Commit Graph

127 Commits

Author SHA1 Message Date
Lihua Zhao 2954550818 bpo-31904: Port test_cmd_line to VxWorks (#12648)
subprocess.Popen doesn't support preexec on VxWorks.
2019-04-17 17:33:25 +02:00
Victor Stinner 06e7608207
Revert "bpo-34589: Add -X coerce_c_locale command line option (GH-9378)" (GH-9430)
* Revert "bpo-34589: Add -X coerce_c_locale command line option (GH-9378)"

This reverts commit dbdee0073c.

* Revert "bpo-34589: C locale coercion off by default (GH-9073)"

This reverts commit 7a0791b699.

* Revert "bpo-34589: Make _PyCoreConfig.coerce_c_locale private (GH-9371)"

This reverts commit 188ebfa475.
2018-09-19 14:56:36 -07:00
Victor Stinner dbdee0073c
bpo-34589: Add -X coerce_c_locale command line option (GH-9378)
Add a new -X coerce_c_locale command line option to control C locale
coercion (PEP 538).
2018-09-17 17:19:26 -07:00
Victor Stinner ecf411c59e
bpo-34170: Enhance _PyCoreConfig_Read() (GH-8468)
* Inline cmdline_get_env_flags() into config_read_env_vars():
  _PyCoreConfig_Read() now reads much more environment variables like
  PYTHONVERBOSE.
* Allow to override faulthandler and allocator even if dev_mode=1.
  PYTHONMALLOC is now the priority over PYTHONDEVMODE.
* Fix _PyCoreConfig_Copy(): copy also install_signal_handlers,
  coerce_c_locale and coerce_c_locale_warn
* _PyCoreConfig.install_signal_handlers default is now 1: install
  signals by default
* Fix also a compiler warning: don't define _PyPathConfig type twice.
2018-07-26 02:37:22 +02:00
Victor Stinner 53b7d4e402
bpo-34170: Add _PyCoreConfig.bytes_warning (GH-8447)
Add more fields to _PyCoreConfig:

* _check_hash_pycs_mode
* bytes_warning
* debug
* inspect
* interactive
* legacy_windows_fs_encoding
* legacy_windows_stdio
* optimization_level
* quiet
* unbuffered_stdio
* user_site_directory
* verbose
* write_bytecode

Changes:

* Remove pymain_get_global_config() and pymain_set_global_config()
  which became useless. These functions have been replaced by
  _PyCoreConfig_GetGlobalConfig() and
  _PyCoreConfig_SetGlobalConfig().
* sys.flags.dont_write_bytecode value is now restricted to 1 even if
  -B option is specified multiple times on the command line.
* PyThreadState_Clear() now uses the config from the current
  interpreter rather than using global Py_VerboseFlag
2018-07-25 01:37:05 +02:00
Victor Stinner 937ee9e745
Revert "bpo-33671: Add support.MS_WINDOWS and support.MACOS (GH-7800)" (GH-7919)
This reverts commit 8fbbdf0c31.
2018-06-26 02:11:06 +02:00
Victor Stinner 8fbbdf0c31
bpo-33671: Add support.MS_WINDOWS and support.MACOS (GH-7800)
* Add support.MS_WINDOWS: True if Python is running on Microsoft Windows.
* Add support.MACOS: True if Python is running on Apple macOS.
* Replace support.is_android with support.ANDROID
* Replace support.is_jython with support.JYTHON
* Cleanup code to initialize unix_shell
2018-06-22 19:25:44 +02:00
Carl Meyer b193fa996a bpo-33499: Add PYTHONPYCACHEPREFIX env var for alt bytecode cache location. (GH-6834)
In some development setups it is inconvenient or impossible to write bytecode
caches to the code tree, but the bytecode caches are still useful. The
PYTHONPYCACHEPREFIX environment variable allows specifying an alternate
location for cached bytecode files, within which a directory tree mirroring the code
tree will be created. This cache tree is then used (for both reading and writing)
instead of the local `__pycache__` subdirectory within each source directory.

Exposed at runtime as sys.pycache_prefix (defaulting to None), and can
be set from the CLI as "-X pycache_prefix=path".

