An entry of None in sys.path_importer_cache represents a negative/missing finder for a path, so clearing it out makes sense.
(cherry picked from commit 9e2be60634)
Passing True as the `bind_and_activate` *do* immediately opening and binding to their socket.
(cherry picked from commit e6223579c8)
Co-authored-by: cocoatomo <cocoatomo77@gmail.com>
Historically, -m added the empty string as sys.path
zero, meaning it resolved imports against the current
working directory, the same way -c and the interactive
prompt do.
This changes the sys.path initialisation to add the
*starting* working directory as sys.path[0] instead,
such that changes to the working directory while the
program is running will have no effect on imports
when using the -m switch.
(cherry picked from commit d5d9e02dd3)
- new test case for pre-initialization of sys.warnoptions and sys._xoptions
- restored ability to call these APIs prior to Py_Initialize
- updated the docs for the affected APIs to make it clear they can be
called before Py_Initialize
- also enhanced the existing embedding test cases
to check for expected settings in the sys module
(cherry picked from commit bc77eff8b9)
Co-authored-by: Nick Coghlan <ncoghlan@gmail.com>
* Add What's New entry for addition of datetime.timezone to the C API
Closes bpo-10381
* Add what's new entry for date and datetime optimizations
Closes bpo-32403
(cherry picked from commit 5bd04f964b)
Co-authored-by: Paul Ganssle <pganssle@users.noreply.github.com>
OpenSSL 1.1 has introduced a new API to set the minimum and maximum
supported protocol version. The API is easier to use than the old
OP_NO_TLS1 option flags, too.
Since OpenSSL has no call to set minimum version to highest supported,
the implementation emulate maximum_version = MINIMUM_SUPPORTED and
minimum_version = MAXIMUM_SUPPORTED by figuring out the minumum and
maximum supported version at compile time.
Signed-off-by: Christian Heimes <christian@python.org>
(cherry picked from commit 698dde16f6)
Co-authored-by: Christian Heimes <christian@python.org>
Direct instantiation of SSLSocket and SSLObject objects is now prohibited.
The constructors were never documented, tested, or designed as public
constructors. The SSLSocket constructor had limitations. For example it was
not possible to enabled hostname verification except was
ssl_version=PROTOCOL_TLS_CLIENT with cert_reqs=CERT_REQUIRED.
SSLContext.wrap_socket() and SSLContext.wrap_bio are the recommended API
to construct SSLSocket and SSLObject instances. ssl.wrap_socket() is
also deprecated.
The only test case for direct instantiation was added a couple of days
ago for IDNA testing.
Signed-off-by: Christian Heimes <christian@python.org>
(cherry picked from commit 9d50ab563d)
Co-authored-by: Christian Heimes <christian@python.org>
The ssl module function ssl.wrap_socket() has been de-emphasized
and deprecated in favor of the more secure and efficient
SSLContext.wrap_socket() method.
Signed-off-by: Christian Heimes <christian@python.org>
(cherry picked from commit 90f05a527c)
Co-authored-by: Christian Heimes <christian@python.org>
* bpo-32947: OpenSSL 1.1.1-pre1 / TLS 1.3 fixes
Misc fixes and workarounds for compatibility with OpenSSL 1.1.1-pre1 and
TLS 1.3 support. With OpenSSL 1.1.1, Python negotiates TLS 1.3 by
default. Some test cases only apply to TLS 1.2. Other tests currently
fail because the threaded or async test servers stop after failure.
I'm going to address these issues when OpenSSL 1.1.1 reaches beta.
OpenSSL 1.1.1 has added a new option OP_ENABLE_MIDDLEBOX_COMPAT for TLS
1.3. The feature is enabled by default for maximum compatibility with
broken middle boxes. Users should be able to disable the hack and CPython's test suite needs
it to verify default options.
Signed-off-by: Christian Heimes <christian@python.org>
(cherry picked from commit 05d9fe32a1)
Co-authored-by: Christian Heimes <christian@python.org>
Previously, the ssl module stored international domain names (IDNs)
as U-labels. This is problematic for a number of reasons -- for
example, it made it impossible for users to use a different version
of IDNA than the one built into Python.
After this change, we always convert to A-labels as soon as possible,
and use them for all internal processing. In particular, server_hostname
attribute is now an A-label, and on the server side there's a new
sni_callback that receives the SNI servername as an A-label rather than
a U-label.
