL 1.1.0f changed that.
The most recent version now behaves like OpenSSL 1.0.2 again. The ALPN
callback can pretend to not been set.
See https://github.com/openssl/openssl/pull/3158 for more details
Signed-off-by: Christian Heimes <christian@python.org>
When running the test suite using --use=all / -u all, exclude tzdata
since it makes test_datetime too slow (15-20 min on some buildbots)
which then times out on some buildbots.
-u tzdata must now be enabled explicitly, -u tzdata or -u all,tzdata,
to run all test_datetime tests.
Fix also regrtest command line parser to allow passing -u
extralargefile to run test_zipfile64.
Travis CI: remove -tzdata. Replace -u all,-tzdata,-cpu with -u all,-cpu since tzdata is now excluded from -u all.
Add "Misc/NEWS.d" directory tree for "blurb".
CPython workflow is changing! We're going to start using "blurb"
to manage Misc/NEWS entries:
https://github.com/python/core-workflow
(This will be a big win for release managers, honest.)
This checkin simply populates the "Misc/NEWS.d" subdirectory tree
so that people can start putting their news entries in there.
No other changes (yet).
Victor Stinner
Christian Heimes
xdegaye
Edison A
Gregory P. Smith
Łukasz Langa
Gordon P. Hemsley
Lihua Zhao
hliu0
Joannah Nanjekye
Ned Deily
Stéphane Wirtel
Serhiy Storchaka
Nick Coghlan
Michael Felt
Matěj Cepl
Giampaolo Rodola
Anthony Shaw
Anthony Sottile
stratakis
Pablo Galindo
Lysandros Nikolaou
Elvis Pranskevichus
Benjamin Peterson
Zackery Spytz
davidair
chason
Marcel Plch
Brett Cannon
Eric Snow
Victor Stinner
larryhastings