Patch by Carl Meyer.
2018-06-16 14:40:56 +10:00
Steve Dower 48e8c82fc6
bpo-32457: Improves handling of denormalized executable path when launching Python (GH-5756) 2018-02-22 10:39:26 -08:00
Steve Dower 01423cb53b
Improves the ability to build in CI (GH-5728) 2018-02-17 18:59:03 -08:00
Nick Coghlan 9b99747386
bpo-31975 (PEP 565): Show DeprecationWarning in __main__ (GH-4458)
- primary change is to add a new default filter entry for
  'default::DeprecationWarning:__main__'
- secondary change is an internal one to cope with plain
  strings in the warning module's internal filter list
  (this avoids the need to create a compiled regex object
  early on during interpreter startup)
- assorted documentation updates, including many more
  examples of configuring the warnings settings
- additional tests to ensure that both the pure Python and
  the C accelerated warnings modules have the expected
  default configuration
2018-01-08 12:45:02 +10:00
Victor Stinner 9454060e84
bpo-29240, bpo-32030: Py_Main() re-reads config if encoding changes (#4899)
bpo-29240, bpo-32030: If the encoding change (C locale coerced or
UTF-8 Mode changed), Py_Main() now reads again the configuration with
the new encoding.

Changes:

* Add _Py_UnixMain() called by main().
* Rename pymain_free_pymain() to pymain_clear_pymain(), it can now be
  called multipled times.
* Rename pymain_parse_cmdline_envvars() to pymain_read_conf().
* Py_Main() now clears orig_argc and orig_argv at exit.
* Remove argv_copy2, Py_Main() doesn't modify argv anymore. There is
  no need anymore to get two copies of the wchar_t** argv.
* _PyCoreConfig: add coerce_c_locale and coerce_c_locale_warn.
* Py_UTF8Mode is now initialized to -1.
* Locale coercion (PEP 538) now respects -I and -E options.
2017-12-16 04:54:22 +01:00
Victor Stinner 358e5e17a5
bpo-32329: Fix -R option for hash randomization (#4873)
bpo-32329, bpo-32030:

* The -R option now turns on hash randomization when the
  PYTHONHASHSEED environment variable is set to 0 Previously, the
  option was ignored.
* sys.flags.hash_randomization is now properly set to 0 when hash
  randomization is turned off by PYTHONHASHSEED=0.
* _PyCoreConfig_ReadEnv() now reads the PYTHONHASHSEED environment
  variable. _Py_HashRandomization_Init() now only apply the
  configuration, it doesn't read PYTHONHASHSEED anymore.
2017-12-15 00:51:22 +01:00
Victor Stinner 747f48e2e9
bpo-32230: Set sys.warnoptions with -X dev (#4820)
Rather than supporting dev mode directly in the warnings module, this
instead adjusts the initialisation code to add an extra 'default'
entry to sys.warnoptions when dev mode is enabled.

This ensures that dev mode behaves *exactly* as if `-Wdefault` had
been passed on the command line, including in the way it interacts
with `sys.warnoptions`, and with other command line flags like `-bb`.

Fix also bpo-20361: have -b & -bb options take precedence over any
other warnings options.

Patch written by Nick Coghlan, with minor modifications of Victor Stinner.
2017-12-12 22:59:48 +01:00
Victor Stinner 5e3806f8cf
bpo-32101: Add PYTHONDEVMODE environment variable (#4624)
* bpo-32101: Add sys.flags.dev_mode flag
  Rename also the "Developer mode" to the "Development mode".
* bpo-32101: Add PYTHONDEVMODE environment variable
  Mention it in the development chapiter.
2017-11-30 11:40:24 +01:00
Victor Stinner 5d39e04290
bpo-32030: Rework memory allocators (#4625)
* Fix _PyMem_SetupAllocators("debug"): always restore allocators to
  the defaults, rather than only caling _PyMem_SetupDebugHooks().
* Add _PyMem_SetDefaultAllocator() helper to set the "default"
  allocator.
* Add _PyMem_GetAllocatorsName(): get the name of the allocators
* main() now uses debug hooks on memory allocators if Py_DEBUG is
  defined, rather than calling directly malloc()
* Document default memory allocators in C API documentation
* _Py_InitializeCore() now fails with a fatal user error if
  PYTHONMALLOC value is an unknown memory allocator, instead of
  failing with a fatal internal error.
* Add new tests on the PYTHONMALLOC environment variable
* Add support.with_pymalloc()
* Add the _testcapi.WITH_PYMALLOC constant and expose it as
   support.with_pymalloc().
* sysconfig.get_config_var('WITH_PYMALLOC') doesn't work on Windows, so
   replace it with support.with_pymalloc().
* pythoninfo: add _testcapi collector for pymem
2017-11-29 17:20:38 +01:00
Victor Stinner 21c7730761
bpo-32089: Use default action for ResourceWarning (#4584)
In development and debug mode, use the "default" action, rather than
the "always" action, for ResourceWarning in the default warnings
filters.
2017-11-27 12:11:55 +01:00
Victor Stinner 09f3a8a124
bpo-32089: Fix warnings filters in dev mode (#4482)
The developer mode (-X dev) now creates all default warnings filters
to order filters in the correct order to always show ResourceWarning
and make BytesWarning depend on the -b option.