(cherry picked from commit 11a1493bc4)
Co-authored-by: Christian Heimes <christian@python.org>
There was an extra dash in the example for re.sub().
(cherry picked from commit b65cb163d6)
Co-authored-by: xpvpc <32843902+xpvpc@users.noreply.github.com>
Until now Python used a hard coded white list of default TLS cipher
suites. The old approach has multiple downsides. OpenSSL's default
selection was completely overruled. Python did neither benefit from new
cipher suites (ChaCha20, TLS 1.3 suites) nor blacklisted cipher suites.
For example we used to re-enable 3DES.
Python now defaults to OpenSSL DEFAULT cipher suite selection and black
lists all unwanted ciphers. Downstream vendors can override the default
cipher list with --with-ssl-default-suites.
Signed-off-by: Christian Heimes <christian@python.org>
socketserver.ForkingMixIn.server_close() and
socketserver.ThreadingMixIn.server_close() now waits until all child
processes and non-daemonic threads complete.
bpo-31399: Let OpenSSL verify hostname and IP
The ssl module now uses OpenSSL's X509_VERIFY_PARAM_set1_host() and
X509_VERIFY_PARAM_set1_ip() API to verify hostname and IP addresses.
* Remove match_hostname calls
* Check for libssl with set1_host, libssl must provide X509_VERIFY_PARAM_set1_host()
* Add documentation for OpenSSL 1.0.2 requirement
* Don't support OpenSSL special mode with a leading dot, e.g. ".example.org" matches "www.example.org". It's not standard conform.
* Add hostname_checks_common_name
Signed-off-by: Christian Heimes <christian@python.org>
The hmac module now has hmac.digest(), which provides an optimized HMAC
digest for short messages. hmac.digest() is up to three times faster
than hmac.HMAC().digest().
Signed-off-by: Christian Heimes <christian@python.org>
* Document `from __future__ import annotations`
* Provide plumbing and tests for `from __future__ import annotations`
* Implement unparsing the AST back to string form
This is required for PEP 563 and as such only implements a part of the
unparsing process that covers expressions.
* Add coro.cr_origin and sys.set_coroutine_origin_tracking_depth
* Use coroutine origin information in the unawaited coroutine warning
* Stop using set_coroutine_wrapper in asyncio debug mode
* In BaseEventLoop.set_debug, enable debugging in the correct thread
* Add _Py_GetLocaleconvNumeric() function: decode decimal_point and
thousands_sep fields of localeconv() from the LC_NUMERIC encoding,
rather than decoding from the LC_CTYPE encoding.
* Modify locale.localeconv() and "n" formatter of str.format() (for
int, float and complex to use _Py_GetLocaleconvNumeric()
internally.
- primary change is to add a new default filter entry for
'default::DeprecationWarning:__main__'
- secondary change is an internal one to cope with plain
strings in the warning module's internal filter list
(this avoids the need to create a compiled regex object
early on during interpreter startup)
- assorted documentation updates, including many more
examples of configuring the warnings settings
- additional tests to ensure that both the pure Python and
the C accelerated warnings modules have the expected
default configuration
Add a new argument "-m" to the pdb module to allow
users to run `python -m pdb -m my_module_name`.
This relies on private APIs in the runpy module to work,
but we can get away with that since they're both part of
the standard library and can be updated together if
the runpy internals get refactored.
Even though Python marks any handles it opens as non-inheritable there
is still a race when using `subprocess.Popen` since creating a process
with redirected stdio requires temporarily creating inheritable handles.
By implementing support for `subprocess.Popen(close_fds=True)` we fix
this race.
In order to implement this we use PROC_THREAD_ATTRIBUTE_HANDLE_LIST
which is available since Windows Vista. Which allows to pass an explicit
list of handles to inherit when creating a process.
This commit also adds `STARTUPINFO.lpAttributeList["handle_list"]`
which can be used to control PROC_THREAD_ATTRIBUTE_HANDLE_LIST
directly.
Brett Cannon
Serhiy Storchaka
Miss Islington (bot)
Nick Coghlan
Ned Deily
Christian Heimes
Ivan Levkivskyi
Mark Shannon
Raymond Hettinger
Victor Stinner
Eric V. Smith
Yury Selivanov
Guido van Rossum
Bo Bayles
Ilya Kulakov
Barry Warsaw
Nathaniel J. Smith
Sanyam Khurana
Mario Corchero
Segev Finer