Write a functional test to make sure that ResourceWarning is logged
twice at the same location in the developer mode.

Add a new 'dev_mode' field to _PyCoreConfig.
2017-11-20 17:32:40 -08:00
Victor Stinner ccb0442a33
bpo-32043: New "developer mode": "-X dev" option (#4413)
Add a new "developer mode": new "-X dev" command line option to
enable debug checks at runtime.

Changes:

* Add unit tests for -X dev
* test_cmd_line: replace test.support with support.
* Fix _PyRuntimeState_Fini(): Use the same memory allocator
   than _PyRuntimeState_Init().
* Fix _PyMem_GetDefaultRawAllocator()
2017-11-16 03:20:31 -08:00
Nick Coghlan d7ac06126d bpo-31845: Fix reading flags from environment (GH-4105)
The startup refactoring means command line settings
are now applied after settings are read from the
environment.

This updates the way command line settings are applied
to account for that, ensures more settings are first read
from the environment in _PyInitializeCore, and adds a
simple test case covering the flags that are easy to check.
2017-10-25 12:11:26 +10:00
Serhiy Storchaka 77732be801 bpo-30404: The -u option now makes the stdout and stderr streams totally unbuffered. (#1667) 2017-10-04 20:25:40 +03:00
Nick Coghlan 6ea4186de3 bpo-28180: Implementation for PEP 538 (#659)
- new PYTHONCOERCECLOCALE config setting
- coerces legacy C locale to C.UTF-8, C.utf8 or UTF-8 by default
- always uses C.UTF-8 on Android
- uses `surrogateescape` on stdin and stdout in the coercion
  target locales
- configure option to disable locale coercion at build time
- configure option to disable C locale warning at build time
2017-06-11 13:16:15 +10:00
Eric Snow 6b4be195cd bpo-22257: Small changes for PEP 432. (#1728)
PEP 432 specifies a number of large changes to interpreter startup code, including exposing a cleaner C-API. The major changes depend on a number of smaller changes. This patch includes all those smaller changes.
2017-05-22 21:36:03 -07:00
Serhiy Storchaka 70d28a184c Remove unused imports. 2016-12-16 20:00:15 +02:00
Xavier de Gaye 76febd0792 Issue #26919: On Android, operating system data is now always encoded/decoded
to/from UTF-8, instead of the locale encoding to avoid inconsistencies with
os.fsencode() and os.fsdecode() which are already using UTF-8.
2016-12-15 20:59:58 +01:00
INADA Naoki 0e175a6e76 Issue #28532: Show sys.version when -V option is supplied twice 2016-11-21 20:57:14 +09:00
Martin Panter 02b75abf73 Merge spelling and grammar fixes from 3.5 2016-08-05 01:51:39 +00:00
Martin Panter 69332c1a64 Fix spelling and grammar in documentation and code comments 2016-08-04 13:07:31 +00:00
Gregory P. Smith fcbdf9906b * Re-fix issue #19284: Don't generate the no-op -R command line
parameter to "enable" the always on sys.flags.hash_randomization
  in _args_from_interpreter_flags() used by multiprocessing and
  some unittests.  This simplifies the code.
* assert_python_ok docstring typo fix.
* Fix test_cmd_line not to fail if PYTHONHASHSEED is set to a fixed seed.
2015-12-13 20:15:26 -08:00
Gregory P. Smith 6edadfc9ca * Re-fix issue #19284: Don't generate the no-op -R command line
parameter to "enable" the always on sys.flags.hash_randomization
  in _args_from_interpreter_flags() used by multiprocessing and
  some unittests.  This simplifies the code.
* assert_python_ok docstring typo fix.
* Fix test_cmd_line not to fail if PYTHONHASHSEED is set to a fixed seed.
2015-12-13 20:09:42 -08:00
Gregory P. Smith 220ba72c20 Fix test_cmd_line not to fail if PYTHONHASHSEED is set to a fixed seed
due to test_hash_randomization expecting a different seed per process.
2015-12-13 20:01:44 -08:00
Martin Panter b4ce1fc31b Issue #5319: New Py_FinalizeEx() API to exit with status 120 on failure 2015-11-30 03:18:29 +00:00
Berker Peksag ce643913a9 Issue #9517: Move script_helper to the support package.
Patch by Christie Wilson.
2015-05-06 06:33:17 +03:00
R David Murray 687592def9 Merge: #23925: stop (eg) PYTHONSTARTUP from causing test_cmd_line failure. 2015-04-14 17:58:40 -04:00
R David Murray f4bbc535b9 #23925: stop (eg) PYTHONSTARTUP from causing test_cmd_line failure.
Patch by Jamiel Almeida.
2015-04-14 17:57:41 -04:00
Steve Dower 79938f22ef Suppress assert dialogs in test_cmd_line. 2015-03-07 20:32:16 -08:00
Gregory P. Smith 8f2fae1e7d Skip some tests that require a subinterpreter launched with -E or -I when the
interpreter under test is being run in an environment that requires the use of
environment variables such as PYTHONHOME in order to function at all.

Adds a test.script_helper.interpreter_requires_environment() function
to be used with @unittest.skipIf on stdlib test methods requiring this.
2015-02-04 01:04:31 -08:00
Gregory P. Smith b9a3dd9dfb Skip some tests that require a subinterpreter launched with -E or -I when the
interpreter under test is being run in an environment that requires the use of
environment variables such as PYTHONHOME in order to function at all.

Adds a private test.script_helper._interpreter_requires_environment() function
to be used with @unittest.skipIf on stdlib test methods requiring this.
2015-02-04 00:59:40 -08:00
Gregory P. Smith 48e810069d revert 7b833bd1f509. I misread the side effect that the code was triggering.
*any* kwarg supplied to _assert_python causes it to not append -E to the
command line flags so without='-E' does effectively work.
2015-01-22 22:55:00 -08:00
Gregory P. Smith 566646133e Remove the unimplemented but ignored without='-E' parameters being passed to
script_helper.assert_python_failure().  No such feature has ever existed,
thus it doesn't do what the comment claims.  (It does add a 'without'
variable to the environment of the child process but that was not intended)
2015-01-22 22:04:16 -08:00
Victor Stinner e8785ff82a Close #18754: Run Python child processes in isolated more in the test suite. 2013-10-12 14:44:01 +02:00
Christian Heimes ad73a9cf97 Issue #16400: Add command line option for isolated mode.
-I

    Run Python in isolated mode. This also implies -E and -s. In isolated mode
    sys.path contains neither the script’s directory nor the user’s
    site-packages directory. All PYTHON* environment variables are ignored,
    too. Further restrictions may be imposed to prevent the user from
    injecting malicious code.
2013-08-10 16:36:18 +02:00
Serhiy Storchaka e3ed4edb94 Issue #18338: `python --version` now prints version string to stdout, and
not to stderr.  Patch by Berker Peksag and Michael Dickens.
2013-07-11 20:01:17 +03:00
Victor Stinner ef8115e5eb Issue #17206: Fix test_cmd_line and test_faulthandler for my previous change
(test.regrtest and test.script_helper enable faulthandler module in
subprocesses).
2013-06-25 21:54:17 +02:00
Victor Stinner 3fa1aaebde Issue #17516: do not create useless tuple: remove dummy commas in tests 2013-03-26 01:14:08 +01:00
Ezio Melotti 1f8898a591 #17323: The "[X refs, Y blocks]" printed by debug builds has been disabled by default. It can be re-enabled with the `-X showrefcount` option. 2013-03-26 01:59:56 +02:00
Ezio Melotti a833e0d8ae Merge debug print removal with 3.3. 2012-11-23 22:17:02 +02:00
Ezio Melotti 9ab09d129e Merge debug print removal with 3.2. 2012-11-23 22:16:45 +02:00
Ezio Melotti 82e60de727 Remove debug print. 2012-11-23 22:16:07 +02:00
Ezio Melotti 8b9a8f3c98 #16306: merge with 3.3. 2012-11-23 19:01:42 +02:00